[Q49-Q69] Updated Jan-2024 Exam Engine or PDF for the CPIM-Part-2 Tests Free Updated Today!

Updated Jan-2024 Exam Engine or PDF for the CPIM-Part-2 Tests Free Updated Today!

Ultimate Guide to Prepare CPIM-Part-2 with Accurate PDF Questions

NEW QUESTION # 49
Which of the following types of operational strategies typically would result in the lowest inventory cost?

• A. Hybrid
• B. Level
• C. Chase
• D. Mixed-model

Answer: C

Explanation:
Explanation
A chase operational strategy is one that adjusts production to match the demand pattern. This means that the inventory level is kept low, as the output is synchronized with the demand. This reduces the inventory cost, as there is less need for holding, ordering, and carrying inventory. A chase strategy also minimizes the risk of obsolescence, spoilage, or excess inventory.
A level operational strategy is one that maintains a constant output rate, production rate, or workforce level.
This means that the inventory level fluctuates, as the output may not match the demand. This increases the inventory cost, as there is more need for holding, ordering, and carrying inventory. A level strategy also increases the risk of stockouts, overstocking, or waste.
A mixed-model operational strategy is one that produces several products with the same resources. This means that the inventory level varies, as the output depends on the product mix and the demand. This may increase or decrease the inventory cost, depending on the product characteristics, demand variability, and resource utilization. A mixed-model strategy also requires more flexibility and coordination in production planning and scheduling.
A hybrid operational strategy is one that combines elements of chase and level strategies. This means that the inventory level is balanced, as the output is partly adjusted to the demand and partly kept constant. This may increase or decrease theinventory cost, depending on the degree of adjustment and constancy. A hybrid strategy also requires more trade-offs and compromises in production decision making.
References:
APICS Exam Handbook, page 12
CPIM Part 1 Study Guide, page 19
CPIM Part 2 Study Guide, page 17

NEW QUESTION # 50
The results from responding to uncertainty in the supply chain by exaggerating lead times and increasing lot sizes is called:

• A. forward integration.
• B. process train.
• C. bullwhip effect.
• D. supply and demand.

Answer: C

Explanation:
Explanation
The results from responding to uncertainty in the supply chain by exaggerating lead times and increasing lot sizes is called the bullwhip effect. The bullwhip effect is a phenomenon that occurs when small changes in demand at the downstream end of the supply chain (such as retailers or customers) cause larger and larger fluctuations in demand at the upstream end of the supply chain (such as wholesalers, distributors, or manufacturers). The bullwhip effect can create inefficiencies, waste, and costs in the supply chain, as well as reduce customer satisfaction and profitability.
One of the causes of the bullwhip effect is the response to uncertainty in the supply chain by exaggerating lead times and increasing lot sizes. Lead time is the time between placing an order and receiving it from a supplier.
Lot size is the quantity of units ordered or produced at a time. When there is uncertainty or variability in demand or supply, such as due to seasonality, promotions, disruptions, or forecasting errors, some supply chain members may try to cope by exaggerating lead times and increasing lot sizes. For example, a retailer may increase its safety stock or reorder point to avoid stockouts or delays, or a manufacturer may produce more than needed to take advantage of economies of scale or discounts. However, these actions can have unintended consequences, as they can distort the demand information and amplify the demand variability along the supply chain. This can result in excess inventory, low inventory turnover, high holding costs, poor service levels, lost sales, obsolete products, or capacity issues.
To prevent or reduce the bullwhip effect caused by responding to uncertainty in the supply chain by exaggerating lead times and increasing lot sizes, some possible solutions are:
Improving communication and collaboration among supply chain members to share accurate and timely demand information and forecasts.
Reducing lead times and lot sizes by using lean production techniques, just-in-time inventory systems, or quick response methods.
Implementing vendor-managed inventory (VMI) systems, where suppliers are responsible for managing and replenishing the inventory of their customers based on their actual consumption data.
Adopting advanced technologies, such as radio-frequency identification (RFID), artificial intelligence (AI), or blockchain, to enhance visibility, traceability, and coordination in the supply chain.
References := Bullwhip Effect: Meaning, Example, Impact - Investopedia, Bullwhip Effect - What Is It, Causes, Supply Chain, Examples, Bullwhip Effect: Example, Causes, and Impact on Supply Chain

NEW QUESTION # 51
The cost accountant has discovered a consistent overage in actual run time for one operation. This informationshould besent first to the:

• A. product manager to increase the selling price of the product.
• B. quality manager to add a new quality measurement to the operation.
• C. production supervisor to review and explain the overage.
• D. the engineering manager to evaluate the run time for the routing.

Answer: D

Explanation:
Explanation
The information about the consistent overage in actual run time for one operation should be sent first to the engineering manager to evaluate the run time for the routing. A routing is a document that specifies the sequence of operations and work centers required to produce a product or feature. A run time is the amount of time needed to perform an operation or a task at a work center. An overage in actual run time means that the actual time spent on an operation or a task is more than the planned or standard time. This can result in lower efficiency, productivity, or quality, as well as higher costs, waste, or delays.
The engineering manager is responsible for designing and maintaining the routing and the run time for each operation or task. The engineering manager can evaluate the run time for the routing by comparing the actual and planned times, identifying the causes of the overage, and taking corrective actions. For example, the engineering manager may:
Review the accuracy and validity of the planned or standard time, and update it if necessary.
Analyze the performance and capability of the machines, equipment, or labor involved in the operation or task, and improve them if needed.
Investigate the presence of any errors, defects, rework, or variability in the operation or task, and eliminate them if possible.
Implement lean production techniques, such as value stream mapping, waste reduction, or continuous improvement, to optimize the operation or task.
The other options are not appropriate for sending the information about the consistent overage in actual run time for one operation first. The product manager is not responsible for designing or maintaining the routing or the run time for each operation or task. The product manager is responsible for managing and marketing the product or feature, such as defining its specifications, features, price, or promotion. Increasing the selling price of the product is not a solution for addressing the overage in actual run time, as it may reduce customer demand or satisfaction, as well as increase competition. The quality manager is not responsible for designing or maintaining the routing or the run time for each operation or task. The quality manager is responsible for ensuring and improving the quality of the product or feature, such as setting quality standards, implementing quality control methods, or conducting quality audits. Adding a new qualitymeasurement to the operation is not a solution for addressing the overage in actual run time, as it may increase complexity or cost without improving efficiency or productivity. The production supervisor is not responsible for designing or maintaining the routing or the run time for each operation or task. The production supervisor is responsible for overseeing and coordinating the production activities at a work center, such as scheduling operations, assigning resources, monitoring performance, or resolving issues. Reviewing and explaining the overage in actual run time is not a solution for addressing it, as it does not identify or eliminate its causes.
References := [Routing - an overview | ScienceDirect Topics], [Run Time - an overview | ScienceDirect Topics], [Engineering Manager Job Description - Betterteam], [Product Manager Job Description - Betterteam], [Quality Manager Job Description - Betterteam], [Production Supervisor Job Description - Betterteam]

NEW QUESTION # 52
An organization has seen inventory increase every month for the past year and financial performance has net met expectations. Which of the following processes would mostappropriately address correctingthe problem?

• A. Sales and operations planning (S&OP)
• B. Detailed material planning
• C. Business planning
• D. Master scheduling

Answer: A

Explanation:
Explanation
Sales and operations planning (S&OP) is a process that aligns the sales plan, the production plan, the inventory plan, and the financial plan to achieve the business objectives. S&OP helps to balance supply and demand, optimize resources, reduce inventory costs, and improve customer service. S&OP is done on an aggregate or family level, and covers a sufficient span of time to make sure that the necessary resources will be available. S&OP also involves regular reviews and updates of the plans based on the changes in the market and the company's performance.
Business planning is a process that defines the long-term vision, mission, goals, and strategies of the organization. Business planning provides the direction and framework for the operational plans, but does not address the specific issues of inventory management and financial performance.
Detailed material planning is a process that determines the quantity and timing of material requirements for each item or component in the production plan. Detailed material planning is based on the master schedule, which is derived from the S&OP. Detailed material planning does not address the alignment of sales and operations at an aggregate level.
Master scheduling is a process that translates the S&OP into a detailed plan for each product or service in a specific time period. Master scheduling specifies the quantityand timing of finished goods to be produced or delivered to meet the demand. Master scheduling is dependent on the S&OP, and does not address the coordination of sales and operations at an aggregate level.
References:
APICS Exam Handbook, page 12
CPIM Part 1 Study Guide, page 19
CPIM Part 2 Study Guide, page 17
Sales and Operations Planning (S&OP) 101| Smartsheet
Sales, Inventory & Operations Planning - What It Is and How to Operate

NEW QUESTION # 53
Which of the following statements is true about the mean time between failures (MTBF) measure?

• A. Itis the same as operating life or service life.
• B. Itis used for non-repairable products.
• C. An increase in MTBF is proportional to an increase in quality.
• D. Itis a useful measure of reliability.

Answer: D

Explanation:
Explanation
Mean time between failures (MTBF) is the predicted elapsed time between inherent failures of a mechanical or electronic system during normal system operation1. MTBF can be calculated as the arithmetic mean (average) time between failures of a system1. MTBF is a useful measure of reliability, because it indicates how long a system is likely to work before failing. The higher the MTBF, the more reliable the system2. Reliability is the probability that a system will perform its intended function without failure for a specified period of time under specified conditions3.
The other statements about MTBF are false. MTBF is not used for non-repairable products, but for repairable systems. For non-repairable products, mean time to failure (MTTF) is used instead4. MTTF is the expected time to failure for a non-repairable system1. An increase in MTBF is not proportional to an increase in quality, because quality is not only determined by reliability, but also by other factors such as performance, functionality, durability, and customer satisfaction5. MTBF is not the same as operating life or service life, because operating life or service life is the total time that a system can operate before it reaches the end of its useful life, while MTBF is the average time between failures during the operating life6.

NEW QUESTION # 54
In which of the following phases of the product life cycle is product price most effective in influencing demand?

• A. Introduction
• B. Decline
• C. Growth
• D. Maturity

Answer: A

Explanation:
Explanation
Product price is most effective in influencing demand in the introduction phase of the product life cycle. The product life cycle is a concept that describes the stages that a product goes through fromits development to its decline. The introduction phase is the first stage, when the product is launched into the market and consumers are made aware of its existence and benefits. In this phase, product price can have a significant impact on the demand for the product, depending on the following factors:
The degree of product innovation: If the product is highly innovative and offers a unique value proposition to customers, it may have a high price elasticity of demand, meaning that customers are willing to pay a high price for it regardless of the availability of substitutes or competitors1. This is often the case for products that create a new market or category, such as the iPhone or the Kindle2. On the other hand, if the product is not very innovative and offers a similar value proposition to existing products, it may have a low price elasticity of demand, meaning that customers are sensitive to price changes and will switch to cheaper alternatives or competitors if the price is too high1. This is often the case for products that enter an existing market or category, such as generic drugs or copycat products3.
The degree of market competition: If the product faces little or no competition in the market, it may have more pricing power and flexibility, meaning that it can charge a high price and still generate high demand4. This is often the case for products that have a strong brand image, a loyal customer base, or a patent protection5. On the other hand, if the product faces high competition in the market, it may have less pricing power and flexibility, meaning that it has to charge a low price or offer discounts and promotions to attract and retain customers4. This is often the case for products that have a weak brand image, a low customer loyalty, or a short product life cycle.
Therefore, product price can be an effective tool to influence demand in the introduction phase of the product life cycle, depending on how innovative and competitive the product is. A high price can signal quality, exclusivity, and differentiation, while a low price can signal affordability, accessibility, and penetration.
References: Price Elasticity of Demand - Definition & Formula - Corporate Finance Institute; Product Life Cycle Explained: Stage and Examples - Investopedia; Generic Drugs - Overview - Mayo Clinic; Pricing Strategies For The Product Life Cycle (Made Simple) - Tyonote; Brand Image - Definition & Examples - Marketing Tutor; [Customer Loyalty - Definition & Examples - Marketing Tutor].

NEW QUESTION # 55
The trade-off of increasing safety stock to improve customer fill rate would be a decrease in:

• A. A pipeline inventory.
• B. inventory turns.
• C. sales revenue.
• D. transportation costs.

Answer: B

Explanation:
Explanation
Inventory turns, also known as inventory turnover or stock turnover, is a measure of how many times a company sells and replaces its inventory in a given period. It is calculated as the ratio of cost of goods sold (COGS) to average inventory1. A higher inventory turnover indicates that the company is selling its inventory quickly and efficiently, while a lower inventory turnover indicates that the company is holding too much inventory or having difficulty selling its products.
Increasing safety stock to improve customer fill rate would result in a decrease in inventory turns, as it would increase the average inventory level. Safety stock is the extra inventory that is held to prevent stockouts and meet unexpected demand2. Customer fill rate is the percentage of customer orders that are fulfilled from available inventory without delay3. Increasing safety stock can improve customer fill rate by reducing the risk of stockouts and ensuring high service levels. However, increasing safety stock also increases the inventory carrying costs and risks, such as storage, handling, obsolescence, shrinkage, and opportunity costs4. Therefore, increasing safety stock is a trade-off between customer satisfaction and inventory efficiency.
The other options are not correct. Pipeline inventory is the inventory that is in transit between locations or stages in the supply chain5. Increasing safety stock would not affect pipeline inventory, as it is determined by the lead time and demand rate. Transportation costs are the expenses incurred for moving goods from one location to another6. Increasing safety stock would not affect transportation costs, as it is determined by the distance, mode, volume, and frequency of transportation. Sales revenue is the income generated from selling goods or services to customers7. Increasing safety stock would not affect sales revenue directly, as it is determined by the price and quantity of sales. However, increasing safety stock may have an indirect positive effect on sales revenue by improving customer satisfaction and loyalty.
References : Inventory Turnover Ratio | Formula | Calculator (Updated 2021); Safety Stock: The Ultimate Guide; Fill Rate - Definition, Formula & Example; Inventory Carrying Cost: Definition & Formula; Pipeline Inventory: Definition & Example; Transportation Costs: Definition & Examples; Sales Revenue: Definition & Examples.

NEW QUESTION # 56
Which of the following risk management strategies assumes that losses in one part of the supplychain will be offset by gainsin another?

• A. Speculative
• B. Fluctuation
• C. Flexible
• D. Hedge 5

Answer: D

Explanation:
Explanation
Hedge is a risk management strategy that assumes that losses in one part of the supply chain will be offset by gains in another. Hedge is a method of reducing the exposure to price fluctuations, currency fluctuations, or other uncertainties by taking a position in a related market or asset that moves in the opposite direction. Hedge helps to protect the profitability and cash flow of the supply chain by locking in the prices or rates at a certain level. For example, a company that imports raw materials from another country may hedge against the exchange rate risk by buying a forward contract or an option that guarantees a fixed rate for the currency conversion.
The other options are not risk management strategies that assume that losses in one part of the supply chain will be offset by gains in another. Flexible is a risk management strategy that allows the supply chain to adapt to changing conditions and customer preferences by using multiple sources, modes, or routes. Fluctuation is not a risk management strategy, but a term that describes the variation or volatility of a market or asset over time. Speculative is not a risk management strategy, but a term that describes an activity or investment that involves a high degree of uncertainty or risk, with the expectation of earning a high return. References: CPIM Exam Content Manual Version 7.0, Domain 7: Plan and Manage Distribution, Section 7.1: Distribution Planning Concepts, p. 40; Hedging; Hedging Definition.

NEW QUESTION # 57
A planner has chosen to increase the order point for a raw material. Which of the following costs is most likely to increase?

• A. Carrying
• B. Ordering
• C. Landed
• D. Product

Answer: A

Explanation:
Explanation
Carrying cost is the cost of holding inventory over a period of time. Carrying cost includes the cost of storage, insurance, taxes, obsolescence, spoilage, and opportunity cost of capital. Carrying cost is usually expressed as a percentage of the inventory value per year. An order point is the level of inventory that triggers a replenishment order. An order point is calculated based on the demand rate, the lead time, and the safety stock.
An order point is used to maintain a balance between inventory availability and inventory cost. A planner who chooses to increase the order point for a raw material is most likely to increase the carrying cost, as a higher order point means a higher average inventory level, which in turn means a higher carrying cost. Increasing the order point may reduce the risk ofstockouts and improve customer service, but it also increases the inventory investment and its associated costs.
The other options are not likely to increase as a result of increasing the order point. Ordering cost is the cost of placing and receiving an order. Ordering cost includes the cost of processing, transportation, inspection, and setup. Ordering cost is usually expressed as a fixed amount per order. Ordering cost is not affected by the order point, but by the order quantity and the number of orders. Landed cost is the total cost of delivering a product or service to the customer. Landed cost includes the cost of production, transportation, taxes, duties, and fees. Landed cost is usually expressed as a percentage of the product or service value. Landed cost is not affected by the order point, but by the sourcing, pricing, and logistics decisions. Product cost is the total cost of producing a product or service. Product cost includes the cost of materials, labor, and overhead. Product cost is usually expressed as a variable amount per unit. Product cost is not affected by the order point, but by the production methods, techniques, and efficiency. References: CPIM Exam Content Manual Version 7.0, Domain 5: Plan and Manage Inventory, Section 5.1: Inventory Management Concepts, p. 30; Order Point; Carrying Cost.

NEW QUESTION # 58
The cumulative available-to-promise (ATP) method is based on an assumption that available inventory in a period can becommitted to demand in that period and:

• A. future periods beyond the DTF.
• B. any future period in the planning horizon.
• C. any period before the demand time fence (DTF).
• D. future periods with a planned receipt.

Answer: B

NEW QUESTION # 59
When procuring for innovative products, the focus should be on:

• A. lead times.
• B. lot sizes.
• C. unit cost.
• D. total landed cost.

Answer: D

Explanation:
Explanation
When procuring for innovative products, the focus should be on the total landed cost, which is the sum of all costs associated with making and delivering products to the point where they are used. This includes not only the unit cost, but also the transportation, handling, inventory, taxes, duties, and other fees associated with the procurement process. By focusing on the total landed cost, procurement can evaluate the true value of innovative products and compare them with alternative solutions. Focusing on unit cost alone may overlook the potential benefits of innovation, such as improved quality, performance, or sustainability. Lead times and lot sizes are also important factors to consider, but they are not the main focus when procuring for innovation. References : CPIM Part 2 Exam Content Manual, Domain 4: Plan and Manage Supply, Section A:
Supply Management Concepts and Approaches, Subsection 2: Procurement Strategies and Techniques, Page
17.

NEW QUESTION # 60
A firm produces a moderate variety of products to stock in a single plant. The plant is organized in a functional layout withsome work cells. Which of the following indicators most appropriately would be used to evaluate the effectiveness of thedetailed capacity planning processes?

• A. Level of finished goods inventory
• B. Percentage of master schedule attained
• C. Units of output per direct labor hour
• D. Change in level of work-in-process (WIP) inventory

Answer: D

Explanation:
Explanation
The change in level of work-in-process (WIP) inventory is the most appropriate indicator to evaluate the effectiveness of the detailed capacity planning processes for a firm that produces a moderate variety of products to stock in a single plant. Detailed capacity planning is the process of determining the quantity and timing of resources, such as labor, equipment, and materials, needed to execute the master production schedule (MPS) at the work center level1. The MPS is a plan that specifies the quantity and timing of end items to be produced in a given time period2. The change in level of WIP inventory is a measure of the difference between the amount of WIP inventory at the beginning and at the end of a period3. WIP inventory consists of partially completed products or components that are waiting for further processing or assembly.
The change in level of WIP inventory can indicate how well the detailed capacity planning processes are aligned with the MPS and the actual demand. A positive change in WIP inventory means that more products or components are being produced than consumed, which implies that there is excess capacity or insufficient demand. A negative change in WIP inventory means that more products or components are being consumed than produced, which implies that there is insufficient capacity or excess demand. A zero or minimal change in WIP inventory means that the production and consumption rates are balanced, which implies that there is optimal capacity and demand. Therefore, by monitoring the change in level of WIP inventory, the firm can evaluate whether its detailed capacity planning processes are effective in meeting customer needs and expectations, as well as minimizing inventory costs and maximizing resource utilization.
The other options are not as appropriate indicators to evaluate the effectiveness of the detailed capacity planning processes for a firm that produces a moderate variety of products to stock in a single plant. Units of output per direct labor hour is a measure of labor productivity, which indicates how efficiently labor is used to produce output. However, labor productivity does not reflect the effectiveness of detailed capacity planning processes, because it does not account for other factors that affect production, such as equipment, materials, quality, or demand. Percentage of master schedule attained is a measure of schedule performance, which indicates how well the actual production matches the planned production. However, schedule performance does not reflect the effectiveness of detailed capacity planning processes, because it does not account for other factors that affect production, such as capacity constraints, resource availability, or customer satisfaction.
Level of finished goods inventory is a measure of inventory management, which indicates how much inventory is available to meet customer orders. However, finished goods inventory does not reflectthe effectiveness of detailed capacity planning processes, because it does not account for other factors that affect production, such as product variety, lead time, or quality.
References: Detail Capacity Planning - Capacity Planning - Gaebler.com Resources ...; Master Production Schedule (MPS) Definition | Operations & Supply Chain Dictionary; Work-in-Process Inventory: Definition & Example - Video & Lesson Transcript | Study.com; [Work-in-Process (WIP) Definition - Investopedia];
[Labor Productivity Definition - Investopedia]; [Labor Productivity: Definition & Statistics - Video & Lesson Transcript | Study.com]; [Schedule Performance Index (SPI) Definition - Investopedia]; [Schedule Performance Index (SPI) & Cost Performance Index (CPI) in Project Cost Management]; [Finished Goods Inventory: Definition & Formula - Video & Lesson Transcript | Study.com]; [Finished Goods Inventory:
Definition & Example - Video & Lesson Transcript | Study.com].

NEW QUESTION # 61
Components of an organization's immediate industry and competitive environment include:

• A. interest rates.
• B. substitute products.
• C. political factors.
• D. sociocultural forces,

Answer: B

Explanation:
Explanation
An organization's immediate industry and competitive environment includes the factors that directly affect its ability to compete and achieve its goals. These factors are often analyzed using Porter's Five Forces model, which identifies five competitive forces that shape the industry: threat of new entrants, power of suppliers, power of buyers, threat of substitute products, and rivalry among existing competitors1. Among these forces, substitute products are the most relevant component of the immediate industry and competitive environment, as they represent the alternative solutions that customers can choose instead of the organization's products. Substitute products can reduce the demand and profitability of the organization's products, as well as increase the price sensitivity and bargaining power of customers1.
The other options are not components of the immediate industry and competitive environment, but rather components of the general or macro environment. The general or macro environment includes the broader factors that affect all organizations in a society or a market, such as political, economic, social, technological, environmental, and legal factors2. These factors are often analyzed using PESTEL analysis, which helps organizations identify the opportunities and threats arising from the external environment2. Among these factors, political factors include the government policies, regulations, and stability that affect the organization's operations and decisions2. Interest rates are part of the economic factors that include the market conditions, growth, inflation, unemployment, and exchange rates that affect the organization's performance and profitability2. Sociocultural forces are part of the social factors that include the demographics, values, beliefs, lifestyles, and preferences of the customers and society that affect the organization's demand and customer satisfaction2.
References : Competitive Environment: Definition, Examples & Factors - StudySmarter US; Industry Analysis
| Porter's Five Forces | Competition.

NEW QUESTION # 62
Which of the following methods most likely introduces a temporary variance betweenthe inventory balance and theinventory record?

• A. Inventory write-off
• B. Cycle count
• C. Kanban
• D. Backflushing

Answer: B

Explanation:
Explanation
Resource planning is a planning module that considers the longest-range planning goals. Resource planning is a method of determining the long-term capacity and resource requirements for a manufacturing system, based on the aggregate production plan, the sales and operations plan, and the business plan. Resource planning helps to align the production capacity and resources with the strategic objectives and goals of the organization.
Resource planning considers the longest-range planning goals, which are usually expressed in terms of years or quarters.
The other options are not planning modules that consider the longest-range planning goals. Capacity requirements planning (CRP) is a planning module that calculates the capacity and load for each work center in a manufacturing system, based on the material requirements plan, the routing file, and the open order file.
CRP helps to identify and resolve the capacity constraints and bottlenecks in the production process. CRP considers the short-range planning goals, which are usually expressed in terms of days or weeks. Input/output analysis is a planning module that compares the actual input/output of each work center in a manufacturing system with the planned input/output, based on the capacity requirements plan and the shop floor data.
Input/output analysis helps to monitor and control the performance and efficiency of each work center.
Input/output analysis considers the short-range planning goals, which are usually expressed in terms of days or weeks. Rough-cut capacity planning (RCCP) is a planning module that estimates the feasibility and adequacy of the key resources or work centers in a manufacturing system, based on the master production schedule and the bill of resources. RCCP helps to validate and adjust the master production schedule according to the available capacity and resources. RCCP considers the medium-range planning goals, which are usually expressed in terms of months or weeks. References: CPIM Exam Content Manual Version 7.0, Domain 4: Plan and Manage Supply, Section 4.2: Supply Planning Methods, p. 26; Resource Planning; Capacity Requirements Planning.

NEW QUESTION # 63
An online retailer moves from delivering hard copy books to offering digital downloads only. This action may result in an increased possibility of:

• A. forecast inaccuracy.
• B. supply delays.
• C. supply disruptions.
• D. loss of intellectual property.

Answer: D

Explanation:
Explanation
Offering digital downloads only may result in an increased possibility of loss of intellectual property, as this exposes the online retailer to the risk of cyber theft and piracy. Digital downloads are easier to copy, distribute, and modify without authorization than hard copy books, and the online retailer may lose control over its IP rights and revenues. Cyber thieves may hack into the online retailer's network and steal its IP assets, such as the content, design, and format of the books. Pirates may also offer illegal copies of the books to consumers at lower prices or for free, undermining the online retailer's market share and profitability. According to Deloitte Insights, IP cyber theft has largely remained in the shadows compared with more familiar cybercrimes such as the theft of credit card, consumer health, and other personally identifiable information1. However, IP cyber theft can have serious consequences for a company's future, as IP is the heart of the 21st-century company, an essential motor driving innovation, competitiveness, and the growth of businesses and the economy as a whole1. The WIPO Magazine also notes that digital technology has made IP theft easier, as Bad Actors use technology to flood the online market with pirated and counterfeit goods2. The impact of IP theft on the economy can be significant, as it can result in loss of legitimate sales, reduced tax revenues, lower employment opportunities, and diminished incentives for innovation3. Therefore, an online retailer that moves from delivering hard copy books to offering digital downloads only should take appropriate measures to protect its IP from cyber theft and piracy. This may include using encryption, digital rights management, watermarking, authentication, and monitoring technologies, as well as educating consumers about the value and benefits of legal downloads

NEW QUESTION # 64
The cumulative available-to-promise (ATP) method is based on an assumption that available inventory in a period can becommitted to demand in that period and:

• A. future periods beyond the DTF.
• B. any future period in the planning horizon.
• C. any period before the demand time fence (DTF).
• D. future periods with a planned receipt.

Answer: B

Explanation:
Explanation
The cumulative available-to-promise (ATP) method is based on an assumption that available inventory in a period can be committed to demand in that period and any future period in the planning horizon. The planning horizon is the time span for which plans are made and executed1. The cumulative ATP is a running total of the ATP figure in the master schedule, which shows the planned production or purchase of a product over a series of time periods2. The cumulative ATP method allows the company to account for future shortages and build up inventory for large or seasonal orders3.
The other options are not correct. The demand time fence (DTF) is a point in the near future, usually equal to the cumulative lead time, beyond which changes to the master schedule are not allowed4. The cumulative ATP method does not depend on the DTF, as it considers all future periods in the planning horizon, regardless of whether they are inside or outside the DTF. Future periods with a planned receipt are periods where there is an expected supply of inventory from production or purchase orders2. The cumulative ATP method does not only commit inventory to these periods, but also to any other periods where there is demand.
References : Available-to-Promise (ATP) - Tutorial; Planning Horizon Definition; Demand Time Fence (DTF) Definition; Cumulative Available-to-Promise | Cargoz.

NEW QUESTION # 65
In a lean environment, the batch-size decision for planning "A" items would be done by:

• A. min-max.
• B. lot-for-lot (L4L).
• C. periodic order quantity.
• D. least total cost.

Answer: B

Explanation:
Explanation
In a lean environment, the batch-size decision for planning "A" items would be done by lot-for-lot (L4L). A lean environment is a production system that aims to eliminate waste and maximize value by applying the principles and practices of lean manufacturing1. "A" items are the most important items in an inventory system, based on the Pareto principle or the 80/20 rule, which states that 80%of the effects come from 20% of the causes2. Lot-for-lot (L4L) is an inventory ordering policy that orders exactly the quantity needed to meet the demand for each period3.
The reason why L4L is the preferred batch-size decision for planning "A" items in a lean environment is because it minimizes the inventory holding costs and reduces the risk of obsolescence or deterioration of the items3. L4L also supports the concept of pull production, which is a key element of lean manufacturing. Pull production is a method of controlling the flow of materials and information by producing only what is requested by the downstream customers or processes4. L4L aligns the production and consumption rates of
"A" items, which are typically high-demand and high-value items, and avoids overproduction or underproduction. L4L also enables faster feedback and learning, as well as better responsiveness to customer needs and expectations.
The other options are not as suitable for planning "A" items in a lean environment. Least total cost is an inventory ordering policy that orders the quantity that minimizes the sum of ordering costs and holding costs5.
However, this policy does not consider the demand variability or customer service level, and may result in large batch sizes that increase inventory levels and waste. Min-max is an inventory ordering policy that orders a fixed quantity whenever the inventory level falls below a minimum level6. However, this policy does not reflect the actual demand or consumption rate, and may result in excess inventory or stockouts. Periodic order quantity is an inventory ordering policy that orders a variable quantity at fixed time intervals. However, this policy does not synchronize the production and consumption rates, and may result in mismatched supply and demand.
References: Lean Manufacturing - Definition & Principles - ASQ; Pareto Principle - Definition & Examples - Investopedia; Lot-for-Lot (L4L) Definition | Operations & Supply Chain Dictionary; Pull Production - Definition & Examples - ASQ; Economic Order Quantity (EOQ) Definition - Investopedia; Min-Max Inventory Management: Definition & Examples - Video & Lesson Transcript | Study.com; [Periodic Order Quantity (POQ) Definition | Operations & Supply Chain Dictionary].

NEW QUESTION # 66
Which of the following forms of data is required for rough-cut capacity planning (RCCF)?

• A. Work center queues
• B. Critical work center availability
• C. Resource requirements plan
• D. Current work in process (WIP)

Answer: B

Explanation:
Explanation
Rough-cut capacity planning (RCCP) is a long-term capacity planning technique that validates the master production schedule (MPS) by comparing the required capacity and the available capacity of critical resources.
Critical resources are those that have the most impact on the production process, such as machines, labor, or materials. RCCP helps to identify any potential imbalances or bottlenecks in the production system and to adjust the MPS or the resource availability accordingly.
To perform RCCP, one of the forms of data that is required is critical work center availability. A work center is a location where one or more resources perform a specific operation or a group of operations. A critical work center is a work center that has a high utilization rate, a low flexibility, or a high influence on the production output. Critical work center availability is the amount of time or capacity that a critical work center can offer for production activities. Critical work center availability can be affected by factors such as shifts, holidays, maintenance, breakdowns, or setups. RCCP uses critical work center availability to determine whether there is enough capacity to meet the planned production.
Current work in process (WIP) is not a form of data that is required for RCCP. WIP is the inventory of partially finished goods that are waiting for further processing or assembly. WIP is not relevant for RCCP, as RCCP focuses on the future demand and capacity, not the current inventory status.
Resource requirements plan is not a form of data that is required for RCCP. Resource requirements plan is the output of RCCP, not the input. Resource requirements plan is a report that shows the projected load and capacity of each critical resource over a planning horizon. Resource requirements plan can help to identify any gaps or surpluses in capacity and to take corrective actions.
Work center queues are not a form of data that is required for RCCP. Work center queues are the waiting lines of jobs or orders at a work center. Work center queues are an indicator of short-term capacity issues, such as delays, backlogs, or congestion. Work center queues are not relevant for RCCP, as RCCP focuses on the long-term capacity planning, not the short-term scheduling.
References := Guide to Rough-Cut Capacity Planning | Smartsheet, Guide to Rough Cut Capacity Planning - Definition and Example, ROUGH-CUT CAPACITY PLANNING - Operations Management: An Integrated
..., Rough-cut Capacity Planning - Infor Documentation Central

NEW QUESTION # 67
What is the main negative effect of changing the due dates of open orders?

• A. The schedule does not support demand.
• B. The customer service level decreases.
• C. The schedule information becomes inaccurate.
• D. It leads to "nervousness" in the schedule.

Answer: D

Explanation:
Explanation
Nervousness is a term that describes the instability or variability of a production schedule due to frequent changes in demand, supply, or capacity. Nervousness can cause disruption, inefficiency, and waste in the production system, as well as lower customer service and satisfaction. Changing the due dates of open orders is a main cause of nervousness in the schedule, as it affects the priority and sequence of the production orders, and may require rescheduling or replanning of the resources and activities. Changing the due dates of open orders may be necessary to accommodate urgent or unexpected customer requests, but it also increases the complexity and uncertainty of the production process.
The other options are not the main negative effects of changing the due dates of open orders. The schedule information becomes inaccurate is not a negative effect, but a consequence of changing the due dates of open orders. The schedule information reflects the planned input/output of the production system, and it needs to be updated and communicated whenever there are changes in the due dates of open orders. The customer service level decreases is not a negative effect, but a possible outcome of changing the due dates of open orders. The customer service level measures the degree to which the production system meets or exceeds the customer expectations in terms of quality, quantity, and delivery. Changing the due dates of open orders may improve the customer service level for some customers, but it may also deteriorate it for others, depending on how the changes affect their orders. The schedule does not support demand is not a negative effect, but a potential problem of changing the due dates of open orders. The schedule should support demand by ensuring that the production system can produce or deliver what the customers want, when they want it. Changing the due dates of open orders may create a mismatch between the schedule and demand, which may result in overproduction or underproduction, stockouts or excess inventory, or late or early deliveries. References: CPIM Exam Content Manual Version 7.0, Domain 6: Plan, Manage, and Execute Detailed Schedules, Section 6.1: Detailed Scheduling Concepts, p. 36; Nervousness; Production Schedule.

NEW QUESTION # 68
Which of the following is the fundamental difference between finite loading and other capacity planning approaches?

• A. It is highly dependent on advanced computer software to function effectively.
• B. It considers adjustments to plans based on planned capacity utilization.
• C. It can use historical information to drive decision-making processes.
• D. It is only managed by shop floor supervisors.

Answer: B

Explanation:
Explanation
Finite loading is a capacity planning approach that considers adjustments to plans based on planned capacity utilization. It does not allow overloading of resources and schedules operations only when there is enough capacity available. Finite loading creates a more realistic schedule for the production processes than other approaches, such as infinite loading, that ignore the capacityconstraints and assume that the due dates of orders are absolute. Finite loading is not highly dependent on advanced computer software, although it can benefit from it. It is not only managed by shop floor supervisors, but also by planners and schedulers. It can use historical information, but it is not the only approach that can do so. Therefore, the fundamental difference between finite loading and other capacity planning approaches is that it considers adjustments to plans based on planned capacity utilization. References := CPIM Part 2 Exam Content Manual, Domain 6: Plan, Manage, and Execute Detailed Schedules, Section B: Schedule Production Activities, Subsection 1: Develop a detailed production schedule (p. 28)

NEW QUESTION # 69
......

Pass APICS With ActualTestsQuiz Exam Dumps: https://www.actualtestsquiz.com/CPIM-Part-2-test-torrent.html

Fully Updated CPIM-Part-2 Dumps - 100% Same Q&A In Your Real Exam: https://drive.google.com/open?id=1gcjimMSHc4xp8TUgVHmG7zxgmLgpRBu7