Certification Training for DES-DD33 Exam Dumps Test Engine [2022]
Jan 23, 2022 Step by Step Guide to Prepare for DES-DD33 Exam
EMC DES-DD33 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
NEW QUESTION 23
A PowerProtect DD system is configured for VTL. The backup application requires a minimum tape capacity of 800 GiB.
What is the minimum tape type to support this requirement?
- A. LTO-3
- B. LTO-5
- C. LTO-4
- D. LTO-2
Answer: C
NEW QUESTION 24
A backup administrator is tasked with verifying the compression savings of a PowerProtect DD9900.
Which compression algorithm will they see enabled by default?
- A. lzw
- B. gz
- C. lz
- D. gzfast
Answer: D
Explanation:
The gzfast compression algorithm is the default local compression method used on all DD6900, DD9400, and DD9900 appliances.
NEW QUESTION 25
How many hops should the fabric configuration be limited to when implementing the DD VTL?
- A. 1 hop
- B. 2 hops
- C. 4 hops
- D. 3 hops
Answer: B
NEW QUESTION 26
What system role is required to create the second security officer for a PowerProtect DD?
- A. admin
- B. sysadmin
- C. limited-admin
- D. security officer
Answer: D
Explanation:
A security role user, who may be referred to as a security officer, can manage other security officers, authorize procedures that require security officer approval, and perform all tasks supported for user-role users.
NEW QUESTION 27
How can remote logging with a syslog server be configured on a PowerProtect DD system?
- A. Remote logging is enabled by default
- B. Use the DDSM to enable the remote logging
- C. Use the CLI command log host enable
- D. Use the DDMC to enable the remote logging
Answer: C
NEW QUESTION 28
An administrator wants to integrate a PowerProtect DD appliance into their current backup environment using CIFS, NFS, DD Boost, and VTL.
Which backup applications support these protocols?
- A. Veritas NetBackup and Dell EMC NetWorker
- B. Commvault Simpana and Veritas Backup Exec
- C. IBM Spectrum Protect and Veritas NetBackup
- D. Dell EMC Avamar and Dell EMC NetWorker
Answer: A
NEW QUESTION 29
An administrator has retained snapshots for a single MTree and is trying to create a new one. An error message is received.
What is the reason for the failure?
- A. The user does not have the permission to retain more snapshots
- B. The DDOS needs to be upgraded
- C. There are not enough snapshot licenses
- D. The maximum number of snapshots has been exceeded
Answer: D
Explanation:
Note: To identify an MTree that is nearing the maximum number of snapshots, check the Snapshots panel of the MTree page regarding viewing MTree snapshot information.
NEW QUESTION 30
An administrator is migrating their old cloud tier-enabled Data Domain to a new PowerProtect DD appliance with cloud tier. During migration, the administrator recognizes that file system cleaning on the source system is not possible.
What is the most likely cause of this behavior?
- A. Migration will restrict all activities on source system
- B. Source system is running in restricted mode
- C. Migration will restrict all activities on both systems
- D. Filesystem is disabled on source system
Answer: A
NEW QUESTION 31
A storage administrator finished the zoning between the PowerProtect DD and the NetWorker backup server.
How can they verify that the zoning was completed properly and the server HBA are visible?
- A. scsitarget show initiator list
- B. scsitarget show initiator
- C. scsitarget initiator show list
- D. scsitarget initiator list
Answer: C
NEW QUESTION 32
What is a requirement to use the PowerProtect DD HA feature?
- A. Head units and notes require an active/active configuration
- B. Dual set of shared storage configuration
- C. Each head unit requires its own FS25 shelf
- D. A single set of shared storage
Answer: B
NEW QUESTION 33
What is the maximum number of concurrently active MTrees that are supported on any PowerProtect DD appliance with DDOS 7.3?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
NEW QUESTION 34
Following best practices for a PowerProtect DD CIFS environment, what is the recommended SESSTIMEOUT value in seconds?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
SESSTIMEOUT value from the default 45 seconds to 3600 seconds.
NEW QUESTION 35
How many hops should the fabric configuration be limited to when implementing the DD VTL?
- A. 1 hop
- B. 2 hops
- C. 4 hops
- D. 3 hops
Answer: B
Explanation:
Maximum number of hops is two, that is, three DD systems. Directory-to-MTree migration supports backward compatibility up to two previous releases.
NEW QUESTION 36
What happens to the data when it is moved from the active tier to cloud tier?
- A. It is compressed and stored as object storage in a new format
- B. It is compressed and stored in block storage in a new format
- C. It is deduplicated and stored in a file system in the native format
- D. It is deduplicated and stored in object storage in the native format
Answer: C
Explanation:
Every file has a meta-data. Meta-data of the files which is getting moved is stored on active tier and data and metadata is moved into the cloud. There is no multiple data-movement policy set on single mtree. Data moved to particular cloud unit depends on datamovement policy. And only the unique data is sent to the cloud. This is done using the deduplication.
NEW QUESTION 37
When using the DD VTL Tape Out to Cloud feature, which status will a tape show once it is in the cloud tier vault?
- A. Vaulted
- B. Offline
- C. Offsite
- D. Archived
Answer: D
NEW QUESTION 38
What is the correct sequence of steps to configure storage for Dell EMC Cloud Tier in the DD System Manager?
Answer:
Explanation:
NEW QUESTION 39
Which PowerProtect DD procedure uses the DoD/NIST standards to provide data security?
- A. Replication Encryption
- B. Data Sanitization
- C. Encryption
- D. End-to-End Verification
Answer: B
NEW QUESTION 40
Backup administrators have noticed slow backups on the AIX environment.
To fix the issue, what should the set large_send be for each NIC, and what should the NFS option be set to?
- A. no and nfs_rfc1323=0
- B. yes and nfs_rfc1323=0
- C. no and nfs_rfc1323=1
- D. yes and nfs_rfc1323=1
Answer: D
NEW QUESTION 41
Following best practices for a PowerProtect DD NFS environment, what is the recommended value for rsize and wsize?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 42
......
Ultimate Guide to Prepare DES-DD33 Certification Exam for DCS-SA: https://www.actualtestsquiz.com/DES-DD33-test-torrent.html
