[May 24, 2024] Pass Nutanix Certified Professional NCP-MCI-6.5 Exam With 175 Questions
Ultimate Guide to Prepare Free Nutanix NCP-MCI-6.5 Exam Questions and Answer
Nutanix is a leading provider of hyper-converged infrastructure solutions that enable organizations to build and manage their own private clouds. Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) v6.5 certification is one of the most sought-after certifications in the IT industry. It is designed to validate the skills and knowledge required to deploy, administer, and troubleshoot Nutanix infrastructure in a multicloud environment.
NEW QUESTION # 71
A two-node ROBO cluster is configured with a witness VM.
What happens when Node A goes down?
- A. The cluster is unaffected and no administrator intervention is required.
- B. All operations and services on the Node B are shut down and go into a waiting state.
- C. The- cluster becomes unavailable and goes into read-only mode.
- D. Node B sends a leadership request to the Witness VM and goes into single-node mode.
Answer: D
Explanation:
According to the Nutanix Support & Insights, in a two-node ROBO cluster with a witness VM, if one node goes down, the other node sends a leadership request to the witness VM and goes into single-node mode. The cluster remains available and can tolerate another failure of either the witness VM or the network link.
NEW QUESTION # 72
An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.
Which three steps must the administrator take to increase throughput to the host? (Choose three.)
- A. Remove any 1Gb interfaces still connected from the default bond.
- B. Connect the 10Gb interfaces to the physical switch.
- C. Change the bond mode to balance-slb or balance-tcp.
- D. Add a new switch to the network and connect 1Gb interfaces to it.
- E. Change the VLAN ID to a higher priority ID.
Answer: B,C,E
NEW QUESTION # 73
When a configuring a syslog server in Prism Central, what two pieces information are required? (Choose two.)
- A. Transport protocol
- B. Encryption secret
- C. HTTPS URL
- D. IP address/port
Answer: A,D
Explanation:
According to the Nutanix Prism Central Guide, to configure a syslog server in Prism Central, you need to specify the transport protocol (TCP or UDP) and the IP address/port of the syslog server.
NEW QUESTION # 74
An administrator needs to configure a new subnet on an AHV cluster and want to ensure that VMs will automatically be assigned an IP address at creation time.
Which type of network does the administrator need to create?
- A. Dynamic Network
- B. Unmanaged Network
- C. DHCP Network
- D. Managed Network
Answer: D
Explanation:
A managed network is a type of network that can be created on an AHV cluster and allows VMs to automatically be assigned an IP address at creation time. A managed network uses the Nutanix IP Address Management (IPAM) service, which provides DHCP and DNS functionality for the VMs on the network. A managed network can be configured with a subnet range, a default gateway, and DNS servers. The IPAM service will allocate IP addresses from the subnet range to the VMs and register their hostnames in the DNS servers. The IPAM service will also release the IP addresses when the VMs are deleted or moved to another network1.
To create a managed network on an AHV cluster, the administrator can use Prism Element or Prism Central. The steps are as follows2:
In Prism Element, go to the Network Configuration page and click Create Network.
In Prism Central, go to the Networks page and click Create.
Enter a name and description for the network.
Select Managed as the network type.
Enter the subnet range, default gateway, and DNS servers for the network.
Optionally, enable VLAN tagging and enter a VLAN ID for the network.
Click Save.
NEW QUESTION # 75
When a VM is connected to a Nutanix managed network, when is the IP addressed assigned?
- A. When the guest OS receives a DHCP acknowledge.
- B. When the guest OS sends a DHCP request.
- C. When the VM is powered on.
- D. When the vNIC is created on the VM.
Answer: C
Explanation:
When a VM is connected to a Nutanix managed network, the IP address is assigned when the VM is powered on. A Nutanix managed network is a network that is created and managed by Prism Central using IP address management (IPAM). IPAM allows Prism Central to automatically assign IP addresses to VMs from a pool of available addresses in a subnet. IPAM also tracks the IP address usage and availability across clusters and networks4.
When a VM is connected to a Nutanix managed network, the administrator can choose one of the following assignment types for the IP address:
Assign Static IP: This option allows the administrator to manually specify a static IP address for the VM from the subnet range. The IP address will not change unless the administrator changes it.
Assign with DHCP: This option allows Prism Central to dynamically assign an IP address for the VM from the subnet range using DHCP. The IP address may change depending on the DHCP lease time and availability.
No Private IP: This option allows the administrator to skip assigning an IP address for the VM. This option is useful for scenarios where the administrator wants to use an external IPAM solution or assign an IP address later5.
Regardless of the assignment type, the IP address is assigned when the VM is powered on. This is because Prism Central needs to communicate with the hypervisor (AHV or ESXi) to configure the virtual NIC (vNIC) of the VM with the IP address information. This communication can only happen when the VM is in a powered on state6.
NEW QUESTION # 76
Refer to the exhibit.
System Non-Root Partition Usage shows a warning or critical alert The administrator needs to change the frequency of checks and alerts to respond more quickly.
Where in Prism Element should the administrator change the frequency of checks and alerts?
- A. Alerts Dashboard > Manage Checks > Schedule
- B. Health Dashboard > Manage Checks > Schedule
- C. Health Dashboard > Manage Crocks > Frequency
- D. Alerts Dashboard > Manage Checks > Frequency
Answer: B
Explanation:
According to the Nutanix Support & Insights web search result1, the administrator can change the frequency of checks and alerts for the System Non-Root Partition Usage in Prism Element by going to the Health Dashboard > Manage Checks > Schedule. The administrator can select the check name, such as disk_usage_check, and click on Edit Schedule. The administrator can then choose the desired frequency, such as every 15 minutes, every hour, or every day, and click on Save. This will change how often the check runs and alerts are generated.
NEW QUESTION # 77
An administrator needs to shut down an AHV cluster to relocate hardware. The administrator upgrades NCC and runs health checks.
Which steps should the administrator perform next?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements.
Answer:
Explanation:
Reference:
https://next.nutanix.com/how-it-works-22/scheduled-power-outage-relocating-cluster-hardware-if-you-need-to-shut-down-all-the-nodes-in-your-ahv-cluster-here-s-how-37326
NEW QUESTION # 78
A two-node ROBO cluster is configured with a witness VM.
What happens when Node A goes down?
- A. The cluster is unaffected and no administrator intervention is required.
- B. All operations and services on the Node B are shut down and go into a waiting state.
- C. The- cluster becomes unavailable and goes into read-only mode.
- D. Node B sends a leadership request to the Witness VM and goes into single-node mode.
Answer: D
Explanation:
According to the Nutanix Support & Insights, in a two-node ROBO cluster with a witness VM, if one node goes down, the other node sends a leadership request to the witness VM and goes into single-node mode. The cluster remains available and can tolerate another failure of either the witness VM or the network link.
NEW QUESTION # 79
An administrator needs to create a new Linux image and will to do the following as part of the VM deployment:
* Set the OS hostname
* Add custom users
* Add keys
* Run custom scripts
What package needs to be installed in the Linux image to facilitate this automation?
- A. CloudInit
- B. Sysprep
Answer: A
NEW QUESTION # 80
Refer to the exhibit.
An administrator is trying to implement the solution that is shown in the exhibit, but has been unsuccessful.
Based on the diagram, what is causing the issue?
- A. Active containers in both sites
- B. A remote Witness VM
- C. Network latency
- D. Unsupported hypervisor
Answer: C
Explanation:
The correct answer is C. Network latency.
The diagram shows a solution that uses synchronous replication between two remote protection domains, cluster site A and cluster site B. Synchronous replication is a feature that allows near-zero RPO (recovery point objective) by replicating data to the remote site before acknowledging writes to the local site. However, synchronous replication has some requirements and limitations that must be met for it to work properly. One of these requirements is that the network latency between the two sites must be less than or equal to 5 ms1. If the network latency is higher than 5 ms, the synchronous replication will fail and the protection policy will be suspended2.
Therefore, based on the diagram, the most likely cause of the issue is that the network latency between cluster site A and cluster site B is higher than 5 ms, which prevents the synchronous replication from working. To verify this, the administrator can use the "ncli cluster ping" command to measure the network latency between the two sites3. If the network latency is indeed higher than 5 ms, the administrator can either improve the network performance or switch to a different replication mode, such as near-synchronous or asynchronous.
NEW QUESTION # 81
How should an administrator configure a custom alert for a specific VM in Prism?
- A. Modify node settings to add the custom alert.
- B. Modify an existing alert to only alert on the specific VM.
- C. Modify VM settings to add the custom alert.
- D. Modify the alerts to add a new custom alert policy.
Answer: D
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details/?targetId=Prism-Central-Guide-Prism-v510:mul-alert-policies
NEW QUESTION # 82
An administrator needs to bring down a host in a Nutanix Cluster for maintenance reasons. The administrator puts the host in maintenance mode.
What should the administrator do to perform an orderly shutdown of the CVM?
- A. Enter Fever off Server - immediate from the IPMI console.
- B. Execute the cvm_shutdown -P new command from the CVM.
- C. Execute the cvm_shutdown -P now command from the host.
- D. Enter Fewer off Server-orderly Shutdown from the IPMI console.
Answer: B
Explanation:
According to the How to use the cvm_shutdown script web search result3, the cvm_shutdown script signals HA when shutting down the CVM (Controller VM) to forward the storage traffic to another healthy CVM. Instead of using sudo shutdown or sudo reboot commands, this script should be used to minimize I/O hits in user VMs running on the present hypervisor host. The cvm_shutdown -P now command will initiate the shutdown process on the CVM immediately. Therefore, if the administrator needs to perform an orderly shutdown of the CVM, they should execute this command from the CVM.
NEW QUESTION # 83
An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.
Which method should be used to anonymize the log data sent to Nutanix Support?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 84
Refer to the exhibit.
Which two initial cluster configuration tasks were missed during the deployment process? (Choose two.)
- A. Password policy changes
- B. BIOS password changes
- C. CVM password changes
- D. Host password changes
Answer: C,D
NEW QUESTION # 85
An administrator needs to ensure logs, alerts and information is consistent across clusters that are located in different countries.
Which service needs to be configured?
- A. DNS
- B. NTP
- C. SMTP
- D. SNMP
Answer: B
Explanation:
NTP service needs to be configured to ensure logs, alerts and information is consistent across clusters that are located in different countries. NTP stands for Network Time Protocol and it is used to synchronize the clocks of all the nodes in a cluster1. This helps to maintain accurate timestamps for logs, alerts and other information that are generated by Nutanix clusters1.
NEW QUESTION # 86
An administrator wants to receive an environment summary report when a host failure occurs.
Which action would address the administrator's need?
- A. Create a playbook
- B. Configure an alert policy
- C. Edit report schedule
- D. Enable App Discovery
Answer: B
Explanation:
An alert policy can be configured to send out an environment summary report when a host failure occurs. This can be done by creating a policy that triggers an alert whenever a host fails and then configuring the policy to send out a report that provides a summary of the environment in which the failure occurred. This will allow the administrator to quickly get a view of the environment after a failure occurs, allowing them to take the necessary steps to address the issue.
https://www.nutanix.com/support-services/training-certification/certifications/certification-details-nutanix-certifi
NEW QUESTION # 87
An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.
Which three steps must the administrator take to increase throughput to the host? (Choose three.)
- A. Remove any 1Gb interfaces still connected from the default bond.
- B. Connect the 10Gb interfaces to the physical switch.
- C. Change the bond mode to balance-slb or balance-tcp.
- D. Add a new switch to the network and connect 1Gb interfaces to it.
- E. Change the VLAN ID to a higher priority ID.
Answer: B,C,E
NEW QUESTION # 88
......
Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) v6.5 exam Practice Tests 2024 | Pass NCP-MCI-6.5 with confidence!: https://drive.google.com/open?id=17aQMds-VtjjuDdcaIzp1b1NAGSZot17g
Pass NCP-MCI-6.5 Tests Engine pdf - All Free Dumps: https://www.actualtestsquiz.com/NCP-MCI-6.5-test-torrent.html
