[Mar-2023] VMware 5V0-41.21 Test Engine PDF - All Free Dumps from ActualTestsQuiz
Get New 5V0-41.21 Certification – Valid Exam Dumps Questions
NEW QUESTION 30
Which two are true of the NSX Gateway Firewall? (Choose two.)
- A. Applied-To can be configured at Firewall Policy level.
- B. Security Groups can be used in Applied-To column.
- C. Firewall rules in System category cannot be edited.
- D. Firewall rules in Pre Rule category are applied to all gateways.
- E. NAT service can be configured in NSX Gateway Firewall policy.
Answer: A,D
NEW QUESTION 31
An administrator is creating the first distributed firewall rules for a company's salts department. What is the first object that must be created in the distributed firewall'
- A. firewall service
- B. firewall policy
- C. firewall folder
- D. firewall file
Answer: B
Explanation:
The first object that must be created in the distributed firewall is a firewall policy. A firewall policy is a set of rules that define what traffic is allowed or blocked on a given network. When creating a policy, the administrator must specify the source and destination address and port, as well as the type of traffic that is allowed or blocked. The policy will then be applied to the distributed firewall, allowing it to enforce the rules specified in the policy. Reference: [1] https://docs.vmware.com/en/VMware-NSX-T/3.0/vmware-nsx-t-30-administration-guide/GUID-4CAF59C8-13F3-4F3E-B53E-D8F1E03FBE7B.html [2] https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/techpaper/vmware-nsx-data-center-for-vsphere-distributed-firewall-deployment-guide.pdf
NEW QUESTION 32
What needs to be configured on each transport node prior to using NSX-T Data Center Distributed Firewall time-based rule publishing?
- A. NTP
- B. NAT
- C. PAT
- D. DNS
Answer: A
Explanation:
In order to use NSX-T Data Center Distributed Firewall time-based rule publishing, the NTP (Network Time Protocol) needs to be configured on each transport node. This ensures that the transport nodes have accurate time synchronization, which is required for time-based rule publishing. Additionally, DNS (Domain Name System) and PAT (Port Address Translation) may also need to be configured on each transport node, depending on the desired configuration. Reference: [1] https://docs.vmware.com/en/VMware-NSX-T/2.5/com.vmware.nsxt.admin.doc/GUID-E9F8D8AD-7AF1-4F09-B62C-6A17A6F39A6C.html [2] https://docs.vmware.com/en/VMware-NSX-T/2.4/com.vmware.nsxt.admin.doc/GUID-E9F8D8AD-7AF1-4F09-B62C-6A17A6F39A6C.html
NEW QUESTION 33
Which of the following are the local user accounts used to administer NSX-T Data Center?
- A. operator, admin, audit
- B. admin, super, read-only
- C. admin, audit, root
- D. operator, admin, root
Answer: A
Explanation:
For further reading, see the VMware NSX-T Data Center Administration Guide (https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.1/com.vmware.nsxt.admin.doc/GUID-4A4E9FBE-50B3-4F8F-B6C4-8527E7A08A67.html) for more information on user accounts and permissions in NSX-T Data Center.
NEW QUESTION 34
An organization wants to add security controlsfor contractor virtual desktops.Which statement Is true when configuring an NSX Identity firewall rule?
- A. User Identity can be used in the both the Source and the Destination sections of the firewall rule.
- B. User Identity can only be used in the Destination Section of the firewall rule.
- C. User Identity cannot be used in Source or Destination sections of the firewall rule.
- D. User Identity can only be used in the Source section of the firewall rule.
Answer: C
NEW QUESTION 35
An administrator needs to send FW connections logs to a remote server.
Which sequence of commands does the administrator need to apply on their ESXi Host?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: A
NEW QUESTION 36
A company's CTO has requested that all logging should be enabled for all NSX-T Data Center Distributed Firewall rules. What should be considered prior to executing this request?
- A. Large amounts of log information can fill up the vSphere Server database.
- B. Large amounts of log information will likely affect performance.
- C. Once logging is enabled for all rules it cannot be disabled afterwards.
- D. Logging can only be enabled for sections and not for single rules.
Answer: C
NEW QUESTION 37
A security administrator is verifying the health status of an NSX Service Instance.
Which two parameters must be functioning for the health status to show as Up? (Choose two.)
- A. VMs must have at least one vNIC.
- B. VMs must have virtual hardware version 9 or higher.
- C. VMs must be available on the host.
- D. VMs must not have existing endpoint protection rules.
- E. VMs must be powered on.
Answer: C,E
Explanation:
The health status of an NSX Service Instance is an indicator of the overall health and functionality of the service.
For an NSX Service Instance to show as Up, the following two parameters must be functioning:
1. VMs must be available on the host - The VMs that are associated with the service must be present on the host and able to communicate with the NSX Manager. If a VM is not available on the host, the service will not be able to function properly.
2. VMs must be powered on - The VMs that are associated with the service must be powered on and running. If a VM is not powered on, the service will not be able to function properly.
NEW QUESTION 38
An NSX administrator has been tasked with configuring a remote logging server (192.168.110.60) to send FW connections and packets logs to a remote logging server. The administrator is using this command syntax found in the NSX-T 3.1 documentation:
Which of the following commands does the administrator use to complete the configuration task?
- A. set logging-server 192.168.110.60 proto udp level info facility syslog message Id FIREWALL-PKTLOG
- B. set logging-server 192.168.110.60 proto udp level info facility syslog message Id FIREWALL-CONNECTION
- C. set logging-server 192.168.110.60 proto udp levelinfo facility syslog message Id system,fabric
- D. set logging-server 192.168.110.60 proto udp level info facility syslog message!-monitor. Firewall
Answer: A
NEW QUESTION 39
Which esxcli command lists the firewall configuration on ESXi hosts?
- A. esxcli network firewall ruleset list
- B. esxcli network firewall rules
- C. vsipioct1 getrules -f <filter-name>
- D. vsipioct1 getrules -filter <filter-name>
Answer: A
Explanation:
This command allows you to display the current firewall ruleset configuration on an ESXi host. It will show the ruleset names, whether they are enabled or disabled, and the services and ports that the ruleset applies to.
For example, you can use the command "esxcli network firewall ruleset list" to list all the firewall rulesets on the host.
You can also use the command "esxcli network firewall ruleset rule list -r <ruleset_name>" to display detailed information of the specific ruleset, where <ruleset_name> is the name of the ruleset you want to display.
It's important to note that you need to have access to the ESXi host's command-line interface (CLI) and have appropriate permissions to run this command.
https://docs.vmware.com/en/VMware-vSphere/6.7/com.vmware.vcli.ref.doc/esxcli_network_firewall_ruleset.html
NEW QUESTION 40
An NSX administrator has been tasked with configuring a remote logging server (192.168.110.60) to send FW connections and packets logs to a remote logging server. The administrator is using this command syntax found in the NSX-T 3.1 documentation:
Which of the following commands does the administrator use to complete the configuration task?
- A. set logging-server 192.168.110.60 proto udp level info facility syslog message Id FIREWALL-PKTLOG
- B. set logging-server 192.168.110.60 proto udp level info facility syslog message Id FIREWALL-CONNECTION
- C. set logging-server 192.168.110.60 proto udp level info facility syslog message Id system, fabric
- D. set logging-server 192.168.110.60 proto udp level info facility syslog message!- monitor. Firewall
Answer: A
Explanation:
The administrator is using the command syntax found in the NSX-T 3.1 documentation to configure a remote logging server to send firewall connections and packets logs. In order to complete the configuration task, the administrator needs to use the correct options for the command.
The options used in the command are:
logging-server: This option specifies the IP address or hostname of the remote logging server. In this case, the IP address of the remote logging server is 192.168.110.60.
proto: This option specifies the protocol to be used to send the logs to the remote server. In this case, the protocol used is UDP.
level: This option specifies the level of logging to be sent to the remote server. In this case, the level of logging is "info" facility: This option specifies the facility to be used for syslog messages. In this case, the facility used is "syslog" message Id: This option specifies the message Id that will be used for the logs. In this case, the message Id used is "FIREWALL-PKTLOG" Reference:
VMware NSX-T Data Center documentation https://docs.vmware.com/en/VMware-NSX-T-Data-Center/index.html VMware NSX-T Data Center Logging documentation https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.1/com.vmware.nsxt.logging.doc/GUID-2B9E9F8D-6CA9-4A1E-B7B1-8B8C7F0C2B2E.html
NEW QUESTION 41
Which two are the insertion points for North-South service insertion? (Choose two.)
- A. Uplink of tier-0 gateway
- B. Guest VM vNIC
- C. Uplink of tier-1 gateway
- D. Transport Node NIC
- E. Partner Service VM
Answer: A,B
Explanation:
The tier-0 gateway is the entry point of the NSX-T Data Center network, and it is where the North-South service insertion takes place. The uplink of the tier-0 gateway is the point of connection between the NSX-T Data Center network and the external network.
The guest VM vNIC is the interface card inside the guest virtual machine, which is used to connect the guest VM to the NSX-T Data Center network. North-South services can be inserted at this point as well.
NEW QUESTION 42
To which network operations does a user with the Security Engineer role have full access permission?
- A. Networking Load Balancing, Networking DNS, Networking Forwarding Policies
- B. Networking Forwarding Policies, Networking NAT, Networking VPN
- C. Networking DHCP, Networking NAT, Networking Segments
- D. Networking IP Address Pools, Networking NAT, Networking DHCP
Answer: C
NEW QUESTION 43
To which network operations does a user with the Security Engineer role have full access permission?
- A. Networking DHCP, Networking NAT, Networking Segments
- B. Networking Forwarding Policies, Networking NAT, Networking VPN
- C. Networking Load Balancing, Networking DNS, Networking Forwarding Policies
- D. Networking IP Address Pools, Networking NAT, Networking DHCP
Answer: B
NEW QUESTION 44
Refer to the exhibit.
An administrator is reviewing NSX Intelligence information as shown in the exhibit.
What does the red dashed line for the UDP:137 flow represent?
- A. Discovered communication
- B. Allowed communication
- C. Blocked communication
- D. Unprotected communication
Answer: C
NEW QUESTION 45
Which vCenter component is used by the NSX Manager to deploy the Partner Service VM on every host of a cluster configured for guest introspection?
- A. Update Manager (VUM)
- B. ESXi Agent Manager (EAM)
- C. Auto Deploy
- D. Component Manager
Answer: D
NEW QUESTION 46
Which esxcli command lists the firewall configuration on ESXi hosts?
- A. esxcli network firewall ruleset list
- B. esxcli network firewall rules
- C. vsipioct1 getrules -f <filter-name>
- D. vsipioct1getrules -filter <filter-name>
Answer: A
NEW QUESTION 47
A security administrator is required to protect East-West virtual machine traffic with the NSX Distributed Firewall. What must be completed with the virtual machine's vNIC before applying the rules?
- A. It is connected to a transport zone.
- B. It is connected to the underlay.
- C. It must be connected to a vSphere Standard Switch.
- D. It is connected to an NSX managed segment.
Answer: D
Explanation:
In order to apply the rules, the vNIC of the virtual machine must be connected to an NSX managed segment. The NSX managed segment is a logical representation of the virtual network, and all rules are applied at this level.
For more information on NSX Distributed Firewall and how to configure it, please refer to the NSX-T Data Center documentation: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsx-t-3.0-firewall/GUID-B6B835F2-B6F2-4468-8F8E-6F7B9B9D6E91.html
NEW QUESTION 48
Which two Guest OS drivers are required for the Identity Firewall to operate? (Choose two.)
- A. e1000e
- B. vmxnet3
- C. Guest Introspection
- D. NSX File Introspection
- E. NSX Network Introspection
Answer: C,E
Explanation:
The two Guest OS drivers that are required for the Identity Firewall to operate are NSX Network Introspection and Guest Introspection. NSX Network Introspection provides network-level visibility and control, while Guest Introspection provides kernel-level visibility and control. The other drivers listed, vmxnet3, NSX File Introspection, and e1000e, are not required for the Identity Firewall to operate.
NEW QUESTION 49
What needs to be configured on each transport node prior to using NSX-T Data Center Distributed Firewall time-based rule publishing?
- A. NTP
- B. NAT
- C. PAT
- D. DNS
Answer: A
NEW QUESTION 50
Information Security Management (ISM) describes a set of controls that organizations employ to protectwhich properties?
- A. configuration. Integrity, and availability
- B. confidentiality, interoperability, and availability
- C. confidentiality. Integrity, and accessibility
- D. confidentiality, integrity, and availability
Answer: A
NEW QUESTION 51
An NSX administrator is trying to find the dvfilter name of the sa-web-01 virtual machine to capture the sa-web-01 VM traffic. What could be a reason the sa-web-01 VM dvfilter name is missing from the command output?
- A. sa-web-01 VM has the no firewall rules configured.
- B. ESXi host has 5SH disabled.
- C. sa-web-01 is powered Off on ESXi host.
- D. ESXi host has the firewall turned off.
Answer: C
NEW QUESTION 52
......
VMware 5V0-41.21 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
100% Passing Guarantee - Brilliant 5V0-41.21 Exam Questions PDF: https://www.actualtestsquiz.com/5V0-41.21-test-torrent.html
5V0-41.21 Dumps 2023 - NewVMware Exam Questions: https://drive.google.com/open?id=18C67AEEJCVSR_2LNtI4_iRwthCWJy1jE
