[Nov 08, 2021] HPE6-A66 Sample with Accurate & Updated Questions
HPE6-A66 Exam Info and Free Practice Test | ActualTestsQuiz
Certification Path
The Aruba Certified Design Associate (ACDA) certification is valid for three years from date achieved. To recertify, you must pass one of the following exams before the expiration date:
- Pass the current exam on PearsonVUE
- If qualified, pass the Aruba Edge associate exam
- Pass the Aruba Certified Design Professional exam on PearsonVUE
Typical candidates for this course are IT Associate who want to learn about the Aruba products and the tools used to help design a network.
NEW QUESTION 26
A customer placed an order for an ArubaOS 5406R switch and plans to rack mount it in a wiring closet. The dimensions of the switch are 17.5 inches wide (44.45 cm), 6.9 inches high (17.5 cm), and 17.75 inches deep (45.1 cm). How many rack units should a customer plan for this switch?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 27
A network architect has created two sites in IRIS and defined network devices for each site. From which window would a network architect connect the two sites together?
- A. Start Page
- B. Catalog
- C. Site-1
- D. Topology
Answer: C
NEW QUESTION 28
Which AP mode allows an AP to operate autonomously?
- A. IAP
- B. OCAP
- C. AM
- D. RAP
Answer: B
NEW QUESTION 29
Which component uniquely defines the BSSID when implementing an employee SSID?
- A. Case-sensitive SSID name
- B. Case-insensitive SSID name
- C. Radio MAC address
- D. Wireless device MAC address
Answer: D
NEW QUESTION 30
A network architect is designing a new Wi-Fi solution for a customer The customer currently occupies a one-story building on a small campus. In one part of the building there is an auditorium, where the ceiling height and attenuation is different from the rest of the building. What should the network architect create in VisualRF to identify this difference when planning :ne APs?
- A. Define the appropriate properties in the Building View
- B. Spit the Building View into two Floorplan Views
- C. Define the appropriate properties in the Network View
- D. Create a Region in the Floorplan View
Answer: A
NEW QUESTION 31
A company is redesigning their wireless network and will be upgrading all devices to support the latest wireless standards. The company is not near any radar installations. In order to keep wireless NIC power levels as low as possible to reduce interference issues and to take advantage of radar frequency ranges, what IEEE standard should APs support?
- A. S02.11V
- B. 802.11 ax
- C. 802.11r
- D. S02.11h
Answer: B
NEW QUESTION 32
What is the main key for a network design to ensure users have a good experience running their applications'?
- A. Provision adequate bandwidth.
- B. Determine the number of users per location.
- C. Implement appropriate security controls
- D. Provide appropriate AP density.
Answer: D
NEW QUESTION 33
A company needs an upgrade of its access layer switches. The solution requires that devices connected to the access layer by authenticated and their traffic processed by the firewall features of the Aruba Mobility Controllers. Which solution should the company implement?
- A. PAPI mobility
- B. iPsec tunneling
- C. Dynamic segmentation
- D. GRE tunneling
Answer: B
NEW QUESTION 34
A company has two buildings on a campus that are approximately 700 feet (214 meters) apart with a clear line of site. No fiber exists between the buildings; however, there is a need for connecting the networks in the buildings together. The connection between the two buildings will need to support peak rates over 1 Gbps.
Which solution should the company choose that will meet their requirements as well as being cost-effective?
- A. Two outdoor AP 510s
- B. Multi-mode fiber between campus switches
- C. Two outdoor AP 367s
- D. Two outdoor AP 387s
Answer: C
NEW QUESTION 35
A network architect is redesigning a wireless network. The architect begins by analyzing the number of spatial streams supported by APs of various vendors as well as the wireless devices currently in the network, if the company wants to ensure that new wireless design, including user wireless devices, support Multi-User MIMO (MU-MIMO). which standard or standards must the wireless products support?
- A. Only 802.11ax,802.1lac, and 802.l1n
- B. Only 802.11ax,802.11ac, 802.11n, and 802.11a
- C. Only 802.11ax and 8011.ac
- D. Only 802.11ax
Answer: A
NEW QUESTION 36
A company has hired a network architect to replace an existing legacy wireless and wired network The building is one-story and contains four wiring closets Based on the information the network architect gathered from the company, one 48-port POE+ switch and three 48-port non-POE+ switches will be placed in each wiring closet. One stacking domain should be created for each wiring closet that supports 40 Gbps uplinks.
Which stacking solution should the architect implement for the floor that meets the requirements and is the most cost-effective'?
- A. VSX
- B. Backplane stacking
- C. Distributed trunking
- D. VSF
Answer: A
NEW QUESTION 37
A network architect has developed a design for a new Aruba Wi-Fi network that will include a hardware Mobility Master (MM) running the ArubaOS 8 4 operating system that will manage:
* Two clustered 7205 controllers with 300 campus APs
* Two clustered VMC-50 controllers with 75 remote APs
The architect plans on creating user roles, firewall policies, and wireless IPS policies on the controllers as well as implementing AirMatch. What would meet the license requirements for this scenario?
- A. LIC-MM-VA-500. LIC-MC-VA-50 (X2), LIC-AP <x375). PEF (x375). RFP (x375)
- B. LIC-MC-VA-50 (x1), LIC-AP (300), PEF (X300). RFP (x300)
- C. LIC-MM-VA-50, LIC-MC-VA-50 (X1), LIC-AP (X300), PEF <x300). RFP (x300)
- D. LIC-MC-VA-50 (X2), LIC-AP (375), PEF (X375), RFP (X375)
Answer: C
NEW QUESTION 38
A customer currently has sets of three Aruba 5406R switches deployed for an access layer in multiple wiring closets in a building They are clustered in a VSF domain The customer wants to set up Multiple Active Detection (MAD) for the OOBM port, as well as use this port for remote management access. To simplify the connectivity, the customer wants to connect these three switches' OOBM ports to a separate switch in the wiring closet for the OOBM connectivity.
Which would be the most cost-effective solution that would meet the customer's requirements?
- A. 0
- B. 2930M
- C. 2930F
- D. 5406R
Answer: A
NEW QUESTION 39
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)
- A. implementing adequate security measures to ensure PCI compliance
- B. determining the RF channel bandwidth consumed per Barcode scanner
- C. roaming between APs
- D. providing consistent performance on all available channels
- E. encountering RF interference by devices
Answer: A,D
NEW QUESTION 40
A customer is designing a new wired network. The customer requires 50 Gbps uplinks, VSF logical switching, and smart rate port support Which of the following switches would meet these requirements?
- A. 5400R series
- B. 8300 series
- C. 3810M series
- D. 6300 series
Answer: C
NEW QUESTION 41
A network architect is redesigning the access layer in a data center for a customer. The access layer requires fixed-port switches that support VSF and data center features like L2 VXLAN and REST-API Which switching solution should the network architect recommend?
- A. 3810M
- B. 0
- C. 1
- D. 2930F
Answer: D
NEW QUESTION 42
NewStellar has a main corporate campus in a business park with two adjacent buildings that are 150 feet apart (46 meters). This is an open campus with no obstructions between the two buildings Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters) The network architect has given one floor to analyze. Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply, and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters).
The company has determined that Wi-Fi coverage will not include the central area of each floor, which includes the washrooms, stairs, elevators and supply and network cabinets. Based on a capacity design, approximately how many APs should a network architect add to each floor to plan the design in VisuaiRF?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 43
A network architect plans to use two ArubaOS 5406 switches in a wiring closet configured in a VSF domain The VSF link requires a 40 GDps connection Which SFP+ transceiver solutions would meet this requirement?
- A. SFP
- B. QSFP28
- C. SmartRate
- D. QSFP+ LC
Answer: C
NEW QUESTION 44
Refer to the exhibit.
When planning the use of Cat7 cabling for a SmartRate connection between an ArubaOS AP and an ArubaOS switch, which sections should be considered when calculating distance?
- A. A + B
- B. A + B + C
- C. A + B + C + D
- D. A + C
Answer: C
NEW QUESTION 45
A network designer is documenting the number of physical sites for a customer that is within the scope of a redesign project. When determining the network purpose at each site, on what should the designer focus at each site? (Select two.)
- A. square footage
- B. number of buildings
- C. ceiling height
- D. number of users
- E. types of users and their devices
Answer: A,C
NEW QUESTION 46
......
How to Prepare For Aruba Certified Design Associate Exam
Preparation Guide for Aruba Certified Design Associate Exam
Introduction
This exam validates you have a fundamental knowledge of an Aruba network design and know the Aruba product lines to help you design the network with the assistance of a senior designer. Candidate should know how to read a customer request and extract the information needed for a wired or wireless network. Candidate should know how to use VRF and IRIS. HP HPE6-A66 practice exams and HP HPE6-A66 practice test will help you to understand and memorize the concepts and detailed answers and solutions.
Candidate should give this exam who want:
- To position yourself as a trusted team member who can contribute to the design of enterprise-wide Aruba campus wired and wireless networks.
- To advance your career as a certified professional
- To validate you understand the fundamentals of designing an Aruba Mobile First Platform
Pass HP HPE6-A66 Premium Files Test Engine pdf - Free Dumps Collection: https://www.actualtestsquiz.com/HPE6-A66-test-torrent.html
New 2021 Realistic HPE6-A66 Dumps Test Engine Exam Questions in here: https://drive.google.com/open?id=1oWT74e2Fs0ckmnQq7sgwTUgfGPzckxrp
