New 2021 Guaranteed Success with ActualTestsQuiz 300-610 Dumps Cisco PDF Questions
Exceptional Practice To Designing Cisco Data Center Infrastructure Pass the First Time
Who Should Aim at Cisco 300-610?
Cisco 300-610 is clearly not for everyone. It is for those willing to make big in the data center management industry. Thus, data center engineers as well as data center architects are the targeted job roles for this test.
Speaking of compulsory prerequisites, there are none. However, the word of wise says that it is good to have three to five years of practical experience in generating data center solutions. In this case, the certification journey will be a lot more simplified.
Which Skills Are Covered in the Exam?
This exam is an extensive one and tries to validate the test-takers’ skills in a broad range of topics. The prime focus is on data center infrastructure-related areas such as automation of networks, networking computing, and storage management. The details of the content are as follows:
1. Network Design
- Weightage allotted – 35%
This is the most widespread domain in Cisco 300-610 syllabus. It tries to educate the learner about evaluating options for Layer 2 and layer 3 connectivity. Topics like endpoint mobility, convergence, service insertion, IP mobility, and redundancy are covered here as well. In addition, the section requires candidates to be able to be knowledgeable about the details related to evaluating data center technologies like vPC, skills in assessing the available options for device & routing virtualization, such as VDC and VRF, and evaluating in-band and out-of-band options for management as well as work with redundancy.
NEW QUESTION 23
What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?
- A. SAN port channel
- B. LACP port channel
- C. E-Trunk
- D. vPC+
Answer: B
Explanation:
Section: Compute Design
NEW QUESTION 24
A network engineer designs a Cisco Nexus data center network for a client-server farm using a pair of Nexus 9000 Series. Switches In a vPC setup. Each server connects with two interfaces to both Nexus switches. The Nexus switches must always initiate the negotiation with the server. Which feature should be used in this design to ensure traffic is forwarded from the server to the data center network?
- A. LACP mode auto
- B. PAgP mode desirable
- C. LACP mode active
- D. PAgp mode auto
Answer: C
Explanation:
Servers cannot support PAgP
NEW QUESTION 25
Refer to the exhibit.
A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?
- A. Cisco UCS Manager creates a single fabric port channel.
- B. Cisco UCS Manager creates two separate fabric port channels.
- C. Each uplink that connects an IOM is configured as a discrete link.
- D. The port channel is disabled until an administrator enables it manually.
Answer: B
NEW QUESTION 26
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION 27
Which two features are provided by deploying an OOB management network in a Cisco Nexus data center?
(Choose two.)
- A. Layer 2 path for server traffic
- B. Layer 3 path for vPC keepalive packets
- C. Layer 2 path for a vPC peer link
- D. Layer 3 path for monitoring purposes
- E. Layer 3 path for server traffic
Answer: A,C
NEW QUESTION 28
A company owns a large-scale compute infrastructure that consists of over 1000 servers and virtual machines. The operational complexity continues to grow with additional policies and servers added to the environment. An infrastructure engineer is looking for an automation tool to reduce the operational complexity of configuring complex infrastructure. Because of the strict security requirements, the tool must be agentless, use the secure shell for transport, and be extendable using existing Python modules. Which tool meets these requirements?
- A. Saltstack
- B. Ansible
- C. NSO
- D. Puppet
Answer: B
NEW QUESTION 29
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION 30
An engineer is implementing a Cisco UCS environment. The system must aggregate all vNICs into a single policy and consistently enforce node disassociation across the cluster. Which two UCS policies meet these requirements? (Choose two.)
- A. LAN connectivity policy
- B. firmware policy
- C. scrub policy
- D. vNIC policy
- E. boot policy
Answer: A,D
NEW QUESTION 31
Which feature provides a sandbox to convert NX-OS CLI commands to REST-based scripts on Cisco Nexus
7700 Series Switches?
- A. Guest shell
- B. Bash shell
- C. NX-API
- D. Postman
Answer: C
NEW QUESTION 32
Drag and drop the configurations from the left onto the correct policies on the right.
Answer:
Explanation:
NEW QUESTION 33
Which feature provides a sandbox to convert NX-OS CLI commands to REST-based scripts on Cisco Nexus
7700 Series Switches?
- A. Guest shell
- B. Bash shell
- C. NX-API
- D. Postman
Answer: C
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/programmability/ guide/b_Cisco_Nexus_9000_Series_NX-OS_Programmability_Guide_7x/b_Cisco_Nexus_9000_Series_NX- OS_Programmability_Guide_7x_chapter_010010.html
NEW QUESTION 34
A company has several data centers with hundreds of Cisco UCS blade chassis. A network consultant plans to active Cisco Discovery Protocol to the servers to facilitate Layer 1 troubleshooting. For security reasons, the company wants to restrict the servers from sending different MAC addresses to the fabric interconnect after the MAC address from the first packet is learned. Which two policies be modified to support this design? (Choose two.)
- A. vNIC Policy
- B. Ethernet Adapter
- C. vNIC Template Policy
- D. Pin Group Policy
- E. Network Control Policy
Answer: C,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Network-Mgmt/4-0/b_UCSM_Network_Mgmt_Guide_4_0/b_UCSM_Network_Mgmt_Guide_4_0_chapter_01010.html
https://jeremywaldrop.wordpress.com/2010/05/03/how-to-enable-cdp-on-cisco-ucs-vnics/
NEW QUESTION 35
Refer to the exhibit.
What must be the default gateway of the servers in EPG Web?
- A. subnet address of BD2
- B. subnet address of L3Out
- C. NAT appliance
- D. subnet address of BD1
Answer: C
Explanation:
Section: Network Design
Explanation/Reference:
NEW QUESTION 36
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. Smart Zoning feature on the Cisco UCS Fabric Interconnects
- B. NPV feature on the Cisco MDS Series.
- C. end-host mode feature on the Cisco UCS Fabric Interconnects
- D. NPIV feature on the Cisco MDS Series
- E. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
Answer: B,D
NEW QUESTION 37
Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?
- A. NPIV mode
- B. FC end-host mode
- C. FC switching mode
- D. NPV mode
Answer: C
Explanation:
Explanation
Section: Storage Network Design
NEW QUESTION 38
Which two naming formats identify target or initiator iSCSI nodes? (Choose two.)
- A. EUI
- B. WWN
- C. WWPN
- D. OUI
- E. IQN
Answer: B,E
NEW QUESTION 39
Which approach splits a pair of clustered fabric interconnects into two standalone devices?
- A. Run the disable fips-mode command on each fabric interconnect.
- B. Unplug the Layer 1 and Layer 2 interfaces between the devices.
- C. Run the connect local-management command on each fabric interconnect.
- D. Erase the configuration of both fabric interconnects.
Answer: B
Explanation:
Section: Compute Design
NEW QUESTION 40
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?
- A. Ethernet and unified ports on the same port channel
- B. cross-connections with pinning
- C. VSS that has unified uplinks
- D. vPC that has unified uplinks
Answer: D
NEW QUESTION 41
An engineer is implementing management access to a Cisco Nexus platform. The customer requires a solution that provides isolation between the data and control planes. In addition to management that uses encryption and authentication. The customer will manage the device using both IPv4 and IPv6. Which two components should be used to meet these requirements (Choose two.)
- A. mgmt0 interface
- B. SSM protocol
- C. SNMP
- D. SVI interface
- E. Telnet protocol
Answer: A,C
Explanation:
We are talking about management only, so SSM is out. Since we need to separate between data and control plane, we should use mgmt0 interface, so SVI interface is out. Since we need to use encryption and authentication, this can be done in SNMPv3, while telnet does not support encryption, so telnet is out.
NEW QUESTION 42
Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?
- A. 8-Gbps links and 10-Gbps links use 64B/66B encoding.
- B. 8-Gbps links and 10-Gbps links use 8B/10B encoding.
- C. 8-Gbps links use 8B/10B encoding, and 10-Gbps links use 64B/66B encoding.
- D. 8-Gbps links use 64B/66B encoding, and 10-Gbps links use 8B/10B encoding.
Answer: C
NEW QUESTION 43
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION 44
Which address pool is used when a vHBA template is created?
- A. UUID
- B. IP
- C. MAC
- D. WWPN
Answer: D
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-1/ b_UCSM_GUI_Configuration_Guide_2_1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_011010.html
NEW QUESTION 45
......
300-610 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.actualtestsquiz.com/300-610-test-torrent.html
Best Quality Cisco 300-610 Exam Questions: https://drive.google.com/open?id=1l9qmbDzxsu6_lRCxaOi8BFH5mg_PkaF4
