Aruba Certified Design Expert (ACDX) HPE6-A80 Dumps Full Questions with Free PDF Questions to Pass
100% Updated HP HPE6-A80 Enterprise PDF Dumps
NEW QUESTION 24
For which scenario do Aruba CX 6300M Series switches meet the needs for an upgrade of the wired access layer while the Aruba CX 630QF Series switches do not?
- A. The Aruba CX6300M supports 10GBase-T connectivity with AP-515.
- B. The customer wants to utilize the Aruba AP-515 support for 002 3bz connectivity.
- C. The customer wants to utilize LACP on AP515 in VSF switch configuration.
- D. The Aruba CX 630DM support up to 75W PoE+ per port
Answer: D
NEW QUESTION 25
A customer has an existing; Aruba wireless solution to provide wireless access for employees. The solution Includes Aps, mobility controllers (MCs) at the network core, and a Mobility Master (MM} A customer would like to set up a separatelymanaged guest network and have the traffic go directly to the DMZ.
What should the architect suggest as the simplest solution that meets the requirements?
- A. Double the number of APs and controllers.
- B. Use MulitZone, and put a mobility controller in Itie DMZ.
- C. Add APs in a dedicated AP group to support only the guest network SSID.
- D. Have a dedicated mobility controller in the DMZ managed by the same MM
Answer: B
NEW QUESTION 26
Refer to the exhibit.
A hospital needs an upgrade to 802.1tax for its wireless network. The wireless network supports:
* wireless medical devices
* medical staff voice communicators
* laptops in nurse stations
* medical staff tablets
* visitor and patient personal devices.
All of these devices support both the 2 4GHz and 5GH2 band. Assuming about a max throughput on50 Mbps per AP; the hospital would like. The architect has used VisualRF to plan the AP placement on one of the floors, which the hospital expects will need to suppod about 800 win to deploy APS in stairwells between floors.
How well does the plan meet the requirements?
- A. The current AP placement meets coverage requirements, but does not meet capacity requirements.
- B. The current AP placement meets the customer requirements in terms of coverage and capacity.
- C. The current AP placement fails to account for the lead-lined wails that are common in patient and exam rooms.
- D. The current AP placement fails to provide adequate signal for the voice communicators in several areas
Answer: C
NEW QUESTION 27
Refer to the exhibit.
The exhibit shows the current AP deployment In a warehouse that stores frozen food goods:
* APs are mounted on the ceiling, which is 15 feet (4.6 m) high.
* Shelves are 12 feet (3.7 m) high and are typically fully stocked.
This customer indicates that their current wireless performance is inadequate.
What should the network architect include in the new solution to resolve this issue?
- A. APs deployed with directional antennas and a hybrid wall-mount, ceiling-mount design
- B. APS deployed on the ceiling in the same current locations, out with dual 5GHz radios
- C. APs deployed with directional antennas on the ceiling, due to the high 15-foot callings
- D. APs deployed on the ceiling in each aisle, due to the high absorption between aisles
Answer: D
NEW QUESTION 28
Refer to the exhibit.
A customer has the wined infrastructure shown in the exhibit. The customer is in the process of expanding their wireless services They will now add a new wireless solution, with mobility controllers (MCs) connected as shown. The new wireless solution will support a total of 450 APs and about 26,000 wireless devices. It must provide seamless roaming across the entire campus.
After the new deployment, both wired and wireless devices experience IP connectivity issues.
Which change to the existing infrastructure should the architect recommend to support all of the customer requirements?
- A. The core and aggregation switches should disable Virtual Switching Framework (VSF).
- B. The core switches should be replaced with switches that have larger ARP tables.
- C. The MCs should be moved to the aggregation layer, and more MCs added
- D. The wired VLANS should be combined into a single VLAN and n6 subnet
Answer: A
NEW QUESTION 29
A hospital needs a Getter way to track its inventory Including wireless medical devices that are moved around the site a lot.
Which solution meets these needs?
- A. Aruba beacons and Meridian
- B. Aruba beacons. APs. and AirWave
- C. Aruba asset tags, APs; and Meridian
- D. Aruba asset tags and beacons
Answer: A
NEW QUESTION 30
A company already has an Aruba wireless network The network currently consists of:
* oneMM-HW-1k
* two 7210 MCs in the network core
* two 721GMCsintheDMZ
* 200 AP-515S in Building 1 and Building 5
100 AP-515S each In Building 2r Building 3, and Building 4
The customer now wants to assess if it needs local Mobility controllers (MC) for any buildings:
- Building 1 is the main office building for the campus. It supports the highest number of APs. It connects to the network core without an aggregation layer.
* Building 2 is further away from the Building i. and no roaming is provided between it and the other buildings its access layer connects to the network cone with a pair of Aruba CX 6300M aggregation switches.
* Building 3 is further away from the other buildings, it connects to the network core without an aggregation layer.
The Guest SSID traffic should be tunnelled to the DMZ controllers
' Building 4 has its own local datacenter and Internet connection. The company would like it to be able to operate completely autonomously if its aggregation layer loses connectivity with the core.
* Building 5 is further away from the other buildings, it connects to the network core without an aggregation layer.
This building has been assigned to a partner that would like to manage a dedicated SS1D using the shared AP infrastructure.
In which two buildings should the network architect plan local mobility controllers (MCs)? (Select two)
- A. Building 3
- B. Building 1
- C. Building 5
- D. Building 4
- E. Building 2
Answer: A,B
NEW QUESTION 31
Refer to the exhibit.
The exhibit shows the current AP deployment in a school. This customer indicates that the current wireless performance is inadequate and w B02.11ax.
For the new' solution, what should the network architect recommend?
- A. APS deployed in similar locations, but with higher gain antennas
- B. APs deployed in rooms with a density-based design
- C. APs deployed in hallways with about twice the density
- D. APs deployed in similar locations, but with dual 5 GHz radios
Answer: C
NEW QUESTION 32
What is one customer requirement that can drive the need for a relatively dense AP deployment. In which ire coverage areas of at least three AP radios overlap?
- A. location tracking of wireless loT devices
- B. support for beacon management
- C. AP operation as hybrid AMs for IDS/WIPS
- D. the deployment of dual SGHz radio APs
Answer: B
NEW QUESTION 33
What is one benefit that Airwave provides to customers in the 8.x OS network?
- A. a central UI from which to manage all of the Mobility Controllers (MCs)
- B. in-depth analytics oT mobile device presence and APIs to make this data available to other applications
- C. profiling of wired and wireless client behavior and detection when the behavior varies from the baseline
- D. ability to monitor the status and operation of the complete network over time
Answer: C
NEW QUESTION 34
A customer has critical wired endpoints. However, each endpoint has a single Ethernet connection to the network. The customer wants redundancy in the switch access layer to minimize the chances that an endpoint will lose this connection The architect plans to deploy two Aruba CX 6405 switches in the closet.
Which plan provides the greatest redundancy for this scenario?
- A. The 6405 switches are in a VSX fabric, and each has a redundant management module but not a redundant power supply.
- B. The 6405 Switches are in a VSF fabric, so the individual switches do not need redundant components.
- C. The 6405 switches are not in a VSX fabric, and have redundant power supplies and redundant management modules.
- D. The 6405 switches are not in a vsF fabric, and have redundant power supplies but not redundant management modules.
Answer: A
NEW QUESTION 35
The architect plans to recommend an upgrade to Aruba CX switches
What is one requirement for the new solution that justifies this recommendation?
- A. the requirement to support secure IPsec tunneling at the aggregation layer
- B. the requirement to support tunneled-node at the access layer
- C. the requirement to support smart Rate at the access layer
- D. the requirement to support larger ARP tables at the aggregation layer
Answer: A
NEW QUESTION 36
A company has several remote sues that operate more or less autonomously. Each site has ns own local services and Internet connection However the company does have a main office with a few centralized resources that the company would like to make available to remote office employees over the Internet connection. Sites range in size and require between 10 and 20 APs.
The customer requires the most cost-effective solution that meets the requirements.
Which solution should the architect recommend for each remote site?
- A. an IAP cluster with an IPsec tunnel to a main office MC
- B. Campus APs (CAPs) with a local MC that has an SD-WAN license
- C. Remote APs (RAPs) with IPsec tunnels to a main office MC
- D. Campus APs (CAPS) with CPSec control channels to a main office MC
Answer: B
NEW QUESTION 37
A customer has multiple, very small branch sites that require just one or two APs each. The office has a local Internet connection, but all of the traffic is destined To the corporate data center, which has an Aruba wireless solution.
Which branch office solution best meets the customer needs?
- A. RAPs and no branch office controllers
- B. RAPs and 7005 branch office controllers with an. SD-WAN license
- C. IAPs and 7005 branch office controllers with an 3D-WAN license
- D. CAPS and 7005 branch office controllers
Answer: D
NEW QUESTION 38
Refer to exhibit.
A customer has a building that needs a switch upgrade. The customer would like at least 20Gbps for the uplink bandwidth out of each closet. The building wiring plan is shown in Exhibit i. The customer will not consider any cabling upgrades at this point. The current proposal is shown in Exhibit 2.
Which correction must the architect make to the proposal to meet the customer requirements?
- A. Add an aggregation layer, and connect wiring closet switches to the aggregation layer with SFP+- SR transceivers
- B. Change the SR transceivers tor each link between the wiring closet switches and me network core to LRM transceivers
- C. Add an aggregation layer, and connect wiring closet switches to the aggregation layer on Smart Rate pons.
- D. Add a mode conditioning cable for each link between the wiring closet switches and the network core.
Answer: D
NEW QUESTION 39
Refer to the exhibit.
A company needs a new wireless solution for its multi-site network. All branch sites must connect to the main site through secure tunnels over the Internet. The customer requires full redundancy for the Mobility Controllers (MC). Including stateful faiEoverand seamless roaming for the main site.
The architect plans to propose:
- 500 RAPS
- 100 APs at the main campus
- two 7205 MCs
- two 7210 MCS
- one MM appliance
The exhibit snows the existing wired network at the main site, which has a single building with two large floors.
Following the best-practices on design, performance and security, where should the architect plan to connect the MCs?
{Potential locations are numbered in the exhibit.)
- A. two 7205 MCs at 2; two 7210 MCs at 1
- B. two 7205 MCS at 1; two 7210 MCS at 2
- C. one 7205 MC at 3 and one at 4; two 7210 MCs at 1
- D. all of the MCs at 2
Answer: D
NEW QUESTION 40
A network architect plans to propose a virtual Mobility Master (VMM) tor a new solution. The solution will support up to 4.800 wireless client devices and include:
* two Virtual Mobility controllers (VMCs) in a cluster
* 180 APs
Which licenses should the architect propose?
- A. 1 MM-VA-500; 1 MC-VA-250; 180 Enterprise licenses
- B. 1 MM-VA-1K; 2 MC-VA-25Q; one Enterprise license
- C. 1 MM-VA-IK:I MC-VA-250; 180 Enterprise licenses
- D. 1 MM-VA-500; 2 MC-VA-250; 540 Enterprise licenses
Answer: C
NEW QUESTION 41
Compare the scenarios below. For which scenario do AP-575S meet the needs?
- A. The customer needs APs for an Indoor nigh density environment In which tne customer prefers dual 5GHz operation.
- B. The customer needs to mount APs in an outdoor area, but that area only has fiber cable available,
- C. The customer needs APs for an indoor stadium that requires overhead coverage and directional antennas.
- D. The customer needs APS mounted to a concrete building exterior to provide coverage in a 90 foot (27m) radius from the building.
Answer: B
NEW QUESTION 42
A mall requires a wireless network upgrade to 802 -Max The company that owns the mall wants to provide the APs for the entire mall. However, several of the larger national chain retailers with spaces in the mall want to offer wireless services with their own SSIDs.
These individual retailers also have their own wireless guest services and wireless client devices They have their own corporate infrastructure and want to handle all of this wireless traffic on their own, including terminating the traffic on their own controllers. The mall requires redundancy for its services, out the retailers do not.
Which plan for mobility controllers (MCs) and mobility master (MW) meets the needs of this scenario?
- A. two MCs for the mall company and one MC for each retailer with its own SSIDs, all controlled by the same pair of MMs
- B. two MCs for the mall company and for all of the retailers, both controlled by the same pair of MMs
- C. a pair of MMs for the mall company, but not MCs: MMs control one MC for each retailer with its own SSIDs
- D. two MCs for the mail company controlled by a pair of MMS; one standalone MC for each retailer with its own SSIDS
Answer: C
NEW QUESTION 43
A retailer currently has two redundant ClearPass C2000 0L36O Gen9 hardware appliances and two perpetual 1K Access licenses. The customer uses ClearPass to authenticate employee wireless devices and other corporate wireless devices. ClearPass togs indicate that, peak license usage is currently 1900.
The customer now wants to add a guest access solution. Guests will connect to an open SSiD and be redirected to a portal which they can use to self-register and log in. The customer anticipates that up to f 550 guest devices will connect at the same time.
The customer requires the most cost-effective solution that will meet the requirements. What should the network architect recommend for this solution?
- A. 1K + 500 Access licenses; Two 1K Onboard licenses
- B. 1K + 500 Access licenses
- C. Two 1K Guest licenses
- D. IK + 500 Access licenses: IK + 500 Guest licenses
Answer: C
NEW QUESTION 44
......
Use Valid Exam HPE6-A80 by ActualTestsQuiz Books For Free Website: https://www.actualtestsquiz.com/HPE6-A80-test-torrent.html
Free Aruba Certified Design Expert (ACDX) HPE6-A80 Official Cert Guide PDF Download: https://drive.google.com/open?id=1N8LeEimrFtA1sClsd_kfH23vsxmF22Ta
