SolarWinds SCP-NPM Questions and Answers Guarantee you Oass the Test Easily
Share Latest SCP-NPM DUMP with 77 Questions and Answers
NEW QUESTION # 22
Your team member cannot see any reports in the Orion Console. What can cause this issue?
- A. The SQL server is on a different system than the SolarWinds server
- B. The reports are configured with more than one limitation category
- C. The Report Writer is not installed
- D. The No Reports limitation is applied to the user account
Answer: D
NEW QUESTION # 23
Your network has critical devices on the opposite side of a WAN link from you SolarWinds server. You do not want alerts about the devices if the router (name = "target") that connects your SolarWinds server to the remote site is down. How do you configure Alert Suppression?
- A. Suppress alert when any of the following apply: Node Name is equal to "target" / Interface Status is equal to "Down"
- B. Suppress alert when all of the following apply: Node Name is equal to "target" / Interface Status is equal to "Warning"
- C. Suppress alert when all of the following apply: Node Name is equal to "target" / Node Status is equal ta "Down"
- D. Suppress alert when any of the following apply: Node Name is equal to "target" / Node Status is equal to "Warning"
Answer: A
NEW QUESTION # 24
What is required of your nodes to detect duplex mismatches? (Choose all that apply.)
- A. Duplex of both devices must be identified as full or half
- B. Unify the duplex mode configuration on neighboring interfaces
- C. The nodes must support topology and be interconnected
- D. Ensure corresponding values for each interface are different
Answer: A,D
NEW QUESTION # 25
You're troubleshooting a complex network issue and need to build a comparison of several metrics across multiple devices and SolarWinds products to identify the problem. What feature can you use?
- A. Network Insight
- B. PerfStack
- C. AppStack
- D. NetPath
Answer: B
NEW QUESTION # 26
Which is the best way to monitor an SNMP metric that NPM is not monitoring out-of-the-box?
- A. Update the SolarWinds MIB database
- B. Create a custom poller
- C. Enable CLI polling
- D. Node Management utility
Answer: B
NEW QUESTION # 27
You want to create an Orion Map that shows the connections between your on-site devices and your servers in the Cloud. You can see the connections between all of the devices on site, but do not have visibility to the connections to your cloud servers.
How do you resolve this?
- A. Switch to SNMP polling for all devices to show the connections between on site and cloud resources
- B. Increase the polling intervals between Orion and the cloud servers
- C. Manually configure connections between onsite and cloud resources in Orion Maps
- D. Open additional firewall ports between the cloud servers and the on-site devices
Answer: A
NEW QUESTION # 28
Your network includes the headquarters and three remote sites. Users from remote site A complain they do not have access to the company's accounting server. Users from remote site B and C have access to the accounting server. How can you find the source of the issue?
- A. Use NetPath to see if there are problem areas between remote site A and remote sites B and C
- B. Verify that the accounting servers' CPU utilization are not abnormally high
- C. Verify that the accounting servers are up
- D. Use NetPath to see if there are problem areas between remote site A and the headquarters
Answer: D
NEW QUESTION # 29
How do you prevent alerts when an interface is down, without influencing the status of the parent node?
- A. Add a dependency with the interface as the parent object, and the interface as the child
- B. Add a dependency with the node as the parent object, and the interface as the child
- C. Select Unmanage Now in the parent node's Maintenance Mode drop-down
- D. Select Display Interface as Unplugged Rather Than Down in the Node Management view
Answer: B
NEW QUESTION # 30
You need to build an Orion Map to show the relationships and connections between your Cloud servers and on premise infrastructure. You add the nodes but discover that the Orion Platform is not automatically mapping the connection between your cloud server and on premise router. You have verified that layer 2 and layer 3 topologies are being polled on the devices. How do you resolve this issue?
- A. You need to open the topology ports in your firewall between the on premise node and the cloud node
- B. You cannot monitor the connection between on premise and off premise devices
- C. You need to turn off layer 2 and layer 3 topology polling for cloud monitoring
- D. You need to configure a custom connection between the cloud node and the on premise node
Answer: D
NEW QUESTION # 31
You can apply Universal Device Pollers to which object types? (Choose all that apply.)
- A. Applications
- B. Nodes
- C. Volumes
- D. Interfaces
Answer: B,C,D
NEW QUESTION # 32
How many days of data must your database contain in order to see Capacity Forecast Charts in NPM?
- A. 7 Days
- B. 3 Days
- C. 1 Day
- D. 5 Days
Answer: A
NEW QUESTION # 33
What is the most time-efficient way to create a report in NPM that shows the top 50 interfaces by percent utilization?
- A. Create a new advanced SQL query report
- B. Run the default top 25 interfaces by percent utilization report for different timeframes
- C. Create an interface report and use a filter to restrict to the top 50
- D. Edit the default top 25 interfaces by percent utilization report and update to the top 50
Answer: C
NEW QUESTION # 34
You add several nodes for monitoring and can see detailed information on those nodes in the Orion Web Console. However, when you look at the nodes in Orion Maps, the connections between the nodes are not showing. What is a likely reason?
- A. A firewall is blocking polling between the nodes and the Orion server
- B. You did not enable Layer 2 and Layer 3 topology polling on those nodes
- C. You did not enable SNMP polling
- D. You did not add the node topology OIDs to the MIB database
Answer: B
NEW QUESTION # 35
You created a Universal Device Poller. You want to create an alert based on this custom poller. When you create the alert, you select "I want to alert on: Custom Poller." How would you identify the custom poller within the trigger condition?
- A. Using the SNMP get type
- B. Using the Unique Name of your UnDP
- C. Using the enabled status
- D. Using the MIB used in your UnDP
Answer: B
NEW QUESTION # 36
How many agents does NPM require for Quality of Experience, NetPath, and system monitoring on the same Windows server?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 37
Users report that NPM performance is slow when managing devices through the Orion Web Console. You verify the SNMP trapping is responsible for the poor performance. How do you resolve this issue?
- A. Reduce the number of days SNMP messages are kept in the SolarWinds Trap Viewer
- B. Add an Additional Web Server to handle the load of users accessing the NPM Orion Web Console
- C. Add the devices as managed nodes to cut down on the trap messages received
- D. Point the devices to a trap manager and filter unwanted messages before forwarding remaining traps to the Orion Platform
Answer: D
NEW QUESTION # 38
You added a device for NPM to monitor. You can see CPU and memory statistics, but want to see a statistic that NPM does not support out of the box. Which features can you use to collect the statistics you want from the device? (Choose all that apply.)
- A. Application monitor templates
- B. Device templates
- C. Universal Device Pollers (UnDP)
- D. Manage Pollers in Device Studio
Answer: A,C,D
NEW QUESTION # 39
You run a Network Discovery and discover devices that you do not want to monitor. What feature can you use to exclude those devices from future discoveries?
- A. Discovery White List
- B. Discovery Trash List
- C. Discovery Ignore List
- D. Discovery Watch List
Answer: C
NEW QUESTION # 40
......
Dumps for Free SCP-NPM Practice Exam Questions: https://www.actualtestsquiz.com/SCP-NPM-test-torrent.html
PDF Dumps 2023 Exam Questions with Practice Test: https://drive.google.com/open?id=1CFY5Mgy1w1j29noyDfNDZj0fj8XEDazV
