The Most Efficient NS0-194 Pdf Dumps For Assured Success [2024]
We offers you the latest free online NS0-194 dumps to practice
Network Appliance NS0-194: NetApp Certified Support Engineer exam consists of various topics, including storage system architecture, hardware and software components, and data protection. Candidates will also be tested on their proficiency in network protocols, such as NFS, CIFS, and iSCSI, as well as their ability to analyze performance issues and configure NetApp storage systems for optimal performance.
NEW QUESTION # 88
A storage administrator explains that when he enabled a virus scan on a clustered Data ONTAP 8.3.2 SVM "svm1" at 8:00 a.m. BST this morning, all CIFS share user access was impacted and customers reported receiving "access denied" errors. After the storage administrator disabled the virus scan on "svm1", user access was restored 30 minutes later.
Now the storage administrator wants to know the root cause of the problem. When you begin collecting event management system (EMS) logs, you discover the errors shown in the exhibit.
What was the root cause of the outage after the virus scan was enabled on "svm1"?
- A. The logged-in user (domain\\vscan_admin1) attempting to connect to the privileged ONTAP_ADMIN$ share is not found in the list of allowed users.
- B. The IP address (172.16.16.74) attempting to connect to the privileged ONTAP_ADMIN$ share is not found in the list of allowed IP addresses.
- C. Virus scan is enabled on the wrong SVM.
- D. Symantec Protection Engine is not one of our supported virus scan vendors.
Answer: C
NEW QUESTION # 89
Your Windows clients were able to access your CIFS SVM yesterday. Today they are no longer able to access the CIFS SVM on your NetApp cluster. Your IT security team just pushed out a new group policy to enhance security.
In this scenario, which statement is true?
- A. Your CIFS SVM is configured for NFSv3 access.
- B. Your CIFS SVM is configured for the wrong domain.
- C. Your CIFS SVM is not using DNS.
- D. Your CIFS SVM is configured to use SMBv1 and SMBv2.
Answer: C
NEW QUESTION # 90
Microsoft SQL Server is being hosted from a Microsoft Hyper-V cluster and is mounting a LUN from NetApp storage that contains its working databases.
In this scenario, which product would be used to ensure that consistent Snapshot copies of the database are obtained?
- A. SnapManager for Virtual Infrastructure
- B. SnapManager For SQL server
- C. SnapManager for Hyper-V
- D. SnapManager for MS Exchange
Answer: B
NEW QUESTION # 91
Snap Drive for Windows has been installed and configured on a VMware virtual machine. The virtual machine has been configured with raw device mappings (RDMs) that are mapped to LUNs on a NetApp storage controller.
The RDMs can be seen as connected disks in Windows Disk Management.
However, Snap Drive is not enumerating the RDMs.
Which action will solve the problem in this scenario?
- A. Virtual Center or ESX servor logon settings must bo enabled and configured.
- B. Snap Drive must have the preferred storage IP addresses configured.
- C. Snap Drive and Virtual Storage Console (VSC) integration must be configured.
- D. Snap Drive must be installed on tin* VhtualCenter server.
Answer: C
NEW QUESTION # 92
Which database must be installed for deployments of OnCommand Unified Manager 6.x and OnCommand Performance Manager for Linux installations?
- A. Sybase
- B. Oracle
- C. MySQL
- D. MS SQL Server
Answer: C
NEW QUESTION # 93
You are preparing to implement a storage virtual machine (SVM) in a SAN configuration. You need to eliminate single points of failure and enable the system to survive component failures.
According to NetApp, what is the recommended minimum number of paths per LUN connecting to each node being used by an SVM in a cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 94
A customer asks what is the correct way to configure an ONTAP system for multi-tenancy. The customer wants to serve data and also protect data using SnapMirror from tenant A using network A and from tenant B using network B.
In this scenario, which statement is correct?
- A. The customer must use different VLANs for the two tenants.
- B. The customer must set up two different IPspaces for the two tenants.
- C. Each node can only communicate with tenant A or tenant B, but not with both at the same time.
- D. This setup can only work if tenant A and tenant B use a shared network infrastructure.
Answer: D
NEW QUESTION # 95
You are planning to move to a newer clustered Data ONTAP version.
Which two resources should you review prior to the move? (Choose two.)
- A. Upgrade Advisor
- B. System Administration Guide for Cluster Administrators
- C. Software Setup Guide
- D. IMT
Answer: A,D
NEW QUESTION # 96
Your customer is concerned about SnapMirror transfers consuming too much network bandwidth. In this situation, which two SnapMirror features would help the customer? (Choose two.)
- A. fan-out
- B. throttling
- C. fan-in
- D. network compression
Answer: B,D
NEW QUESTION # 97
Referring to the exhibit.
The customer configured an SVM called "NewSVM" for NFS, configured the volume, "vol_nfs", mounted at "/vol_nfs", and set up NFSv3 as shown in the exhibit.
However, if they try to mount from the client with IP address 192.168.10.10, they receive a "permission denied" error. In this scenario, which action will solve the error condition?
- A. Configure the default route for NewSVM correctly.
- B. Stop and start NewSVM.
- C. Add a rule to the default export policy to Include the -clientmatch 192.168.10.0/24 parameter.
- D. Associate a correct export policy to the root volume(/) of NewSVM.
Answer: B
NEW QUESTION # 98
You receive an AutoSupport notification because of the error shown below. "HA GROUP ERROR: DISK/SHELF COUNT MISMATCH ERROR."
In this scenario, which two steps would you take to solve the problem? (Choose two.)
- A. You should perform a failover and a giveback to clear the error.
- B. You should examine the IOM modules for error lights and reseat.
- C. You should review the /etc/messages log.
- D. You should power cycle all the disk shelves to clear the error.
Answer: C,D
NEW QUESTION # 99
For testing purposes, your customer decides to use FC on a single-node ONTAP cluster. There is only one host that the customer expects to use. High availability is not a concern for this test. The customer connects the host directly to the ONTAP node. The LUN is set up, and the igroup is configured. When the customer tries to attach to the LUN from the host, the LUN is not seen by the host.
Which statement is correct in this scenario?
- A. NPIV must be enabled on the host before trying to attach to the LUN.
- B. An FC switch must be used with ONTAP.
- C. Multipathing must be used and connected to another FC path.
- D. NPV must be enabled on the host before trying to attach to the LUN.
Answer: D
NEW QUESTION # 100
A FAS system that is backed by 7200 RPM drives is experiencing extremely latent writes and slow but less latent reads.
Referring to the exhibit, what are two reasons for this result? (Choose two.)
- A. The controller is in back-to-back consistency points.
- B. Indirect I/O is causing most of the latency.
- C. NVRAM is too small for the controller.
- D. The disks are latent.
Answer: A,D
NEW QUESTION # 101
You just replaced a controller in a single-node cluster. When the controller boots, it panics and reboots in a continuous loop.
In this scenario, which two actions are required to solve this problem? (Choose two.)
- A. Use the Special Boot Menu option to clean the configuration and initialize all disks.
- B. Use the Special Boot Menu option to boot into maintenance mode.
- C. Reassign disk ownership from the old controller to the new controller.
- D. Use the Special Boot Menu option to configure ADP.
Answer: B,C
NEW QUESTION # 102
You have a 6-node cluster with six identical controllers. You are upgrading from clustered Data ONTAP 8.3.1 to clustered Data ONTAP 8.3.2.
From the Upgrade Advisor, you downloaded the upgrade plan. In this scenario, which two steps are part of that plan? (Choose two.)
- A. Perform LIF migration of all SAN LIFs before takeover.
- B. Verify system health.
- C. Migrate all aggregates to the HA pair that was most recently upgraded.
- D. Set a new image as the default image.
Answer: A,D
NEW QUESTION # 103
What are two reasons to use HTTPS as the transport method for AutoSupport delivery for Active IQ? (Choose two.)
- A. AutoSupport OnDemand (AOD) is supported.
- B. HTTPS is encrypted.
- C. Only HTTPS transfers are compressed.
- D. HTTPS does not use a standard port.
Answer: A,B
NEW QUESTION # 104
A customer receives the message shown below in their EMS logs.
Tue Jun 27 18:34:18 CEST
[netapp-ct1: cp_worker: wafl.cp.toolong:error]: Aggregate AG1_NTAP_PROD experienced a long CP.
Tue Jun 27 18:37:10 CEST
Which two data sources do you use to explain this message? (Choose two.)
- A. Active IQ Unified Manager
- B. ONTAP System Manager
- C. mgwd.log
- D. Performance Archive
Answer: B,D
NEW QUESTION # 105
Click the Exhibit button at the right.
When using ONTAP, the customer uses a mirror-SnapVault cascade, as shown in the exhibit. The Snapshot copies successfully transfer from the primary volume on storage system A to the SnapMirror destination on storage system B.
However, not all SnapMirror Snapshot copies are being transferred from storage system B to the XDP destination on storage system C.
In this scenario, which Snapshot copies will transfer successfully?
- A. all manually initiated SnapMirror transfers
- B. transfers initiated by a SnapMirror schedule
- C. any Snapshot copy created within the last 24 hours
- D. only Snapshot copies with the SnapMirror label called sm_created
Answer: D
NEW QUESTION # 106
Which statement is true about a switchless cluster?
- A. Converting a switchless cluster to a switched cluster is disruptive.
- B. A switchless cluster can only be used for a system with two controllers in one chassis configuration.
- C. In a switchless cluster, the network options switchless-cluster -enabled parameter must be set to true.
- D. A switchless cluster can support up to one node per cluster port.
Answer: C
NEW QUESTION # 107
In clustered Data ONTAP, you just configured a new storage virtual machine (SVM) that SnapCenter Plug-in for Microsoft Windows needs to access to create Snapshot copies when running SnapManager for Microsoft Exchange Server.
However, when attempting to configure the SnapDrive transport protocol settings to communicate with the SVM, you receive the error shown in the exhibit.
Which three parameters are required in this scenario? (Choose three.)
- A. The data protocol is set to "none."
- B. The SVM name is the same as the CIFS server name when CIFS is enabled.
- C. The SVM management LIF firewall policy is set to management.
- D. The role is set to cluster.
- E. The SVM name resolves to the management LIF's IP address.
Answer: C,E
NEW QUESTION # 108
A customer is concerned because an external tool is reporting 100% CPU utilization on node "netapp-01". There are no reports of latency or throughput issues. You execute some commands and obtain the output shown in the exhibit.
Based on the output, you see no problems. In this scenario, what are two reasons that support your position? (Choose two.)
- A. the consistency points are type T
- B. average CPU utilization is below 50%
- C. the amount of read network throughput is below 200 MB/sec
- D. the low number of CIFS operations
Answer: B,D
NEW QUESTION # 109
Which three techniques are used in ONTAP to improve storage efficiencies? (Choose three.)
- A. thin provisioning
- B. ADP
- C. compression
- D. encryption
- E. compaction
Answer: A,C,E
NEW QUESTION # 110
You receive the AutoSupport message, "CONTROLLER TAKEOVER COMPLETE PANIC" from a FAS3250 controller. You suspect a hardware issue. A core file was written to disk.
In this scenario, which two actions would you perform to obtain more information? (Choose two.)
- A. You collect the core file and upload it to NetApp Global Services (NGS) for analysis.
- B. You turn on "hardware debugging mode" using System Manager.
- C. You boot the failed controller to maintenance mode and execute the sldiag command.
- D. You boot the failed controller, carry out a giveback, and wait until the issue reoccurs.
Answer: A,B
NEW QUESTION # 111
......
The NS0-194 certification exam is a highly sought-after certification by IT professionals who want to specialize in the field of storage and data management. NetApp Certified Support Engineer certification exam provides candidates with the skills and knowledge required to manage and troubleshoot NetApp storage systems. The NS0-194 certification exam is also an excellent way for IT professionals to demonstrate their expertise and commitment to their profession.
Network Appliance NS0-194 (NetApp Certified Support Engineer) certification exam is a professional-level certification that is designed for IT professionals who work in large-scale environments with NetApp technologies. NetApp Certified Support Engineer certification focuses on validating the skills and knowledge required to support and troubleshoot NetApp products.
NS0-194 PDF 100% Cover Real Exam Questions: https://www.actualtestsquiz.com/NS0-194-test-torrent.html
