Real Exam Questions JN0-334 Dumps Exam Questions in here [Nov-2022]
Get Latest Nov-2022 Conduct effective penetration tests using JN0-334
Conclusion
There’s never a perfect time to make a career-changing decision. But this is certainly the best time to get ahead in your career using a reputable certification that will validate your competency in managing Juniper Networking solutions and products. It is a big decision that starts with choosing the right designation, preparing for the required exam, and passing it. And that exam today is the Juniper JN0-334, which covers all the aspects you need to build a fruitful career. This post has attempted to cover everything you need to know to clear JN0-334 exam. So, the remaining percentage is solely a personal decision. Make it happen today!
NEW QUESTION 21
Exhibit.
The output shown in the exhibit is displayed in which format?
- A. binary
- B. syslog
- C. sd-syslog
- D. OWELF
Answer: A
NEW QUESTION 22
Click the Exhibit button.
You have implemented SSL proxy client protection. After implementing this feature, your users are complaining about the warning message shown in the exhibit.
Which action must you perform to eliminate the warning message?
- A. Regenerate the SRX self-signed CA certificate and include the correct organization name.
- B. Import the SRX self-signed CA certificate into the client Web browsers.
- C. Import the SRX self-signed CA certificate into the SRX certificate public store.
- D. Configure the SRX Series device as a trusted site in the client Web browsers.
Answer: B
NEW QUESTION 23
You must block the lateral spread of Remote Administration Tools (RATs) that use SMB to propagate within the network, using the JATP solution.
Which action would accomplish this task?
- A. Configure whitelist rules
- B. Configure the SAML settings.
https://www.juniper.net/documentation/en_US/release-independent/jatp/information-products/pathway-pages/jatp-operators-guide.pdf pg 43 YARA Rules and Lateral Detection Remote Administration Tools (RATs) can be detected using YARA rules. By adding the ability to push YARA rules to Juniper ATP Appliance devices, Juniper ATP Appliance can detect the lateral spread of Remote Administration Tools (RATs) within a network. - C. Configure YARA rules.
- D. Configure a new anti-virus configuration rule.
Answer: C
NEW QUESTION 24
In an Active/Active chassis cluster deployment which chassis cluster component is responsible for RGO traffic?
- A. the secondary node
- B. the backup routing engine of the primary node
- C. the primary node
- D. the master routing engine of the secondary node
Answer: B
NEW QUESTION 25
Which interface is used exclusively to forward Ethernet-switching traffic between two chassis cluster nodes?
- A. swfab0
- B. fxp0
- C. me0
- D. fab0
Answer: A
NEW QUESTION 26
Your manager asks you to find employees that are watching YouTube dunng office hours Which AppSecure component would you configure to accomplish this task?
- A. AppFW
- B. AppTrack
- C. AppQoS
- D. AppQoE
Answer: C
NEW QUESTION 27
A routing change occurs on an SRX Series device that involves choosing a new egress interface.
In this scenario, which statement is true for all affected current sessions?
- A. The current sessions are torn down and go through first path processing based on the new route.
- B. The current session are torn dowm only if the policy-rematch option has been enabled.
- C. The current sessions do not change.
- D. The current sessions might change based on the corresponding security policy.
Answer: A
NEW QUESTION 28
The AppQoE module of AppSecure provides which function?
- A. The AppQoE module provides routing, based on network conditions
- B. The AppQoE module prioritizes important applications.
- C. The AppQoE module blocks access to risky applications
- D. The AppQoE module provides application-based routing
Answer: D
NEW QUESTION 29
Click the Exhibit button.
You have configured the scheduler shown in the exhibit to prevent users from accessing certain websites from 1:00 PM to 3:00 PM Monday through Friday. This policy will remain in place until further notice. When testing the policy, you determine that the websites are still accessible during the restricted times.
In this scenario, which two actions should you perform to solve the problem? (Choose two.)
- A. Use the start-date parameter to specify the date for each Monday and use the stop-date parameter to specify the date for each Friday.
- B. Use the PM parameter when specifying the time in the schedule.
- C. Add the saturday exclude parameter and the sunday exclude parameter to ensure weekends are excluded from the schedule.
- D. Use the 13:00 parameter and the 15:00 parameter when specifying the time.
Answer: C,D
NEW QUESTION 30
Screens help prevent which three attack types? (Choose three.)
- A. ICMP fragmentation
- B. port scan
- C. NTP amplification
- D. SQL injection
- E. SYN flood
Answer: A,B,E
NEW QUESTION 31
The DNS ALG performs which three functions? (Choose three )
- A. The DNS ALG modifies the DNS payload in NAT mode
- B. The DNS ALG performs DNSSEC
- C. The DNS ALG performs DNS load balancing
- D. The DNS ALG performs the IPv4 and IPv6 address transformations
- E. The DNS ALG performs DNS doctoring.
Answer: C,D,E
NEW QUESTION 32
You want to deploy vSRX in Amazon Web Services (AWS) virtual private clouds (VPCs). Which two statements are true in this scenario? (Choose two.)
- A. MPLS LSPs can be used to connect vSRXs m different VPCs
- B. IPsec tunnels can be used to connect vSRXs in different VPCs
- C. The vSRX devices serving as local enforcement points for VPCs can be managed by a centralized Junos Space Security Director instance
- D. The vSRX devices serving as local enforcement points for VPCs can be managed by a centralized Junos Space Network Director instance
Answer: A,B
NEW QUESTION 33
Which feature is used when you want to permit traffic on an SRX Series device only at specific times?
- A. pass-through authentication
- B. counters
- C. scheduler
- D. ALGs
Answer: C
NEW QUESTION 34
In an Active/Active chassis cluster deployment, which chassis cluster component is responsible for RG0 traffic?
- A. the secondary node
- B. the primary node
- C. the master routing engine of the secondary node
- D. the backup routing engine of the primary node
Answer: B
NEW QUESTION 35
What are three valid virtual interface types for a vSRX? (Choose three.)
- A. SR-IOV
- B. fxp0
- C. virtio
- D. eth0
- E. VMXNET 3
Answer: A,B,E
NEW QUESTION 36
What are two elements of a custom IDP/IPS attack object? (Choose two )
- A. the seventy of the attack
- B. the attack signature
- C. the destination zone
- D. the exempt rulebase
Answer: A,B
NEW QUESTION 37
......
Juniper JN0-334 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
Additional Study Materials: Juniper Networks Technical Publications (19.1)
Another important resource to help you prepare for the Juniper JN0-334 exam is the Juniper Networks Technical Publications (19.1), which was released on 13th January 2021. This material is equivalent to the official study guide and gives a detailed overview of the certification exam topics. It starts by introducing the certification exam before highlighting what has changed over the years, the newly introduced concepts, resolved issues, documentation updates, and revision history. You can click on the chosen content and find everything you need to know about the test.
Authentic Best resources for JN0-334 Online Practice Exam: https://www.actualtestsquiz.com/JN0-334-test-torrent.html
