Oct 19, 2021 Step by Step Guide to Prepare for NACE-CIP1-001 Exam BrainDumps
CIP Level 1 NACE-CIP1-001 Real Exam Questions and Answers FREE Updated on 2021
NEW QUESTION 41
Common errors that can produce inaccurate readings when using Wet Film Thickness (WFT) gauges include:
Select All That Apply
- A. Dragging a gauge through wet coating
- B. Placing the gauge along the longitudinal axis
- C. Using a damaged gauge
Answer: A,C
NEW QUESTION 42
Passivation can best be described as:
- A. Complete elimination pf the corrosion process
- B. Treating metal with a liquid inhibiter
- C. A protective metallic oxide surface layer that slows corrosion
- D. A coating layer applied to the surface to inhibit corrosion
Answer: C
NEW QUESTION 43
As a NACE Coating Inspector your responsibility with respect to safety is to:
- A. Assume the role of the Safety Inspector
- B. Act in accordance with the site safety requirements and set an example
- C. Check the PPE used by the Applicators
- D. Check the credentials of the Safety Officer on site
Answer: B
NEW QUESTION 44
When holiday testing is required the Inspector is always required to enforce NACE SP 0188:
- A. True
- B. False
Answer: A
NEW QUESTION 45
An inspectors personal log book should contain:
- A. Subjective comments re ding the application team
- B. Objective comments regarding the application work
- C. No comments regarding the application team
- D. The inspector's personal opinions of the application team
Answer: C
NEW QUESTION 46
Non Conformance Reports are completed by the Inspector:
- A. In accordance with the specification's definition of a non-conformance
- B. In every instance that an item does not meet the specification requirements
- C. When the Inspector deems it to be a significant non-conforming item
- D. When the Inspector and Contractor deem it to be a significant non-conforming item
Answer: D
NEW QUESTION 47
NACE No. 4/SSPC-SP-7 is a joint standard for
- A. white metal blast cleaning.
- B. near-white metal blast cleaning.
- C. commercial blast cleaning.
- D. brush-off blast cleaning.
Answer: D
NEW QUESTION 48
When performing tests for oil and grease using an ultra-violet light, the NACE Inspector should be aware that:
- A. Synthetic oil or grease may not be identified
- B. Presence of weld spatter may produce a false positive
- C. Chloride salt may produce a false positive
- D. Ultra-Violet light may contaminant the surface
Answer: A
NEW QUESTION 49
On a blast-cleaned surface, Ian ultraviolet light is generally used to detect
- A. sulfates
- B. grease and oil
- C. soluble chemical salts
- D. inhibitor residues
Answer: B
NEW QUESTION 50
An Inspector should change position when:
- A. The Owner can save some money by the change
- B. The Inspectors position is not the majority position
- C. The Inspector is convinced by verifiable facts
- D. Only when directed by the supervisor
Answer: C
NEW QUESTION 51
Using SSPC Vis 1 as a guide when performing a visual inspection of a steel surface prior to surface preparation a NACE Inspector would assign which designations to the surface condition:
- A. Rust Grades A-D
- B. Rust Grades 1-4
- C. Surface Condition H
- D. Surface Conditions E-G
Answer: A
NEW QUESTION 52
When the joint NACE/SSPC abrasive blast cleaning standards are specified, the pictures in SSPC VIS 1 can be used as:
- A. Pass/fail criteria
- B. A final conflict resolution method
- C. A method to grade surface profile
- D. A general guide
Answer: D
NEW QUESTION 53
When working as a NACE Inspector in a situation where there is a difference of opinion, the Inspector needs to:
- A. Never change his/her mind
- B. Call the supervisor
- C. Go with the majority opinion
- D. Achieve consensus through negotiation
Answer: B
NEW QUESTION 54
The least effective method of surface cleaning is most likely
- A. hand tool cleaning.
- B. water blasting.
- C. power tool cleaning.
- D. dry grit blasting.
Answer: A
NEW QUESTION 55
Digital hygrometers
- A. consist of a bimetallic sensing element protected from wind gusts.
- B. are used to measure temperature from a distance.
- C. determine relative humidity, air temperature, and dew point temperature:
- D. use a thermocouple in contact with the surface to measure temperature
Answer: C
NEW QUESTION 56
......
Ultimate Guide to Prepare NACE-CIP1-001 Certification Exam for CIP Level 1: https://www.actualtestsquiz.com/NACE-CIP1-001-test-torrent.html
NACE-CIP1-001 Ultimate Study Guide: https://drive.google.com/open?id=1XQYOMXRbEMZXPbMZKzPP2Dl9bDU-Vl_p
