NS0-516 Practice Exam and Study Guides - Verified By ActualTestsQuiz Updated 180 Questions
2022 Updated Verified Pass NS0-516 Study Guides & Best Courses
NEW QUESTION 90
A company has a duplex E-Series system that is operating in a highly tuned environment. Load distribution between the controllers has been manually set up to achieve a specific distribution based on unique workload characteristics.
In this scenario, to maintain this load distribution over time, which E-Series feature should be disabled?
- A. DNS Load Balancing
- B. Storage Load Balancer
- C. Automatic Load Balancing
- D. Automatic Node Balancer
Answer: C
NEW QUESTION 91
Which type of caching on E-Series systems should be enabled according to NetApp recommended practices?
- A. Prefetch
- B. Read
- C. Write mirroring
- D. Write
Answer: C
NEW QUESTION 92
In which two locations would you find the WWPNs for a Windows host? (Choose two)
- A. FC switch
- B. Windows Device Manager
- C. host's BIOS
- D. HBA vendor's utility
Answer: A,D
NEW QUESTION 93
Which feature used on E-Series controllers enables them to ship I/O to the alternate controller?
- A. AVT
- B. TPGS
- C. RDAC
- D. ALUA
Answer: D
NEW QUESTION 94
Which sequence describes the procedures for hot-adding an additional expansion enclosure to an existing E-Series configuration? (Choose the best answer.)
- A. Add one ESM cable between it and another available expansion port, disrupt the other SAS connection to add second cable, power on expansion enclosure, check SANtricity for addition of the new enclosure.
- B. Power on expansion enclosure, add one ESM cable between it and another available expansion port, check SANtricity for addition of the new enclosure, disrupt the other SAS connection to add second cable
- C. Power on expansion enclosure,add one ESM cable between it andanother available expansion port, disrupt the other SAS connection to add second cable, check SANtricity for addition of the new enclosure.
- D. Add one ESM cable between it and another available expansion port, disrupt the other SAS connection to add second cable, check SANtricity for addition of the new enclosure, power on expansion enclosure.
Answer: D
NEW QUESTION 95
Which E-Series controller supports 56-Gbps infiniBand HICs?
- A. E2700
- B. DE5600
- C. E5600
- D. DE6600
Answer: C
NEW QUESTION 96
Which expansion shelf and E-Series model pairing is correct?
- A. DE5600 and E5660
- B. DE5600 and E2712
- C. DE5600 and E5612
- D. DE5600 and E2724
Answer: D
NEW QUESTION 97
Review the diagram.
Is this cabling correct or incorrect, and why? (Choose the best answer.)
- A. The cabling is incorrect because it uses the top-down bottom-up cabling method
- B. The cabling is correct for the dual stack cabling method
- C. The cabling is incorrect because the controllers are cabled from the host port.
- D. The cabling is incorrect because each controller goes to only one stack of disk shelves
Answer: B
NEW QUESTION 98
Which masking functions should you implement for each column to meet the data masking requirements?
To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 99
Which feature creates a full physical clone of a volume on an E-Series or EF-Series storage system?
- A. FlexClone
- B. Snapshot image
- C. Snapshot volume
- D. Volume Copy
Answer: D
NEW QUESTION 100
In the AMW, which tab provides access to Ethernet management port configuration and premium feature enablement? (Choose the best answer.)
- A. Configuration
- B. Storage & Copy Services
- C. Hardware
- D. Host Mappings
- E. Setup
Answer: E
NEW QUESTION 101
In-band communication occurs between which entities?
- A. One of the data I/O hosts and the controllers
- B. The management host and the Ethernet management ports
- C. The ESM and the I/O host
- D. One of the data I/O host's Ethernet port 1 and the expansion shelves
Answer: A
NEW QUESTION 102
What is the 'base' host connectivity provided by the E5400 Controller? (Choose the best answer.)
- A. SAS
- B. FC
- C. None
- D. iSCSI
- E. IB
Answer: B
NEW QUESTION 103
Which storage manager feature scans the system for issues, reports them, and suggests procedures that will correct the issue?
- A. Diagmon
- B. Recovery guru
- C. Performance monitor
- D. Event Log
- E. Storage array diagnostics
Answer: D
NEW QUESTION 104
Review the diagram.
Is this cabling correct or incorrect, and why? (Choose the best answer.)
- A. The cabling is incorrect because it usesthe top-down bottom-up cabling method.
- B. The cabling is incorrect because they have been daisy-chained.
- C. The cabling is correct because it follows the recommended E-Series cabling method.
- D. The cabling is incorrect because the controllers are cabled from the host port.
Answer: B
NEW QUESTION 105
What is a best practice recommendation for the automated system monitor? (Choose the best answer.)
- A. It should only be run on Windows server systems.
- B. It should be stopped during storage system normal operations.
- C. It should run on all storage manager clients.
- D. It should only run on one client connected to the storage system.
- E. It should be stopped during a controller firmware upgrade.
Answer: E
NEW QUESTION 106
How many paths provide optimal redundancy from a host through a switched topology to a storage system?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 107
What are two methods for setting the host protocol configuration on the E2800 controller with a 4-port 16Gbps FC or 10Gbps iSCSI SFP+ host interface card (HIC)? (Choose two)
- A. Change the feature pack in the SANtricity System Manager.
- B. Set in the hardware tab using SANtricity System Manager
- C. Change the QSFP type in the HIC
- D. Set at the factory based on the order.
Answer: A,C
NEW QUESTION 108
A company has just installed a NetApp EF600 storage array with an initial drive count of 12. A disk pool is created using all 12 disks. Benchmark testing now shows that system performance is far less than expected. Metrics show a very unbalanced use of the two PcIe busses and drives.
In this scenario, which action addresses this problem?
- A. Dynamically convert the volumes from RAID 10 to RAID 5.
- B. Build two equally sized pools during disk pool creation.
- C. Insert six drives into the first 12 slots and six drives into the last 12 slots.
- D. Adjust cache block sizes to 8k.
Answer: C
NEW QUESTION 109
The interval for an asynchronous mirror group should usually be equal to ______________. (Choose the best answer.)
- A. the amount of time required to copy the size of the mirror repository to the remote site
- B. the corresponding application's RTO
- C. the corresponding application's RPO
- D. half the corresponding application's RTO
- E. half the corresponding application's RPO
Answer: A
NEW QUESTION 110
......
Ultimate Guide to the NS0-516 - Latest Edition Available Now: https://www.actualtestsquiz.com/NS0-516-test-torrent.html
