New DC0-200 Dumps For Preparing Dell Certification Certified Dell Exam Well
Updated DC0-200 Dumps Questions Are Available [2025] For Passing Dell Exam
NEW QUESTION # 56
You want half of the six hard drives in your server to be on a separate SCSI bus. How would you achieve this?
- A. turn on the Split Backplane option in the PERC BIOS
- B. split the backplane to a 1x3 backplane
- C. add an additional processor to the server
- D. split the backplane to a 2x4 backplane
Answer: D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 57
You recently upgraded the BIOS on a managed system. However, you still see the old BIOS version on the ITA Summary page. What should you do to expedite the refreshing of that information by ITA?
- A. on the Logs tab, click the Refresh button
- B. using the Force Discovery menu, choose that system to carry out forced discovery and wait for the discovery to finish to get the refreshed information
- C. on the Status tab, click Main System Chassis to update the BIOS information
- D. using the Remove Discovered System menu, remove that system from the discovered systems
Answer: B
NEW QUESTION # 58
What does virtual disk refer to, as used in Dell Array Manager?
- A. contains the physical view of storage entities such as controllers, channels, and array disks
- B. a single array disk in an array of disks
- C. array disks or array disk segments presented to the OS as a single continuous block of storage space
- D. a block of storage accessed by a drive letter
Answer: C
NEW QUESTION # 59
Which action would you take to convert a 1x6 backplane to a 2x3?
- A. install a power distribution board
- B. install an interposer board
- C. add a second SCSI controller card
- D. attach a daughter card
Answer: D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 60
What are four valid event actions in ITA? (Choose four.)
- A. a forward event
- B. a page
- C. an alert popup
- D. an e-mail message
- E. a Windows event log insertion
Answer: B,C,D,E
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 61
Which is the appropriate method to change or migrate from RAID-5 to RAID-0 using Array Manager with an Adaptec PERC?
- A. Switch RAID Type
- B. Rearrange Virtual Disk
- C. Rebuild Array
- D. Reconfigure
Answer: D
NEW QUESTION # 62
Which two operations can be performed with the DSA CD? (Choose two.)
- A. create Windows 2000 driver/utilities diskette(s)
- B. change the Dell Service Tag via the Service Tag Utility
- C. create NetWare 5.1/6.0 driver/utilities diskette(s)
- D. run system diagnostics on your server
Answer: A,C
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 63
What should you do before removing or reseating the RAID memory?
- A. disconnect the RAID cable
- B. remove the hard drives
- C. disconnect the RAID battery
- D. disconnect the RAID key
Answer: C
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 64
What is the correct NIC teaming for the Intel Proprietary Method to accomplish load balancing?
- A. ALB
- B. AFT
- C. SLB
- D. ATF
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 65
Which keystroke is used to designate a single disk as a Hot Spare drive in the LSI Logic PERC controller?
- A. <Insert>
- B. <Space Bar>
- C. <F4>
- D. <F10>
Answer: C
NEW QUESTION # 66
How would you install Red Hat Linux and Dell-validated drivers for your factory-installed hardware using the Dell Server Assistant CD?
- A. autorun the CD from the GUI after Red Hat Linux is installed
- B. use the Dell Server Assistant CD to create a Utility Partition and launch the installation from the Utility Partition.
- C. boot to the Dell Server Assistant CD after installing Red Hat Linux
- D. boot the Dell Server Assistant CD and have the Red Hat Linux CDs available
Answer: D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 67
If there is a loss of power redundancy on your PowerEdge server, in which three ways can Dell OpenManage IT Assistant report this? (Choose three.)
- A. An SNMP trap can be logged in the OpenManage IT Assistant.
- B. Systems Status is marked as "Warning" in OpenManage IT Assistant.
- C. The status panel for that system indicates which power supply failed.
- D. Dell IT Assistant sends an alert to Dell OpenManage Server Administrator.
Answer: A,B,C
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 68
You are about to begin the installation of Windows 2000 Server on your PowerEdge server . As you inspect the System Setup Utility, you notice that the Asset Tag field is blank. What are two ways you can add the correct asset tag into the BIOS? (Choose two.)
- A. Flashing the BIOS to the latest revision automatically updates the Asset Tag field.
- B. You download the Asset Tag Utility from premiersupport.dell.com and use it to update the Asset Tag Field.
- C. Flashing the ESM to the latest revision automatically updates the Asset Tag field.
- D. After installing Windows 2000, you use the Asset Manager application from the Dell group in control panel to update the Asset Tag field.
- E. You create the Asset Tag Utility Diskette from the DSA CD and use it to update the Asset Tag field.
Answer: B,E
NEW QUESTION # 69
Which three statements are true about installing the Intel drivers and utilities that allow teaming in Windows 2000? (Choose three .)
- A. If you install the adapters after you have installed the OS, you can get the ProSet Utility from the Intel ProSet Utility CD.
- B. If you install the adapters after you have installed the OS, you can get the drivers from the Intel Network Drivers CD.
- C. You must install the ProSet Utility.
- D. You must install the Intel driver using floppy diskettes.
- E. Loading Windows 2000 using the DSA CD-ROM loads the drivers and ProSet Utility.
Answer: B,C,E
NEW QUESTION # 70
What is the correct NIC teaming for the Intel Proprietary Method to accomplish load balancing?
- A. ALB
- B. AFT
- C. SLB
- D. ATF
Answer: A
NEW QUESTION # 71
The system administrator of a mixed network environment consisting of both Microsoft Windows 2000 and Red Hat Linux wants to take advantage of the embedded NICs on the PowerEdge 2650 servers for network load balancing. Which scenario would work?
- A. You cannot configure network load balancing in multiple Network Operating Systems.
- B. configure Windows 2000 servers to use IPX and Linux servers to use IP
- C. configure Windows 2000 servers to use IP and Linux servers to use IP
- D. configure Windows 2000 servers to use IP and IPX and Linux servers to use IP and IPX
Answer: C
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 72
What is the maximum number of primary partitions allowed by Array Manager for three disk arrays?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 73
What is a dynamic volume as defined by Array Manager?
- A. a physical disk that has been marked as dynamic by Array Manager
- B. a logical volume that can be created from a dynamic disk
- C. a logical volume created from portions of one or more basic disks
- D. a volume that resides in the extended partition of a basic disk
Answer: B
NEW QUESTION # 74
Which three requirements must you meet to install OMSA in a Red Hat Linux environment? (Choose three.)
- A. The "ucd-snmp" or "net-snmp" package that is provided with the operating system must be installed.
- B. You must be logged in as root.
- C. You must do a custom installation to support Linux.
- D. The running kernel must have loadable module support enabled.
- E. You must purchase the Linux version of OMSA.
Answer: A,B,D
NEW QUESTION # 75
Which three statements are true about installing the Intel drivers and utilities that allow teaming in Windows
2000? (Choose three.)
- A. If you install the adapters after you have installed the OS, you can get the ProSet Utility from the Intel ProSet Utility CD
- B. If you install the adapters after you have installed the OS, you can get the drivers from the Intel Network Drivers CD.
- C. You must install the ProSet Utility.
- D. You must install the Intel driver using floppy diskettes.
- E. Loading Windows 2000 using the DSA CD-ROM loads the drivers and ProSet Utility.
Answer: B,C,E
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 76
......
Dell Exam 2025 DC0-200 Dumps Updated Questions: https://www.actualtestsquiz.com/DC0-200-test-torrent.html
