New 2021 JN0-1362 Dumps for JNCDS-SP Certified Exam Questions & Answer
Realistic Verified JN0-1362 exam dumps Q&As - JN0-1362 Free Update
NEW QUESTION 74
Your client asked you to design a solution with the requirements shown below.
- Have better traffic engineering for applications across an existing MPLS core.
- Support both IPv4 and IPv6 traffic
- Work with an MX Series core.
- Work with a North Star Controller
- Work with existing IGP (ISIS)
Which feature would you recommend be implemented in this solution?
- A. CoS-based forwarding
- B. segment routing
- C. zero touch provisioning
- D. opaque area LSAs
Answer: B
NEW QUESTION 75
You 2 VPN services to interconnect three of their sites.
- A. It selects the appropriate circuit on which to traverse the Layer 2 VPN.
- B. It maintains all customer Layer 3 routing information.
- C. It maintains an MP-BGP session to all other sites to exchange route information for the Layer 2 VPN.
- D. In this scenario, what are two functions of the CE device? (Choose two.)
- E. It maintains all MPLS LSPs between the sites.
Answer: B,E
NEW QUESTION 76
What are two considerations for using the public Internet for WAN connectivity? (Choose two.)
- A. It is inherently insecure, and additional encryption should be considered.
- B. End-to-end traffic is best effort.
- C. It is inherently secure and does not require additional encryption.
- D. End-to-end CoS and larger MTU are possible.
Answer: A,D
NEW QUESTION 77
You are asked to improve the convergence time in your large enterprise WAN Each branch office network is multihomed to two central aggregation points using BGP.
Which action would satisfy the requirement?
- A. Decrease interface hold timers.
- B. Use Bidirectional Forwarding Detection.
- C. Provision more WAN bandwidth.
- D. Increase interface hold timers.
Answer: B
NEW QUESTION 78
Your customer is automating the management of their WAN network by adding vendor-agnostic workflow applications.
Which Junos feature would be used with the workflow applications to manage Junos devices?
- A. REST API
- B. JSA scripts
- C. XML API
- D. Op scripts
Answer: A
NEW QUESTION 79
What are two considerations for all WAN designs that use best industry practices? (Choose two)
- A. to provide scalability
- B. to provide a dynamic routing protocol internally in the LAN
- C. to provide ease of deployment
- D. to provide VXLAN and EVPN solutions
Answer: A,C
NEW QUESTION 80
Your customer is deploying a multi-tenant data center and needs help with the WAN edge design.
What are two main design considerations for this environment? (Choose two)
- A. support for data collection and analysis
- B. support for unified threat management
- C. support for Virtual Chassis Control Protocol
- D. support for Network Address Translation
Answer: A,D
NEW QUESTION 81
Your customer wants an MPLS-based L3VPN service between multiple remote locations.
Which two statements are true regarding the customer's WAN edge devices? (Choose two )
- A. They must have EBGP configured.
- B. They require IP connectivity with the PEs.
- C. They must have MPLS configured.
- D. They require routes for all remote sites.
Answer: B,D
NEW QUESTION 82
You are asked to provide a design proposal for a service provider network that will need to support both IPv4 and IPv6 traffic across your IPv4 core. You do not want to change the core design.
In this scenario, what are two solutions that you would implement at the peering edge? (Choose two.)
- A. native IPv6 routing
- B. GRE tunneling
- C. NAT64
- D. 6PE
Answer: A,D
NEW QUESTION 83
You have a customer that operates multiple branch offices and they want a low cost access solution.
The WAN must be secure What would satisfy their requirement?
- A. an IPsec VPN using broadband connections
- B. a managed MPLS service
- C. a private WAN
- D. an encrypted MPLS service
Answer: A
NEW QUESTION 84
Which technology allows a router to continue to forward packets even if the routing protocol adjacencies go down?
- A. nonstop routing
- B. nonstop bridging
- C. graceful restart
- D. graceful Routing Engine switchover
Answer: C
NEW QUESTION 85
You work for a service provider that offers Layer 2 services. One of the customers is purchasing Layer 2 VPN services to interconnect several sites.
In this scenario, which two functions are provided by the PE router? (Choose two )
- A. It maintains all customer Layer 3 routing information.
- B. It maintains an MP-BGP session with each customer site to exchange customer routing information
- C. It selects the appropriate Layer 2 VPN in the service provider network.
- D. It maintains MPLS LSPs between the sites.
Answer: A,B
NEW QUESTION 86
You are asked to create a point-to-multipoint DCI that does not overwhelm the data plane with MAC learning traffic.
Which protocol would you use in this situation?
- A. EVPN
- B. VPLS
- C. PPTP
- D. pseudowire
Answer: B
NEW QUESTION 87
You are designing a full mesh of connections between multiple enterprise In this scenario, which two statements are correct? (Choose two.)
- A. All sites are able to communicate directly with each other
- B. Security and Internet control is applied at a central location
- C. IPsec tunnels can be used to secure traffic between sites.
- D. It is easier for administrators to enforce application-aware services with a single point of management.
Answer: A,B
NEW QUESTION 88
You are working on a multi-Data Center interconnect (DCI) solution. Your WAN is based upon a multipoint MPLS Layer 3 VPN. This design must provide Layer 2 connectivity between the data centers across your WAN.
Which technology would satisfy the requirement?
- A. VRRP
- B. EVPN
- C. RTG
- D. VCF
Answer: B
NEW QUESTION 89
You are creating a design proposal for a new service provider network using MX Series devices. You must design an OoB management network that is isolated from the production network.
In this scenario which two statements are correct? (Choose two)
- A. The management network should connect to a separate network infrastructure.
- B. The FXPO interface can be used to connect devices to the management network.
- C. You must use the console port to access the devices on the management network.
- D. The management network should connect to the production network infrastructure.
Answer: A,B
NEW QUESTION 90
Exhibit.
Which routing protocol design will accomplish these goals?
- A. Enable a full mesh of IBGP sessions between the routers in ISP B.
- B. Configure each router in ISP B to peer with a par of route reflectors.
- C. Redistribute the BGP routes learned from ISP A into the OSPF instance running in ISP B.
- D. Configure static routes to ISP A on each router within ISP B.
Answer: B
NEW QUESTION 91
Exhibit.
Referring to the exhibit, which two methods would be used by the designer of ISP E to ensure that traffic between ISP C and ISP A will traverse through ISP B? (Choose two.)
- A. Apply the BGP import policy (to EBGP peers) on R4 to adjust the ORIGIN for the routes received from ISP B to unknown.
- B. Apply the BGP export policy (to IBGP peers) on R4 and R5 to adjust the MED on the ISP C routes so that the path through ISP D is less preferred.
- C. Apply the BGP import policy (to EBGP peers) on R4 anaVor R5 to adjust the local preference on the ISP C routes so that the path through ISP B is more preferred
- D. Apply the BGP import policy (to EBGP peers) on R4 and R5 to modify the AS PATH attribute so that the path through ISP D is less preferred.
Answer: B,D
NEW QUESTION 92
Which two statements about a customer's WAN connectivity are correct? (Choose two)
- A. SD-WAN requires an IPsec tunnel to connect customer sites across the Internet.
- B. Layer 3 managed services automatically include Layer 2 provisioning to support the customer's needs.
- C. Layer 2 managed services connects the customer's sites and the customer provides their own routing capability.
- D. SD-WAN dynamically manages customer traffic across multiple WAN connections.
Answer: C,D
NEW QUESTION 93
You are preparing to purchase WAN services from a service provider You are required to protect all Layer 2 and higher traffic from injection wiretapping, man-in-the-middle, and playback type attacks.
Which solution would satisfy this requirement?
- A. Use Layer 3 VPN services from the service provider
- B. Use Layer 2 VPN services from the service provider.
- C. Use MACsec between locations.
- D. Use IPsec between locations.
Answer: D
NEW QUESTION 94
What are two risks when using a source-based RTBH solution? (Choose TWO)
- A. The target of the attack may not support RTBH.
- B. The attacker's address could be unknown.
- C. The attacker address could be a CGNAT address resulting in a larger service outage for users.
- D. The target of an attack would be blocked resulting in a target being offline.
Answer: A,C
NEW QUESTION 95
You are designing several MPLS virtual routing and forwarding (VRF) instances on all provider edge (PE) routers. Routes within each VRF should be exchanged between all PE routers provisioned for that VRF.
For each VRF routing instance which two attributes must match on all related PE routers? (Choose two )
- A. interfaces
- B. VRF target
- C. router ID
- D. instance type
Answer: B,D
NEW QUESTION 96
......
Use Real JN0-1362 Dumps - 100% Free JN0-1362 Exam Dumps: https://www.actualtestsquiz.com/JN0-1362-test-torrent.html
