[Mar 01, 2025] 1z0-1118-23 Ultimate Study Guide - ActualTestsQuiz
Ultimate Guide to Prepare 1z0-1118-23 Certification Exam for Oracle Cloud in 2025
Oracle 1z0-1118-23 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION # 14
What is the smallest interval of incremental data load to the FAW data warehouse?
- A. Daily
- B. Hourly
- C. Weekly
Answer: A
Explanation:
Explanation
The smallest interval of incremental data load to the FAW data warehouse is daily. You can configure the incremental refresh frequency for each functional area in the pipeline settings. The minimum frequency that you can set is daily, which means that the data pipeline will run once every 24 hours and bring in the latest data from your Fusion Applications4. You cannot set the frequency to be hourly or weekly, as these are not supported by FAW.
NEW QUESTION # 15
You want to do data validation for one of your critical metrics in FAW. However, you cannotmetric as part of predefined data validation.
How can you validate your metric?
- A. You have to do it manually. You need to create a report in OTB1 for that metric and then compare it with the value in FAW.
- B. This feature is not available yet. You must wait until FAW support that metric for data validation.
- C. You must open a ticket with Oracle support.
Answer: A
Explanation:
Explanation
You need to create a report in OTBI for that metric and then compare it with the value in FAW. Explanation:
To validate your metric that is not part of the predefined data validation in FAW, you have to do it manually.
You need to create a report in OTBI for that metric and then compare it with the value in FAW. You can use the Data Validation workbook in FAW to view the details of the predefined data validation1. You do not need to wait for FAW to support that metric or open a ticket with Oracle support for this purpose
NEW QUESTION # 16
Fusion Analytics Warehouse (FAW) allows you to select the Descriptive Flexfields (DFFs) you want to move to your data warehouse.
What setup must you ensure in your Fusion Application for FAW to perform this operation7
- A. Create a BICC extract for DFFs and schedule the same in your Fusion Application.
- B. Ensure the DFFs are configured and validated in your Fusion Application.
- C. Ensure that the DFFs and their attributes are Bl-enabled in your Fusion Application.
Answer: C
Explanation:
Explanation
The DFFs and their attributes must be BI-enabled in order to be extracted by the FAW data pipeline and loaded into the data warehouse. BI-enabling a DFF means that it is exposed as a column in a view object that is part of a subject area in Oracle Transactional Business Intelligence (OTBI). This allows FAW to access the DFF data through OTBI web services.
Verified References: Use Descriptive Flexfields, section 23.1; About Flexfields, section "Use Flexfields in Your Data Model".
NEW QUESTION # 17
In the FAW Security framework, what purpose do the system groups (like FAW Licensed ERP Authorize and FAW Functional Administrator) help serve?
- A. They define job-specific roles for users.
- B. Duty and data rotes are mapped to system groups before they are assigned to users.
- C. They giant a user access to FAW based on the system groups to which they are assigned.
Answer: C
Explanation:
Explanation
The purpose of the system groups (like FAW Licensed ERP Authors and FAW Functional Administrator) in the FAW Security framework is to grant a user access to FAW based on the system groups to which they are assigned. System groups are predefined groups that specify the user's system permissions, such as whether they can consume, author, or administer content for a specific module5. System groups do not map duty and data roles or define job-specific roles for users.
NEW QUESTION # 18
You noticed that the scheduled incremental data refresh has started.
What operations are disabled during the refresh?
- A. FAW subject areas are not accessible.
- B. FAW decks are disabled
- C. Ad hoc data refresh for functional areas are not possible while a scheduled data load is ongoing.
Answer: C
Explanation:
Explanation
The operations that are disabled during the scheduled incremental data refresh are ad hoc data refresh for functional areas and semantic model extensions. You cannot perform an ad hoc data refresh for a functional area while a scheduled data load is ongoing, as this may cause conflicts or errors in the data pipeline3. You also cannot perform semantic model extensions while a scheduled data load is ongoing, as this may cause inconsistencies or corruption in the semantic model1. FAW subject areas and decks are not disabled during the refresh, but they may show outdated or incomplete data until the refresh is completed.
NEW QUESTION # 19
FAW allows you to define custom data security to meet complex requirements.
What steps would you take to override the default data security for specific users?
- A. You must create reports for your target users with filters that meet your security requirements.
- B. You need to create a custom duty role and set up data filters that specify the values for specific dimensions.
- C. You need to create a custom data role and set up data filters that specify the values for specific dimensions.
Answer: C
Explanation:
Explanation
The steps that you would take to override the default data security for specific users are to create a custom data role and set up data filters that specify the values for specific dimensions. A custom data role allows you to define custom data security filters and apply them to dimensions, facts, or subject areas. You can then assign the custom data role to the users who need to have different data access than the default2. You do not need to create a custom duty role or create reports with filters to override the default data security.
NEW QUESTION # 20
Which is a prerequisite for creating a data pipeline for any functional area?
- A. Setting up the Pipeline parameters
- B. Configuring single sign-on
- C. Completing data security assignments
Answer: A
Explanation:
Explanation
The prerequisite for creating a data pipeline for any functional area is setting up the pipeline parameters. The pipeline parameters define the global settings for the data pipeline, such as the source application URL, credentials, notification email, incremental refresh frequency, and retention period4. Configuring single sign-on and completing data security assignments are not prerequisites for creating a data pipeline, but they are recommended for securing access to FAW and Fusion Applications5
NEW QUESTION # 21
Which data sources are available for Data Augmentation?
- A. The Oracle Fusion Application transactional database
- B. The same data sources as OAC connectors
- C. Fusion Applications and additional data connections available in FAW
Answer: C
Explanation:
Explanation
The data sources that are available for Data Augmentation are Fusion Applications and additional data connections that are available in FAW. You can use Manage Connections to create connections to various data sources, such as Oracle Database, Oracle Autonomous Database, Oracle Object Storage, Oracle Applications Cloud, and others4. You can then use Data Augmentation to select the columns from these data sources and create datasets for analysis
NEW QUESTION # 22
You are in the process of implementing complex data security.
How would you secure your Fact table using data filters from different dimensions?
- A. Create multi-table data sets in OAC and create a custom report.
- B. Use functional groups to combine the data filters using the OR and AND operators.
- C. Currently, this scenario is not supported.
Answer: B
Explanation:
Explanation
The way that you would secure your Fact table using data filters from different dimensions is to use functional groups to combine the data filters using the OR and AND operators. Functional groups are logical groups of dimensions that can be used to apply data filters on a Fact table. You can use functional groups to specify complex filter criteria that involve multiple dimensions and operators3. You do not need to create multi-table data sets in OAC or accept that this scenario is not supported.
NEW QUESTION # 23
You plan on using single sign-on (SSO) to access Oracle Fusion Analytics Warehouse (FAW). Describe your setup sequence for implementing SSO.
- A. The setup sequence of single sign-on and FAW instance creation doesn't matter.
- B. Create the FAW instance first, before proceeding with the setup of single sign-on (SSO).
- C. Set up single sign-on (SSO) before proceeding with the FAW instance creation.
Answer: C
Explanation:
Explanation
The setup sequence for implementing SSO to access FAW is to set up SSO before proceeding with the FAW instance creation. You need to configure SSO between your identity provider (IdP) and Fusion Applications before you provision your FAW instance. This will enable SSO and synchronization of users and job roles between Fusion Applications and FAW4. You cannot create the FAW instance first or ignore the setup sequence for implementing SSO
NEW QUESTION # 24
You want to create a custom report in FAW using OAC. You have access to the FAW subject areas and the data sets that you created using Data Augmentation. Which tool in OAC should you use to create your report?
- A. Data Flow
- B. Data Modeler
- C. Data Visualization
Answer: C
Explanation:
Explanation
The tool in OAC that you should use to create your report in FAW using the FAW subject areas and the data sets that you created using Data Augmentation is Data Visualization. Data Visualization is a feature in OAC that allows you to create and share interactive visualizations, stories, and dashboards. You can use Data Visualization to connect to the FAW subject areas and the data sets that you created using Data Augmentation and explore the data using various charts, maps, tables, and filters12. You do not need to use Data Modeler or Data Flow to create your report in FAW, as these are not tools for creating reports, but for creating data models and data transformations
NEW QUESTION # 25
During the creation of the FAW instance, you have to provide the Fusion Applicationconnection details andauthentication information.
Which method of authentication is recommended by Oracle?
- A. Password-based
- B. JSON Web Token
- C. Multi-factor authentication
Answer: B
Explanation:
Explanation
JSON Web Token (JWT) is the recommended method of authentication by Oracle for creating the FAW instance. JWT is a secure and self-contained way of transmitting information between parties as a JSON object. It is used to assert some number of claims
NEW QUESTION # 26
You are unable to locate some data elements in your FAW instance subject areas that exist in OTBI.
Which feature in FAW supports both data movement and semantic model extensibility to provide the missing data elements?
- A. OAC Data Flow
- B. Bundles
- C. Data Augmentation
Answer: C
Explanation:
Explanation
Data Augmentation is a feature in FAW that supports both data movement and semantic model extensibility to provide missing data elements. Data Augmentation allows you to extract data from additional data sources that are not part of the FAW data pipeline and load them into ADW. You can then use the data to customize the semantic model and create new dimensions, facts, and subject areas2
NEW QUESTION # 27
You want to edit global data pipeline parameters. How do you ensure that your changes are deployed and data is consistent?
- A. You must reset the data warehouse and activate the functional areas to ensure changes are effective during the next pipeline run.
- B. Changes to the global pipeline parameter take effect immediately.
- C. Changes to the global pipeline parameter take effect at the next incremental upload.
Answer: C
Explanation:
Explanation
The way to ensure that your changes to the global pipeline parameters are deployed and data is consistent is to wait for the next incremental upload. Changes to the global pipeline parameters take effect at the next incremental upload, which is scheduled based on the frequency that you set in the parameters9. You do not need to reset the data warehouse or activate the functional areas for this purpose. Changes to the global pipeline parameters do not take effect immediately.
NEW QUESTION # 28
You have created a fact, a dimension, and a new subject area using Data Augmentation.
You want to extend the dimension m your newly created subject area by adding new attribute data source.
What steps are required to achieve this?
- A. The only available option is to modify your ADW custom schema and your Data Augmentation.
- B. The dimensions created in Data Augmentation are not available in Semantic Model Extensions.
- C. Create a branch and add "Extend a Dimension''.
Answer: C
Explanation:
Explanation
You can extend the dimension that you created using Data Augmentation by using Semantic Model Extensions. You need to create a branch and add a step of "Extend a Dimension". Youcan then select the dimension that you want to extend and add a new attribute data source from another table or view
NEW QUESTION # 29
Currently, you have set up SSO for Fusion Applications between Act.ve Directory and Fusion Applications is it possible to also set up SSO between Fusion Applications and FAW in this case?
- A. possible, and the configuration process to set up SSO between Fusion Applications and FAW stays the same.
- B. This is a complex configuration, and it is highly discouraged.
- C. No, this configuration is not supported.
Answer: A
Explanation:
Explanation
It is possible to set up SSO between Fusion Applications and FAW in this case, where you have already set up SSO for Fusion Applications between Active Directory and Fusion Applications. The configuration process to set up SSO between Fusion Applications and FAW stays the same, regardless of whether you use Active Directory or another IdP as your primary authentication source5. This configuration is supported and not complex or discouraged by Oracle.
NEW QUESTION # 30
When choosing a Cloud Account for activating Fusion Analytics Warehouse (FAW), which recommendation does Oracle provide?
- A. No recommendation is provided by Oracle on your choice of Cloud Account for the activation of FAW.
- B. Activate FAW subscription into the same Oracle Cloud account as your Oracle Fusion Cloud Applications.
- C. Activate your FAW subscription in a separate Oracle Cloud account. The Oracle Cloud account for your Oracle Fusion Cloud Applications should be exclusively for use by the cloud applications.
Answer: B
Explanation:
Explanation
The highly recommended best practice is to activate your new UCC subscription into your Oracle Fusion Cloud Applications account followed by activating your Oracle Fusion Analytics Warehouse subscription into the same Oracle Cloud account as your Oracle Fusion Cloud Applications12
NEW QUESTION # 31
......
Oracle Cloud Fundamentals-1z0-1118-23 Exam-Practice-Dumps: https://www.actualtestsquiz.com/1z0-1118-23-test-torrent.html
Use Real 1z0-1118-23 Dumps - Oracle Correct Answers: https://drive.google.com/open?id=1XXVOCh8qWnPPvIpe0cw_cA5VPiNa6oTk
