Latest NS0-527 Pass Guaranteed Exam Dumps with Accurate & Updated Questions
NS0-527 Exam Brain Dumps - Study Notes and Theory
NetApp NS0-527 Exam Topics:
| Section | Objectives |
|---|---|
| NetApp ONTAP Core Data Protection | - Demonstrate knowledge of Snapshot technologies - Describe methods of data protection or data redundancy on an ONTAP system - Demonstrate the use of data efficiencies as it relates to data protection - Describe NetApp ONTAP data protection mechanisms - Demonstrate knowledge of how to troubleshoot protection configurations |
| Data Protection Design Solutions | - Describe how to design data protection solutions - Describe the use of Snapshot technology - Describe network connectivity requirements |
| NetApp Data Protection Software | - Describe how to install NetApp data protection software - Demonstrate knowledge of how to administer NetApp data protection software |
| NetApp ONTAP Replication Solutions | - Describe SnapMirror technologies - Demonstrate how to administer hybrid cloud data protection solutions |
| NetApp ONTAP Business Continuity Solutions | - Demonstrate knowledge of MetroCluster operations - Demonstrate knowledge of SnapMirror business continuity solutions - Demonstrate knowledge of SVM-DR operations |
NetApp NS0-527 Exam Certification Details:
| Recommended Training | ONTAP Data Protection Administration (ILT) ONTAP MetroCluster Installation (ILT) ONTAP Data Protection Fundamentals (WBT) |
| Exam Registration | PEARSON VUE |
| Exam Price | $150 USD |
| Exam Name | Implementation Engineer Data Protection Specialist |
| Sample Questions | NetApp NS0-527 Sample Questions |
| Exam Code | NS0-527 NCIE-Data Protection Specialist |
| Duration | 90 minutes |
| Number of Questions | 60 |
| Passing Score | 65% |
NEW QUESTION 35
Which attribute does Data ONTAP use the identify Snapshot copies between primary and secondary FlexVol volumes in a SnapVault relationship?
- A. Snapshot prefix
- B. SnapMirror label
- C. FlexVol name
- D. SnapMirror policy
Answer: B
NEW QUESTION 36
Click the Exhibit button.
A customer is interested in using SnapCenter to support Snapshot copies with their Oracle DB. They virtualized their environment but do not have any block protocols available.
In this solution, which protocol shown in the exhibit is supported?
- A. SMB3
- B. FC
- C. NFS
- D. iSCSI
Answer: C
NEW QUESTION 37
You are calculating transfer timefor SnapMirror replication between two NetApp clusters.
Which three factors should be included in your consideration? (Choose three.)
- A. data size to transfer
- B. latency between clusters
- C. TCP window size
- D. SnapMirror schedule
- E. retention policy
Answer: A,B,C
NEW QUESTION 38
You are working for a customer that has deployed a large FlexGroup with ONTAP 9.5. This FlexGroup has a SnapMirror relationship to a system at a disaster recovery site. The FlexGroup is nearly full and needs to be expanded to accommodate additional data.
In this scenario, what must you do to expand the FlexGroup and ensure that the data remains protected?
- A. Expand the source FlexGroup nondisruptively, and update the SnapMirror.
- B. Break the SnapMirror relationship, expand the source FlexGroup, and re-baseline the SnapMirror.
- C. Offline the source FlexGroup, add additional volumes, bring it online, and update the SnapMirror.
- D. Break the SnapMirror relationship, expand the source FlexGroup, and update the SnapMirror.
Answer: B
NEW QUESTION 39
A customer has application data corruption on a LUN that is in a volume with six other data LUNs. The customer needs to restore the corrupted LUN from a Snapshot copy without affecting the other six LUNs.
Which process would accomplish this task?
- A. Use a single-file restore.
- B. Use LUN mapping.
- C. Use the volume Snapshot partial-restore file.
- D. Use volume SnapRestore.
Answer: D
NEW QUESTION 40
You are upgrading your Data ONTAP cluster from clustered Data ONTAP 8.3 to clustered Data ONTAP 9.1.
Which two actions mustbe performed for the SnapMirror relationships? (Choose two.)
- A. Break existing SnapMirror relationships.
- B. Delete the obsolete SnapMirror Snapshot copies which were created in Data ONTAP 8.3.
- C. After the upgrade, resynchronize, and resume SnapMirror relationships.
- D. Delete and re-create SnapMirror relationships.
Answer: A,C
NEW QUESTION 41
You have deployed volume-level replication with NetApp Synchronous SnapMirror replication technology.
In this scenario, which two statements are true? (Choose two.)
- A. In Sync mode, the application I/O fails if the write to the secondary storage is not completed, thereby ensuring that the primary and secondary storage are identical.
- B. In StrictSync mode, the application is allowed to continue writing to the primary storage if the write to the secondary storage is not completed.
- C. In StrictSync mode, the application I/O fails if the write to the secondary storage is not completed, thereby ensuring that the primary and secondary storage are identical.
- D. In Sync mode, the application is allowed to continue writing to the primary storage if the write to the secondary storage is not completed.
Answer: C,D
NEW QUESTION 42
You have deployed the DP_Optimized (DPO) license on the destination cluster to support a high number of volumes and peer relationships for setting up data protection with multiple sourceclusters. You want to obtain a list of unprotected volumes on the source cluster and protect them.
Which two management tools would be used to accomplish this task? (Choose two.)
- A. OnCommand Insight
- B. OnCommand System Manager
- C. ONTAP CLI
- D. OneCollect
Answer: B,C
NEW QUESTION 43
A customer is using SnapCenter and they want to see details about:
1.) unprotected databases outside of resource groups,
2.) databases that have not been backed up during the report period,
3.) databases that belong to a resource group for which backups have failed, and
4.) the database SnapVault status.
In this scenario, which report type satisfies the requirements?
- A. Restore Report
- B. Clone Report
- C. Plug-in Report
- D. Backup Report
Answer: C
NEW QUESTION 44
You have a VMware VSphere environment with SRM and NetApp SRA fully configured.
Which twostatements are true? (Choose two.)
- A. NetApp SRA supports the failover of SnapVault and SnapMirror relationships.
- B. NetApp SRA supports the use of the FC protocol at one site and the iSCSI protocol at the other site.
- C. NetApp SRA supports both LUN attached and NFS mounted datastores.
- D. NetApp clustered Data ONTAP supports a mixed ALUA configuration where some igroups have ALUA enabled and others do not.
Answer: B,C
NEW QUESTION 45
Click the Exhibit button.
cluster2::>snapmirror show -instance
Source Path: svm1:svm1_vol3
Destination Path: svm1_2:svm1_2_vol2
Relationship Type: DP
Relationship Group Type: none
SnapMirror Schedule: 5min
SnapMirror Policy Type: async-mirror
SnapMirror Policy: DPDefault
Tries Limit: -
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Last Transfer Type: update
Last Transfer Error: -
Last Transfer Size: 72 KB
Last Transfer Network Compression Ratio: 1:1
Last Transfer Duration: 0:0:2
Last Transfer From: svm1:svm1_vol3
Last Transfer End Timestamp: 09/24 13:10:04
Progress Last Updated: -
Relationship Capability: 8.2 and above
Lag Time: 0:0:55
Number of Successful Updates: 1
Number of Failed Updates: 0
Number of Successful Resyncs: 0
Number of Failed Resyncs: 0
Number of Successful Breaks: 0
Number of Failed Breaks: 0
Total Transfer Bytes: 212992
Total Transfer Time in Seconds: 5
You want to view your SnapMirros relationship to make sure it is up to date. You issue the snapmirror show -instance command. Referring to the exhibit, how long has it been since the last SnapMirror update has successfullyoccurred?
- A. 55 seconds
- B. 55 minutes
- C. 5 seconds
- D. 5 minutes
Answer: A
NEW QUESTION 46
You recently set up a SnapMirror relationship with a daily update schedule. You want to verify that the updates are being performed daily.
Which two actions inside OnCommand System Manager would you ensure that the SnapMirror transfers are occurring daily? (Choose two.)
- A. In the Jobs window, verify that all manual Snapshot copy operations have completed in the past 24 hours.
- B. In the Jobs window, verify that all SnapMirror jobs have completed within the past 24 hours.
- C. In the Relationships window, verify that the lag time is less than 24 hours.
- D. In the Relationships window, verify that the relationship state was broken in the past 24 hours.
Answer: B,C
NEW QUESTION 47
A customer wants to set up an SVM DR relationship to protect a source SVM that is dedicated for NAS file services. The source and destination clusters are running ONTAP 9.5.
In this scenario, which application accomplishes this task?
- A. OnCommand Unified Manager
- B. OnCommand System Manager
- C. Snap Creator
- D. SnapCenter
Answer: B
NEW QUESTION 48
You are configuring SnapMirror on the NetApp Cloud Backup appliance (formerly AltaVault).
In this scenario, which LIF type IP addresses must be white listed?
- A. nodemanagement
- B. cluster management
- C. cluster
- D. intercluster
Answer: D
NEW QUESTION 49
Click the Exhibit button on the right.
You have an AFF A300 controller with four volumes in the aggregate that is shown in the exhibit. You replicate all four volumes to one aggregate on a FAS8200 controller in a different cluster.
Referring to the exhibit, what are the storage efficiency savings on the destination FAS8200?
- A. 2:1
- B. 4.28:1
- C. 5.78:1
- D. 1.5:1
Answer: C
NEW QUESTION 50
Which technology uses synchronous replication?
- A. MetroCluster mirrored aggregate
- B. FabricPool
- C. SnapMirror XDP
- D. SVM DR
Answer: C
NEW QUESTION 51
You are asked to verify that data stored in your disaster recovery site can be restored and is viable. Currently, you have a NetApp SnapMirror relationship with a MirrorAllSnaps policy type that is enabled and is updating frequently.
What would be a nondisruptive method to carry out a detailed validation of your disaster-recovery strategy?
- A. Break the SnapMirrorrelationship and validate the data.
- B. Perform a SnapMirror reverse resynchronization to restore the data from the destination cluster to the source cluster, and validate the data.
- C. Use SyncMirror on the destination aggregate on the destination cluster, and validate the data.
- D. Create a FlexClone volume of the destination volume on the destination cluster, and validate the data.
Answer: B
NEW QUESTION 52
You want to configurea SnapMirror transfer throttle to consume less network bandwidth.
In the output of the snapmirror show command, which three statistics would you use? (Choose three.)
- A. Total Transfer Time inSeconds
- B. Last Transfer Error
- C. Last Transfer Type
- D. Last Transfer Size
- E. Last Transfer Duration
Answer: A,B,D
NEW QUESTION 53
A customer wants to enforce prompt tiering when the cooling threshold has been reached.
They want to do this even though the data may have been deleted or the data continues to exist in the primary file system.
In this scenario, which tiering policy should be used?
- A. Backup
- B. Snapshot-only
- C. None
- D. Auto
Answer: D
NEW QUESTION 54
You have an environment with multiple database servers that are performing scheduled nightly dumps. These dumps vary in both the time to complete and the size of data produced. You need to ensure that there is always enough room in the volume for the data and that a nightly SnapMirror update does not take place until the database dump process is complete.
In this scenario, which NetApp tool ensures that this process is completed every night?
- A. OnCommand Insight
- B. OnCommand Workflow Automation
- C. OnCommand Unified Manager
- D. OnCommand System Manager
Answer: D
NEW QUESTION 55
You just created a mirror relationship using OnCommand System Manager in ONTAP 9.3.
You review the relationship using the CLI.
In this scenario, what is the expected type and default SnapMirrorpolicy?
- A. XDP and DPDefault
- B. XDP and MirrorAllSnapshots
- C. DP and DPDefault
- D. DP and XDPDefault
Answer: A
NEW QUESTION 56
You want to back up a critical Oracle database that resides on a LUN on the NetApp storage system. You decide that a Snapshot copy is the most efficient way to back up the database. You cannot afford to create any down time for the database.
What must you do to ensure that the data in the database is consistent when you create the Snapshot copy?
- A. Have the database administrator issue a checkpoint to the database then use SnapDrive for Unix to take the Snapshot copy of the database LUN.
- B. Use SnapManager for Oracle to take the Snapshot copy backup.
- C. Disable SnapDrive for Unix then run the backup from SnapManager for Oracle.
- D. Use SnapDrive for Unix to take the Snapshot copy of the database LUN.
Answer: D
NEW QUESTION 57
......
Pass Network Appliance NS0-527 Test Practice Test Questions Exam Dumps: https://www.actualtestsquiz.com/NS0-527-test-torrent.html
The Best NCIE-DP Study Guide for the NS0-527 Exam: https://drive.google.com/open?id=1P8PErl-ZlUuHt9GjhG3VckFmG5IKuTVz
