Latest Mar-2023 Network Appliance NS0-176 Dumps Updated 141 Questions
PDF Download Free of NS0-176 Valid Practice Test Questions
NetApp NS0-176 Exam Certification Details:
| Number of Questions | 60 |
| Sample Questions | NetApp NS0-176 Sample Questions |
| Exam Registration | PEARSON VUE |
| Exam Price | $150 USD |
| Exam Name | Cisco and NetApp FlexPod Implementation and Administration |
| Duration | 60 minutes |
| Exam Code | NS0-176 FlexPod |
NEW QUESTION 65
When creating a virtual machine in VMware vSphere 5.x, which type of virtual disk should be provisioned if you would like to fully pre-allocate storage with the highest chance of being contiguous?
- A. Full Provision
- B. Thick Provision Eager Zeroed
- C. Thin Provision
- D. Thick Provision Lazy Zeroed
Answer: B
NEW QUESTION 66
Which service may be used to manage users and groups in a vSphere environment?
- A. Network Time Protocol (NTP)
- B. Microsoft Active Directory (AD)
- C. Domain Name System (DNS)
- D. VMware vSphere Storage APIs for Array Integration (VAAI)
Answer: B
NEW QUESTION 67
Which three are characteristics of a NAS data LIF? (Choose three.)
- A. It is associated with the management LIF.
- B. It can be associated with a Fibre Channel port.
- C. It can be associated with a WWPN
- D. It can be associated with an Ethernet port or VLAN interface.
- E. It can be associated with an IP address.
- F. It can be associated with an interface group (ifgrp).
- G. It is associated with the administrative Vserver.
Answer: D,E,F
NEW QUESTION 68
Which feature allows Cisco Nexus 7000 Series switches to be virtualized at the device level?
- A. VDC
- B. PONG
- C. VRF
- D. VLAN
Answer: A
NEW QUESTION 69
Which aggregates should be disabled for data aggregates?
- A. Snapshot copies
- B. SnapMirror copies
- C. FCP
- D. iSCSI
Answer: A
NEW QUESTION 70
Your UCS environment has recently been upgraded to include UCS B-Series Servers, UCS C-Series Servers, a UCS mini, and a fourth UCS domain. With these new changes, you need a management tool to help you manage the entire environment from a single location.
In this scenario, which tool would you use?
- A. UCS Manager
- B. UCS Director
- C. Cisco Smart Advisor
- D. UCS Central
Answer: D
NEW QUESTION 71
A customer uses Cisco Intersight and now wants to monitor their NetApp storage system with Intersight.
In this scenario, which three actions must be completed to accomplish this task? (Choose three.)
- A. Activate the API Gateway in Active IQ Unified Manager.
- B. Get an Intersight Advantage tier license.
- C. Deploy Active IQ Unified Manager.
- D. Activate the API Gateway in ONTAP System Manager.
- E. Get an Intersight Essentials tier license.
Answer: A,B,C
NEW QUESTION 72
Which two are true about Fabric Interconnect L1 and L2 ports in cluster mode? (Choose two)
- A. Ports can run as a port channel or as individual links
- B. Ports can only run as individual links
- C. Fabric Interconnect ports L1 and L2 are 10 Gb links
- D. Fabric Interconnects connected via L1/L2 have to be the same model except during the upgrade
- E. Ports can only run as a port channel
- F. Ports are primarily used for management traffic, but can be used for data traffic as well
Answer: D,E
NEW QUESTION 73
You are asked to create an interface group on a NetApp clustered Data ONTAP system. The system is connected to a Cisco Nexus switch in a vPC configuration with the port-channel mode set to active.
Which NetApp interface group made matches this switch configuration?
- A. multimode_lacp
- B. mode active
- C. multimode
- D. singlemode
Answer: D
NEW QUESTION 74
Click the Exhibit button.
On your NetApp storage system, you create a volume named datastore1, mount it to a junction path, and then set the correct export policy. When you attempt to mount the volume from VMware ESXi as a datastore, the server is unable to mount the path /datastore1. You verify that your existing NFS datastore (/datastore0) on the same NetApp storage system SVMis functioning normally.
Referring to the exhibit, what is preventing the server from mounting the new datastore?
- A. The LIF needs to be at its home-port when the volume is mounted.
- B. The load-sharing mirrors need to be updated.
- C. The volume is too large to be mounted as an NFS datastore
- D. Two volumes cannot be mounted using the same LIF IP address.
Answer: B
NEW QUESTION 75
There are 2 chassis tied to a pair of Fabric Interconnects.
First chassis, chassis-1, has 1 link between single IOM and Fabric Module. Second chassis, chassis-4, has 4 links between single IOM and Fabric Module. Chassis discovery policy is set for 2 links.
Which statement is true?
- A. Chassis-1 will not be added to UCS Domain. Chassis-4 will be added to UCS domain with all 4 links operating after chassis acknowledgement.
- B. Chassis-1 will not be added to UCS Domain. Chassis-4 will be added to UCS domain with all 4 links operating and no additional steps needed.
- C. Both chassis will be added to UCS Domain utilizing all links only after performing chassis acknowledgment.
- D. Both chassis will be added to UCS Domain utilizing all links. No additional steps needed.
Answer: A
NEW QUESTION 76
Which two features allow multiple fabric logins through a single port? (Choose two.)
- A. NPIV
- B. LLDP
- C. NPV
- D. vPC
Answer: A,C
NEW QUESTION 77
A Cisco UCS chasis has two power suppliers connected to one PDU and two power supplies connected to another PDU. You would like to protect against the failure of one entire PDU.
In this scenario, which power policy should you configure in UCS Manager?
- A. N+1
- B. grid
- C. redundant
- D. N+2
Answer: B
NEW QUESTION 78
Which server role is required to support running virtual machines on a Microsoft based hypervisor?
- A. Web Server
- B. Remote Access
- C. Hyper-V
- D. Application Server
Answer: C
NEW QUESTION 79
You run NetApp ConfigAdvisor against you FAS8060A storage system. The report states that the flow control settings for ports e0a on each node are incorrect.
Which set of commands will correct this problem?
- A. network port modify- node netapp-01 port e0a-flowcontrol-admin full network port modify- node netapp-02 port e0a-flowcontrol-admin full
- B. network interface modify- node netapp-01 port e0a-flowcontrol-admin full network interface modify- node netapp-02 port e0a-flowcontrol-admin full
- C. network interface modify- node netapp-01 -port e0a -flowcontrol -admin none network interface modify -node netapp-02 -port e0a -flowcontrol - admin none
- D. network port modify -node netapp-01 -port e0a -flowcontrol-admin none network port modify -node netapp-02 -port e0a -flowcontrol-admin none
Answer: D
NEW QUESTION 80
An administrator has a FlexPod solution using VMware vSphere 6.0. The ESXi hosts use iSCSI for storage connectivity, and all paths have been configured and connected between the NetApp cluster and the ESXi hosts.
Virtual Storage Console has been installed and ESXi host-recommended settings have been applied to all hosts. The active LUN path for one of the iSCSI datastores experiences a connectivity failure and the LUN switches to a new active path.
In this scenario, which event would trigger the ESXi host to switch the active LUN path again?
- A. The ESXi host scans for new VMFS datastores.
- B. The NetApp LIF is reverted to its home port.
- C. The original LUN path comes back online.
- D. The host processes 1,000 I/O operations.
Answer: B
NEW QUESTION 81
A customer with several large Cisco MDS 9718 switches wants to reduce the number of total zones and the number of commands required to add devices, while still adhering to best practices.
In this scenario, which two configurations should be implemented? (Choose two.)
- A. Use the zone copy command to migrate existing zones.
- B. Enable SMART Zoning for new VSANs.
- C. Disable SMART Zoning for new VSANs.
- D. Use the zone convert command to migrate existing zones.
Answer: B,D
NEW QUESTION 82
......
NetApp NS0-176 Exam Topics:
| Section | Objectives |
|---|---|
| FlexPod Troubleshooting | - Demonstrate how to perform FlexPod troubleshooting |
| FlexPod Administration | - Demonstrate knowledge of how to administer FlexPod solutions according to FlexPod best practices - Describe FlexPod management applications - Demonstrate knowledge of how to install and upgrade the FlexPod solution |
NS0-176 Test Engine files, NS0-176 Dumps PDF: https://www.actualtestsquiz.com/NS0-176-test-torrent.html
