Free Jan-2024 NS0-593 Certification Sample Questions certification Exam
Certification Topics of NS0-593 Exam PDF Recently Updated Questions
NEW QUESTION # 24
After a motherboard replacement on a NetApp AFF A300 in a SAN environment, the customer states that
ports 0e and 0f are unable toconnect to the fabric. The ports report "offline".
What would you examine first to troubleshoot the issue?
- A. vserver fcp wwpn-alias show command output
- B. vserver fcp interface show command output
- C. system node hardware unified-connect show command output
- D. storage port show command output
Answer: D
NEW QUESTION # 25 
Referring to the exhibit, what do you need to do to return the MetroCluster to a normal state?
- A. Enter the metrocluster switchback command on Site A.
- B. Enter the metroclustor switchback command on Site B.
- C. Enter the storage failover giveback command on Site B.
- D. Enter the storage failover giveback command on Site A.
Answer: A
NEW QUESTION # 26
You have a 2-node NetApp FAS2750 switchless cluster with twenty-four 1.8 TB disks that is experiencing
performance issues. Upon investigation, you discover severaltype B consistency points.
Referring to the exhibit, which corrective action would address these consistency points?
- A. Add an additional shelf oftwenty-four 1.8 TB disks.
- B. Create additional data LIFs.
- C. Convert the 2-node switchless cluster to a 2-node switched cluster.
- D. Replace the twenty-four 1.8 TB disks with twelve 4 TB disks.
Answer: A
NEW QUESTION # 27
Your customer Informs you about SnapMlrror problems after upgrading NetApp ONTAP software to a newer
version. After investigating the event logs and the SnapMirror history, you see information about delayed
updates of the SnapMirror relationships.
How would your customer prevent such problems in the future?
- A. Quiesce the SnapMirror relationships before upgrading the ONTAP software.
- B. Verify that the cabling of the hardware port that Is responsible for SnapMirror transfers Is correct.
- C. Modify the schedules of the SnapMirror relationships after upgrading the ONTAP software.
- D. Delete the SnapMirror relationships and create them new after upgrading the ONTAP software.
Answer: B
NEW QUESTION # 28
You have a customer who is concerned with high CPU and disk utilization on their SnapMirror destination
system. They are worried about high CPU and disk usage without any user operations.
In this situation, what should you tell the customer?
- A. Suggest that the customer throttle their SnapMirror relationships to reduce resource consumption.
- B. Explain that only user workload should use the CPU and Investigate further.
- C. Suggest that the customer manually cancel any scanners on the destination to reduce CPU usage.
- D. Explain that background tasks such as SnapMirror throttle up in the absence of user workload.
Answer: C
NEW QUESTION # 29
Your customer noticed in NetApp Active IQ that their NetApp Cloud Volumes ONTAP forAzure HA solution
is no longer sending AutoSupport messages over HTTPS. A support ticket has been opened to find out why.
No changes have been made to the Cloud Volumes ONTAP for Azure HA environment.
In this scenario, which two autosupport command parameters should be used to validate that AutoSupport Is
working properly? {Choose two.)
- A. -to
- B. -proxy-url
- C. -mail-hosts
- D. -transport
Answer: B,C
NEW QUESTION # 30
A customer with an FC MetroClusterconfiguration that is running NetApp ONTAP 9.8 software experienced a
site outage and wants to know why the MetroClusler configuration did not switch over to the other site.
What are two reasons for this problem? (Choose two.)
- A. An ISL link was not operating at 16Gbps.
- B. The ISLs were down between the sites.
- C. There was a failed PSU inthe switchover site.
- D. The site had unmirrored aggregates.
Answer: C,D
NEW QUESTION # 31
Your customer has deployed a two petabyte NetAppONTAP FlexGroup volume across their 4-node ONIAP
9.8 cluster. They plan to store over three billion files. They want to prevent file 10 conflicts since files are
placed into the FlexGroup volume.
In this scenario, which two NFS SVM parameters should be enabled? (Choose two.)
- A. -v3-fsid-change
- B. -v4-fsid-change
- C. -v4-64bit-idantifiers
- D. -v3-64bit-identifiers
Answer: A,D
NEW QUESTION # 32
A customer is calling you to troubleshoot why users are unable to connect to their CIFS SVM.
Referring to the Information shown in the exhibit, what Is the source of the problem?
- A. The broken disk in Node03 is the source of the problem.
- B. Thev1db database is offline.
- C. The aggregate aggr2 has a failed disk.
- D. The databases On Node03 must be Switched from secondary to master.
Answer: D
NEW QUESTION # 33
A system panic due to an "L2 watchdog timeout hard reset" error occurred. You have found a FIFO message
in the SP log.
Which FIFO message Is useful for Investigating this Issue?
- A. ONTAP Shutdown BBSP:C=00 L=2F FIFO:
- B. before Reset BBSP:C=00 L=00 FIFO:
- C. BIOS exit BBSP:C=2F L=20 FIFO: 2 C8 C9 C4 24 4 6 18 7 8 11
- D. before NMI BBSP:C=00 L=00 FIFO: F3 F2 F1 F0 5 B2 0 0 0 80 20 E F E3 C0 C2 3 4 6 7 9 9 A
Answer: C
NEW QUESTION # 34
You receive the "Unable to connect to the management gateway server"error when trying to connect to a node
management IP.
In this situation, how do you determine whether core dumps are generated for the mgwd user space process?
- A. Log in to the systemshell and collect core dumps from thesystemshell.
- B. Log in to the clustershell using the node console and collect the core dumps from the clustershell.
- C. Log in to the nodeshell using the node console and collect the core dumps from the nodeshell.
- D. Log in to the service processor and collect the core dumps from the service processor.
Answer: D
NEW QUESTION # 35
You notice poor performance on your FlexGroup and execute the system node run -node * flexgroup show
command for more Information. You notice the "Urge" column has non-zero values.
In this scenario, which statement is true?
- A. The data placement is uneven.
- B. The constituent volumes are completely full.
- C. The constituent volumes are out ofInodes.
- D. The aggregate is completely full.
Answer: D
NEW QUESTION # 36
You have a 4-node NetApp ONTAP 9.8 cluster with an AFF A400 HA pair and a FAS8300 HA pair with 16
TB NL-SAS drives. You are asked to automatically tier 150 TB of Snapshot copy data from the AFF A400
aggregates to the FAS8300.
In this scenario, which ONTAP license must be added to the cluster to accomplish this task?
- A. FabricPool license
- B. S3 license
- C. TPM license
- D. VE license
Answer: C
NEW QUESTION # 37
A storage administrator reports that a monitoring toot is reporting that the storage controller reads between
90% to 93% CPU use. You run the sysstat -m command against thenode in question.
Referring to the exhibit, which statement is correct?
- A. The CPU Is not a first-order monitoring metric for ONTAP.
- B. You should immediately investigate further bygathering perfstat data and opening a support case.
- C. High network exempt use could be a problem.
- D. The customer should be advised to exclude certain workflows to reduce use.
Answer: B
NEW QUESTION # 38
When you review performance data for a NetApp ONTAP cluster node, there are back-to-back (B2B) type
consistency points (CPs) found occurring onthe loot aggregate.
In this scenario, how will performance of the client operations on the data aggregates be affected?
- A. During B2B processing, clients will be unable to read data.
- B. During B2B processing, clients will be unable to write data.
- C. During B2B processing, all I/O to the node is stopped.
- D. Data aggregates will not be affected by B2B processing on another aggregate.
Answer: D
NEW QUESTION # 39
You recently discovered the error message shown below in your ONTAP logs.
What should be your first action to correct this Issue?
- A. Use the storage takeover command on the storage controller that contains my_data_vol.
- B. Use the wafliron command against my_data_vol to solve the inconsistency on the volume.
- C. Determine the root cause behind the inconsistency before attempting any recovery procedure.
- D. Power cycle all the disk storage shelves that contain drives of the aggregate with the my_data_vol
volume.
Answer: D
NEW QUESTION # 40
Which two automation methods does NetApp ONTAP Select support? (Choose two.)
- A. Docker
- B. REST
- C. Anslble
- D. PHP
Answer: B,C
NEW QUESTION # 41
You want to assign storage access to an NVMe protocol host.
Which three objects must beconfigured to accomplish this task? (Choose three.)
- A. an NVMe LIF
- B. the NVMe namespace
- C. an NVMe LUN
- D. the NVMe subsystem
- E. the NVMe broadcast domain
Answer: A,D,E
NEW QUESTION # 42
A customer's storage administrator Informs you about the deactivated Automatic Switchover (AUSO) feature
on their MetroCluster IP environment.
What Information would you tell your customer in this scenario?
- A. The AUSO feature cannot be activated due to a non-mirrored aggregate.
- B. This is a configuration failure, you can activate that feature for the customer.
- C. A faulty link automatically deactivated the AUSO feature.
- D. The AUSO feature is not available in Metrocluster IP installations by design.
Answer: A
NEW QUESTION # 43
Your customer calls you because one application is not able to access a NetApp ONTAP S3 bucket. While
reviewing the EMS log on the cluster, you see the following message:
The same credentials work in another application.
In this scenario, what would cause this problem?
- A. The application is using v4 signatures.
- B. The application is using v2 signatures.
- C. The application is trying to log in as an anonymous user.
- D. The application is trying to access using the HTTP protocol.
Answer: C
NEW QUESTION # 44
A customer calls you to troubleshoot a network issue. The customer wants to create a packet trace for allclients
on the 192.168.9.0/24 subnet.
Referring to the exhibit, on which interface do you have to run the packet trace?
- A. e2a-100
- B. e2a-1092
- C. a0a-322
- D. a0a-456
Answer: B
NEW QUESTION # 45
You ate connecting a Windows Server 2019 hostto ISCSI LUNs on a 4-node AFF A250 cluster running
NetApp ONIAP 9.8 software. The host is unable to connect to the target interface, and the ONTAP event log
has the message shown below.
ISCSI: network interface identifier disabled for use; incoming connection discarded
In this scenario, what is the cause of this connection issue?
- A. iSNS is not enabled on the storage virtual machine.
- B. CHAP isnot configured correctly for the specified initiator.
- C. The iSCSI service is not enabled on the interface.
- D. The WWPN was not added to the initiator group.
Answer: D
NEW QUESTION # 46
Your customer is running a NetApp AFF A800 system with NetAppONTAP 9.8 software and states that their
NS224 shelf is not showing with the correct shelf ID. You analyze the data and the shelf shows an
identification of "1.SHFHUXXXXXXXXXX."
What is the cause of the reported Issue?
- A. The shelf has been power cycled.
- B. The shelf had a disk replaced too quickly.
- C. The shelf was cabled Incorrectly.
- D. A new shelf was added to the controller.
Answer: D
NEW QUESTION # 47
......
2024 New Preparation Guide of Network Appliance NS0-593 Exam: https://www.actualtestsquiz.com/NS0-593-test-torrent.html
NS0-593 Exam Prep Guide: Prep guide for the NS0-593 Exam: https://drive.google.com/open?id=1zSjrnY-7-7lySL8G14ufDtsN5yjzydI9
