[Dec-2021] 500-920 Pre-Exam Practice Tests | Exam Questions and Answers for Cisco Channel Partner Data Center Study Guide
Cisco Data Center Unified Computing Infrastructure Troubleshooting Certification Sample Questions
Cisco 500-920 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION 12
When troubleshooting UCS initialization issues that require Fabric Interconnect reboots, which Fabric Interconnect should be rebooted first?
- A. The Cisco UCS Manager will determine with Fabric Interconnect to reboot
- B. The primary Fabric Interconnect
- C. The subordinate Fabric Interconnect
- D. Both Fabric Interconnects must be rebooted simultaneously
Answer: B
NEW QUESTION 13
What occurs that causes a Split Brain Issue with Fabric Interconnects?
- A. Manage configuration changes made with UCS Manager
- B. The subordinate Fabric Interconnect detects heartbeat failure and declares itself primary
- C. Both cluster links fail
- D. A quorum tie occurs that must be resolved by the SEEPROM
Answer: B
NEW QUESTION 14
Which two statements describes connecting the IO Modules in the UCS chassis to the Fabric interconnects? (Choose two )
- A. Connect Fl-B to the IOM B of each chassis
- B. Connect Fl-A to IOM A and IOM B in each chassis
- C. Connect Fl-B to the IOM A of each chassis
- D. Connect Fl-A to the IOM A of each chassis
- E. Connect Fl-B to IOM A and IOM B in each chassis
- F. Connect Fl-A to the IOM B of each chassis
Answer: A,D,F
NEW QUESTION 15
In order to create an Inband Profile for Cisco Integrated Management Controller (IMC) connectivity, what do you need to perform first?
- A. Create different VLANs, with different VLAN IDs
- B. Create a Management IP Pool, a VLAN. and a VLAN Group
- C. Create a Management IP Pool, a MAC Address Pool, and a VLAN Pool
- D. Create a Service Profile
- E. Create an IPMI Policy
Answer: D
NEW QUESTION 16
Which are two Application Gateways primary roles? (Choose two )
- A. Communicate with virtual machines and report health and state
- B. Manage configuration changes during FSM transitions
- C. Manage configuration changes made with UCS Manager
- D. Communicate with end points and report their health and state
- E. Automate updates to the XML Database
Answer: B,E
NEW QUESTION 17
Which two components are required when the integration of Cisco UCS C-series servers within a Cisco UCS Manager Direct Connect mode? (Choose two )
- A. Compatible Cisco Nexus Fabric Extenders
- B. Compatible UCS VIC adapter installed via the server's PCIe or MLOM slot
- C. Cisco Management Controller
- D. Compatible Cisco UCS Manager version
- E. Compatible UCS 6200 or 6300 Fabric Interconnects
Answer: B,E
NEW QUESTION 18
Which statement is true when using SPAN for Fibre Channel (FC) Traffic?
- A. FC port on Cisco UCS 6238UP can be used as a SPAN source
- B. When defining FC uplink port as the SPAN destination, system will automatically stop using that port as an uplink port
- C. Any port can be used as a SPAN destination port Even if it is defined as Eth uplink port it will be automatically converted to FC uplink port
- D. For FC SPAN sessions we do not have to specifically enable the monitoring session
Answer: A
NEW QUESTION 19
A Hard Drive (HDD) has been hot swapped in a UCS server blade, however, the UCS Manager GUI is not displaying updated metrics about the replacement drive. What action will be required to properly display updated metrics?
- A. Reboot the server.
- B. Reboot the Fabric Interconnects
- C. Remove and re-insert the server blade HDD controller mezzanine card
- D. Use the CLI, since HDD metrics cannot be displayed with the UCS Manager GUI
Answer: C
NEW QUESTION 20
What is the next step after performing a UCS firmware upgrade, and downloading the latest drivers both for your RAID Controller and your Fibre Channel HBA?
Check the HCL
- A. No Drivers are needed in a UCS environment
- B. No need to do anything Drivers are automatically installed for you
- C. Apply the device driver update to the devices
- D. Test device driver compatibility
Answer: D
NEW QUESTION 21
When it comes to pinning vNIC traffic from a UCS Server to the Fabric Interconnect uplink what configuration can you perform?
- A. You can configure Automatic Uplink Pinning. If an uplink interface fails on one Fabric Interconnect the server will fail to the matching uplink on the other Fabric Interconnect
- B. You can configure Static Uplink Pinning. If an uplink interface fails on one Fabric Interconnect the server will fail to the matching uplink on the other Fabric Interconnect
- C. You can configure Static Uplink Pinning. If an uplink interface fails on one Fabric Interconnect, the server will fail to the first available uplink on the other Fabric Interconnect
- D. You can configure Automatic Uplink Pinning. If an uplink interface fails on one Fabric Interconnect, the server will fail to the first available uplink on the other Fabric Interconnect
- E. You can configure Static Uplink Pinning. If an uplink interface fails on one Fabric Interconnect, the server will fail to the first available uplink on the same Fabric Interconnect
Answer: D
NEW QUESTION 22
In a Cisco UCS Manager, if all KVM sessions to each server fail to start, what is likely causing the problem?
- A. The workstation you are using to connect to the KVM session is the problem
- B. The Fabric Interconnect to which you are connected has a problem
- C. The I/O Modules in the chassis are the problem
- D. Cisco UCS Manager has a problem
Answer: A
NEW QUESTION 23
If a Cisco UCS B-Series server fails to initialize, which method of access is required to troubleshoot?
- A. Use Cisco UCS Manager GUI to troubleshoot initialization
- B. Use KVM console to troubleshoot initialization
- C. Use direct console access to troubleshoot initialization
- D. Use Cisco UCS Manager API to troubleshoot initialization
Answer: B
NEW QUESTION 24
Which statement is true regarding the UCS Manager GUI is showing "Overall Status Unassociated" in the General tab for a C-series server?
- A. The server is not properly connected
- B. The server has a service profile assigned, but has connectivity issues with UCS Manager
- C. The server has been properly connected, but has not been discovered by UCS Manager
- D. The server does not have a service profile assigned, but has been discovered by UCS Manager
Answer: A
NEW QUESTION 25
Which statement best describes managing Cisco UCS servers using NX-OS CLI on the Fabric Interconnects?
- A. The NX-OS CLI on the Fabric Interconnects allows you to manage QoS parameters on the Fabric Interconnects and an upstream LAN switch
- B. The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the servers and Fabric Interconnects
- C. The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.
- D. The NX-OS CLI on the Fabric Interconnects allows you to view, but not change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.
Answer: C
NEW QUESTION 26
Which Cisco UCS internal component maintains the UCS XML database, manages the FSM stages and operations and instructs the Application Gateway to perform operations on physical and logical elements?
- A. Cisco Application Gateways
- B. Cisco Data Management Engine
- C. Cisco Finite State Machine
- D. Cisco UCS Manager
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/System-Monitoring/3-1/b_UCSM_GUI_System_Monitoring_Guide_3_1/b_UCSM_GUI_System_Monitoring_Guide_3_1_chapter_0100.html
NEW QUESTION 27
After installing a new UCS M4 server, which two Cisco Integrated Management Controller connectivity options do you have? (Choose two )
- A. In-band Access
- B. Web Access
- C. Out-of-Band Access
- D. XML API Access
- E. SNMP
Answer: A,D
NEW QUESTION 28
......
Cisco Exam Practice Test To Gain Brilliante Result: https://www.actualtestsquiz.com/500-920-test-torrent.html
