[Dec 19, 2021] New Updated NS0-526 Exam Questions 2021
Updated Free Network Appliance NS0-526 Test Engine Questions with 215 Q&As
Network Appliance NS0-526 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION 127
After deploying an ONTAP Select 2 node HA cluster at a remote site, you successfully perform manual takeover and giveback before placing the cluster into production. After the cluster runs in production for a week, you notice that you can no longer perform a manual takeover.
In this scenario, what are two causes of this problem? (Choose two.)
- A. The HA interconnect cables have been removed.
- B. The vSphere HA service has failed.
- C. There is a network disruption between sites.
- D. ONTAP Deploy has been deleted.
Answer: A
NEW QUESTION 128
A storage administrator configured a replication relationship between two volumes on separate clusters. Although the baseline succeeded, the relationship has not been updating. On further investigation, you notice that the administrator did not add an update schedule.
In this situation, what are three ways to solve this problem? (Choose three.)
- A. Use OnCommand System Manager to modify the volume protection relationship.
- B. Use the CLI on the destination cluster to modify the SnapMirror schedule.
- C. Use OnCommand Unified Manager to modify the volume protection relationship.
- D. Use the CLI on the source cluster to modify the SnapMirror schedule.
- E. Execute the ModifySnapMirrorRelationship API method with the dpSchedule field set to ~scheduleName~ on each node ID in the cluster.
Answer: A,B,C
NEW QUESTION 129
You are asked to size an ONTAP disaster recovery and backup cluster. You are required to use 4 x 40 Gb Ethernet ports per controller and 4 x 32 Gb FC ports per controller. You also need to confirm support for Commvault IntelliSnap for NetApp v11.
Inthis scenario, which two tools would confirm these requirements? (Choose two.)
- A. Active IQ
- B. Interoperability Matrix Tool
- C. Hardware Universe
- D. OneCollect
Answer: B,C
NEW QUESTION 130
Click the Exhibit button.
You have data corruption in a volume, and you are asked to restore the data froma SnapVault destination.
Referring to the exhibit, which two actions occur when the volume is restored? (Choose two.)
- A. All files in the volume are restored.
- B. The restore is performed over theintercluster LIFs.
- C. The restore is performed locally.
- D. Only files that have changed in the volume are restored.
Answer: B,D
NEW QUESTION 131
What are two NetApp data protection solutions? (Choose two.)
- A. SnapVault
- B. RecoverPoint
- C. SnapMirror
- D. TimeFinder
Answer: A,C
NEW QUESTION 132
The customer wants to set up a disaster-recovery relationship between the NetApp SolidFire cluster and the NetApp FAS cluster.
Which two statements are true in this scenario? (Choose two.)
- A. SnapMirror on the SolidFire cluster must be enabled.
- B. The volume must not be participating in SolidFire remote replication.
- C. The volumes access type must be set to"Replication Target."
- D. SnapMirror on the SolidFire cluster must be disabled.
Answer: A,C
NEW QUESTION 133
You have downloaded a user-created OnCommand WorkFlow Automation (WFA) content pack from the NetApp communities Web site and want to import it into your environment.
Which two statements are true in this scenario? (Choose two.)
- A. The .obj file can be placed directly in the content folder on the WFA server.
- B. You must unpack the zip file before importing it.
- C. The file must be imported through the WFA Web portal.
- D. The .exe file can be run directly on the WFA server.
Answer: C,D
NEW QUESTION 134
You want to back up a critical Oracle database that resides on a LUN on the NetApp storage system. You decide that a Snapshot copy is the most efficient way to back up thedatabase. You cannot afford to create any down time for the database.
What must you do to ensure that the data in the database is consistent when you create the Snapshot copy?
- A. Have the database administrator issue a checkpoint to the database then use SnapDrive for Unix to take the Snapshot copy of the database LUN.
- B. Use SnapDrive for Unix to take the Snapshot copy of the database LUN.
- C. Disable SnapDrive for Unix then run the backup from SnapManager for Oracle.
- D. Use SnapManager for Oracle to take the Snapshot copy backup.
Answer: B
NEW QUESTION 135
Which two NetApp ONTAP cluster technologies only replicate the changes to WAFL blocks of a volume? (Choose two.)
- A. SnapVault
- B. SnapMirror
- C. Snapshot
- D. NDMP
Answer: A,B
NEW QUESTION 136
A company wants to implement a hybrid cloud backup model for their file services. They want to configure an incremental forever backup that can then push to a public or private cloud.
Which products satisfy this requirement?
- A. System Manager with Cloud Sync and NetApp Volume Encryption
- B. ONTAP with FlexGroup and OnCommand Unified Manager
- C. FlashPool withAltaVault and OnCommand Cloud Manager
- D. SnapMirror with SnapCenter Software and AltaVault
Answer: D
NEW QUESTION 137
Your disaster recovery strategy requires a mirror, an archive, and a tape backup.
Which software would you recommend for this scenario?
- A. OnCommand Workflow Automation
- B. OnCommand System Manager
- C. OnCommand Unified Manager
- D. SnapProtect
Answer: D
NEW QUESTION 138
Which two NetApp technologies allow for synchronous replication of data between two remote sites?
(Choose two.)
- A. SnapVault
- B. SnapMirror
- C. SyncMirror
- D. Metro Cluster
Answer: A,B
NEW QUESTION 139
After deploying an ONTAP Select 2 node HA cluster at a remote site, you successfully perform manual takeover and giveback before placing the cluster into production. After the cluster runs in production for a week, you notice that you can no longer perform a manual takeover.
In this scenario, what are two causes of this problem? (Choose two.)
- A. The HA interconnect cables have been removed.
- B. The vSphere HA service has failed.
- C. There is a network disruption between sites.
- D. ONTAP Deploy has been deleted.
Answer: A,C
NEW QUESTION 140
You wantto break a SnapMirror relationship and use a specific secondary Snapshot copy. In an ONTAP environment, what should you do?
Response:
- A. You must use the following ~snapmirror break~ command option on the cluster shell:~-delete-snapshots <snapshot_name>~.
- B. You can only use the latest Snapshot copy.
- C. You must use the following ~snapmirror break~ command option on the cluster shell:
~-restore-destination-to-snapshot<snapshot_name>~. - D. You must use OnCommand System Manager to perform the SnapMirror break.
Answer: C
NEW QUESTION 141
Your customer wants to replicate data between two NetApp clusters in different data centers. Which two actions must be performed to accomplish this task?
(Choose two.)
- A. Every inter-cluster LIF must be configured on the same port with a data LIF.
- B. One inter-cluster LIF on each node must be configured.
- C. Every controller inboth clusters must have at least one inter-cluster LIF configured.
- D. A peer relationship must be created between the two clusters.
Answer: B,D
NEW QUESTION 142
Management wants the ability totransfer more data over a low bandwidth network connection. Which action would satisfy the request?
- A. Enable network compression with a SnapMirror policy.
- B. Modify the SnapMirror schedules.
- C. Disable throttle with a SnapMirror policy.
- D. Enable version flexible replication with a SnapMirror policy.
Answer: A
NEW QUESTION 143
A client has two regional offices that use SnapMirror cross-site replication to host disaster-recovery mirrors for both offices. A co-worker at one office is requesting read/write access to one of the volume mirrors. You must accomplish this task without interrupting data access or replication.
In this scenario. how should you proceed?
- A. Create a FlexClone volume based on one of the Snapshot copies at the destination so that it is writeable for the co-worker.
- B. Create a FlexVol volume on the destination cluster so that it is writeable for the co-worker.
- C. Modify the export policy on the destination mirror volume so that it is now writeable for the co-worker.
- D. Break the SnapMirror relationship between the local and remote clusters, and make the destination volume writeable for the co-worker.
Answer: A
NEW QUESTION 144
A customer wants tochange a SnapMirror replication schedule to update more frequently. They have 25 GB of data per update to be replicated along a single 1 Gbps Ethernet link.
In this scenario, what is the minimum amount of time required between SnapMirror updates?
- A. 200 minutes
- B. 20 minutes
- C. 5 minutes
- D. 3 minutes
Answer: B
NEW QUESTION 145
......
NetApp NS0-526 Exam Certification Details:
| Number of Questions | 60 |
| Exam Price | $150 USD |
| Exam Code | NS0-526 NCIE-Data Protection Specialist |
| Recommended Training | ONTAP Data Protection Administration (ILT) ONTAP MetroCluster Installation (ILT) ONTAP Data Protection Fundamentals (WBT) |
| Duration | 90 minutes |
| Exam Registration | PEARSON VUE |
| Passing Score | 65% |
| Sample Questions | NetApp NS0-526 Sample Questions |
Try 100% Updated NS0-526 Exam Questions [2021]: https://www.actualtestsquiz.com/NS0-526-test-torrent.html
