Cisco 350-801 Cert Guide PDF 100% Cover Real Exam Questions
Pass 350-801 Exam - Real Questions and Answers
Cisco 350-801 exam is designed for candidates who want to showcase their proficiency in implementing and operating Cisco Collaboration Core Technologies. 350-801 exam is part of the certification process for the CCNP Collaboration and CCIE Collaboration certifications. The test aims to assess the candidates' knowledge and skills in implementing Cisco Unified Communications Manager, Cisco Unity Connection, Cisco Unified IM and Presence, and Cisco Expressway solutions.
NEW QUESTION # 179
Refer to the exhibit.
When making a call to a MRA client, what are the combinations of protocol on each of the different sections A-B-C?
- A. IP TCP/TLS(A) +SIP TCP/TLS (B) +TLS (C)
- B. SIP TLS (A) +SIP TLS (B) +SIP TLS (C)
- C. SIP TCP/TLS (A) + SIP TLS (B) + SIP TLS (C)
- D. SIP TCP/TLS +SIP TCP/TLS (B) + SIP TCP/TLS (C)
Answer: C
NEW QUESTION # 180
A collaboration engineer troubleshoots issues with a Cisco IP Phone 7800 Series The IPv4 address of the phone is reachable via ICMP and HTTP and the phone is registered to Cisco UCM However, the engineer cannot reach the CLI of the phone Which two actions in Cisco UCM resolve the issue? (Choose two)
- A. Disable Web Access under Product Specific Configuration Layout in Cisco UCM
- B. Enable SSH Access under Product Specific Configuration Layout in Cisco UCM
- C. Set a username and password under Secure Shell Information in Cisco UCM
- D. Enable FIPS Mode under Product Specific Configuration Layout in Cisco UCM
- E. Enable Settings Access under Product Specific Configuration Layout in Cisco UCM.
Answer: A,B
NEW QUESTION # 181
An engineer roust configure DTMF relay on a Cisco Unified Border Element by using RFC2833 as the preferred relay mechanism and KPML as the next preferred relay mechanism. The engineer logs in to the CUBE and enters the dial-peer configuration level. Which command should be run at dial-peer configuration level?
- A. dtmf-relay sip-kvmi rtp-nte
- B. dtmf- relay rtp-nte sip-kpml
- C. dtmf-relay rtp-inband sip-kvmi
- D. dtmf-relay sip-kgml rtp-inband
Answer: B
Explanation:
The dtmf-relay command is used to configure DTMF relay on a Cisco Unified Border Element. The rtp-nte option specifies that RFC2833 is the preferred relay mechanism, and the sip-kpml option specifies that KPML is the next preferred relay mechanism.
NEW QUESTION # 182
Which protocol does Cisco Prime Collaboration Assurance use to poll the health status of different systems in the Collaboration environment?
- A. SCCP
- B. SIP
- C. SMTP
- D. SNMP
Answer: D
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-collaboration/ guide-c07-736946.html#_Toc446633083
NEW QUESTION # 183
What is the difference between Cisco Unified Border Element and a conventional Session Border Controller?
- A. Voice policy
- B. SIP security
- C. Address hiding
- D. DTMF interworking
Answer: A
NEW QUESTION # 184
When setting a new primary DNS server in the Cisco UCM CLI what is required for the change to take affect?
- A. restart of CallManager service
- B. restart of the network service
- C. restart of TFTP service
- D. restart of DirSync service
Answer: B
Explanation:
You don't have to restart the call manager service. Actually according to this guide (read at the bottom) you don't have to restart anything, it restarts network services for you.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_5_1SU1/adminGd/cucm_ b_administration-guide-1251SU1/cucm_b_test-adminguide_chapter_011110.html
NEW QUESTION # 185
What are two functions of Cisco Expressway in the Collaboration Edge? (Choose two)
- A. Expressway-E provides a VPN entry point for Cisco IP phones with a Cisco AnyConnect client using authentication based on certificates.
- B. Expressway-C provides encryption for Mobile and Remote Access but not for business-to-business communications.
- C. The Expressway-C and Expressway-E pair can interconnect H 323-to-SIP calls for voice.
- D. Expressway-E provides a perimeter network that separates the enterprise network from the Internet.
- E. The Expressway-C and Expressway-E pair can enable connectivity from the corporate network to the PSTN via a T1/E1 trunk.
Answer: B,C
NEW QUESTION # 186
An administrator needs to stop the leading 9 from outbound calls on an IOS Voice Gateway and ensure that the system handles 911 emergency calls Which configuration is needed to accomplish this task?
A)
B)
C)
D)
- A. Exhibit A
- B. Exhibit C
- C. Exhibit B
- D. Exhibit D
Answer: C
NEW QUESTION # 187
Refer to the exhibit.
Refer to the exhibit. A collaboration engineer adds a redundant NTP server to an existing Cisco Collaboration solution On the Cisco UCM OS Administration page, the new NTP server shows as "Not Accessible" Which action resolves this issue?
- A. Configure the "reach" value as "377" for the new NTP server.
- B. Restart NTPD on the Cisco UCM server.
- C. Start the NTP service on the new NTP server
- D. Delete and re-add the new NTP server via the Cisco UCM command-line interface
Answer: C
NEW QUESTION # 188
Refer to the exhibit.
Refer to the exhibit. An administrator must fix the SRV records to ensure that server1. sample.com is always contacted first from the three servers. Which solution should the engineer apply to resolve this issue?
- A. Priority = 10, Weight = 10
- B. Priority = 100, Weight = 90
- C. Priority = 10, Weight = 5
- D. Priority = 5, Weight = 70
Answer: D
NEW QUESTION # 189
Due to provider requirements, outgoing calls from the Enterprise to the PSTN must start with channel 1. Which ISDN command changes the channel selection on IOS to meet this requirement?
- A. isdn protocol-emulate network
- B. isdn incoming-voice
- C. isdn bchan-number-order ascending
- D. isdn bchan-number-order decending
Answer: C
NEW QUESTION # 190
Refer to the exhibit. An administrator configures fax dial-peers on a Cisco IOS gateway and finds that faxes are not working correctly Which change should be made to resolve this issue?
- A. codec g726r32
- B. codec g711ulaw
- C. codec g723ar63
- D. codec g729br81
Answer: B
NEW QUESTION # 191
Refer to the exhibit.
A Cisco UCM user with directory number 4401 dials 5507. and the call is routed to a Cisco Unified Border Element. Which IP address will the call be sent to?
- A. 10.0.0.2
- B. 10.0.0.1
- C. 10.0.0.4
- D. 10.0.0.3
Answer: A
NEW QUESTION # 192
Which type of input is required when configuring a third-party SIP phone?
- A. serial number
- B. authorization code
- C. digest user
- D. manufacturer
Answer: C
NEW QUESTION # 193
Which configuration tells a switch port to send Cisco Discovery protocol packets that configure an attached Cisco IP phone to trust tagged traffic that is received from a device that is connected to the access port on the Cisco IP phone?
- A. Router# configure terminal
Router(config)# interface gigabitethernet 5/1
Router(config-if)# platform qos trust extend cos 3 - B. Router# configure terminal
Router(config)# interface gigabitethernet 5/1
Router(config-if)# platform qos extend trust - C. Router# configure terminal
Router(config)# interface gigabitethernet 5/1
Router(config-if)# platform qos trust extend - D. Router# configure terminal
Router(config)# interface gigabitethernet 5/1
Router(config-if)# platform qos trust extend cos 5
Answer: C
NEW QUESTION # 194
An employee of company ABC just quit. The IT administrator deleted the employee's userid from the active directory at 10 a m. on March 4th The nightly sync occurs at 10 p.m daily. The IT administrator wants to troubleshoot and find a way to delete the userid as soon as possible How is this issue resolved?
- A. Wait until 3:15 a.m. on March 6th for garbage collection to remove the user from Cisco UCM.
- B. Wait until 3:15 a.m. on March 5th for garbage collection to remove the user from Cisco UCM
- C. Wait until 10 pm on March 5th when the user is automatically removed from Cisco UCM.
- D. Wait until 10 pm on March 4th when the user is automatically removed from Cisco UCM
Answer: A
NEW QUESTION # 195
Refer to the exhibit. Which action must an engineer take to implement self-provisioning on a primary communications manager server?
- A. Uncheck the auto-registration Disabled checkbox.
- B. Change the SIP Phone Secure Port.
- C. Select a different Universal Device Template.
- D. Select a different Universal Line Template.
Answer: A
NEW QUESTION # 196
What is the element of Cisco collaboration infrastructure that allows Jabber clients outside of the network to register in Cisco Unified communications Manager and use its resources?
- A. Cisco prime collaboration provisioning server
- B. Cisco Expressway
- C. Cisco IM and Presence node
- D. Cisco Unified Border Element
Answer: B
Explanation:
Cisco Unified Communications Mobile and Remote Access (MRA) is part of the Cisco Collaboration Edge Architecture. It allows endpoints such as Cisco Jabber to have their registration, call control, provisioning, messaging and presence services provided by Cisco Unified Communications Manager (Unified CM) when the endpoint is outside the enterprise network. The Expressway provides secure firewall traversal and line-side support for Unified CM registrations.
NEW QUESTION # 197
......
100% Free 350-801 Daily Practice Exam With 390 Questions: https://www.actualtestsquiz.com/350-801-test-torrent.html
Pass 350-801 Review Guide, Reliable 350-801 Test Engine: https://drive.google.com/open?id=1PVPvFI6xAvZ6xW75cAtNk_xZ076usL7c
