[Aug 19, 2024] Pass Cisco 500-220 Exam Info and Free Practice Test
500-220 Exam Dumps PDF Updated Dump from ActualTestsQuiz Guaranteed Success
Cisco 500-220 certification exam is an excellent opportunity for networking professionals to demonstrate their expertise in engineering Cisco Meraki solutions. Engineering Cisco Meraki Solutions certification exam is comprehensive and designed to test the candidate's knowledge of Cisco Meraki products and solutions. Passing 500-220 exam can help networking professionals advance their careers and become recognized experts in this area.
NEW QUESTION # 41
Which API endpoint clones a new Organization?
- A. POST /organizations/clone/{organizationId}
- B. POST /organizations/{organizationId}/clone
- C. PUT /organizations/{organizationId}/clone
- D. POST /organizations/{organizationId}/new
Answer: D
NEW QUESTION # 42
What are two roles of the network and device tags in a Dashboard? (Choose two.)
- A. Device tags can be used to simplify the assignment of device-level permissions in an Organization with many administrators.
- B. Network tags can be used to assign networks to separate Auto VPN domains in an Organization with many networks.
- C. Device tags can be assigned to MR APs to influence the gateway selection for repeaters in a mesh wireless network.
- D. Network tags can be used to simplify the assignment of network-level permissions in an Organization with many networks.
- E. Tags enable administrators to configure a combination of network and device specific tags to create summary reports filtered for specific devices across multiple networks.
Answer: C,E
Explanation:
Reference:
Organization_Menu/Manage_Tags
NEW QUESTION # 43
Which two actions can extend the video retention of a Cisco Meraki MV Smart Camera? (Choose two.)
- A. configuring a recording schedule
- B. enabling motion-based retention
- C. installing an SSD memory extension
- D. enabling audio compression
- E. enabling maximum retention limit
Answer: A,B
Explanation:
Explanation
https://documentation.meraki.com/MV/Advanced_Configuration/Scheduled_Recording By default, the Meraki security camera's will record continuously 24/7. In some situations, certain times of day are not allowed to be recorded. Scheduled recording covers this requirement as well as improve the video retention capabilities of the camera.
NEW QUESTION # 44
What are two roles of the network and device tags in a Dashboard? (Choose two.)
- A. Network tags can be used to simplify the assignment of network-level permissions in an Organization with many networks.
- B. Device tags can be used to simplify the assignment of device-level permissions in an Organization with many administrators.
- C. Network tags can be used to assign networks to separate Auto VPN domains in an Organization with many networks.
- D. Tags enable administrators to configure a combination of network and device specific tags to create summary reports filtered for specific devices across multiple networks.
- E. Device tags can be assigned to MR APs to influence the gateway selection for repeaters in a mesh wireless network.
Answer: A,D
Explanation:
Explanation
See Permissions by Network Tag section To simplify the assignment of network-level permissions in an organization with many networks, permissions can be granted to users for a given network tag.
https://documentation.meraki.com/General_Administration/Managing_Dashboard_Access/Managing_Dashboard The Organization > Configure > Manage Tags page allows Administrators to configure a combination of Network and Device specific tags to create Summary Reports filtered for specific devices across multiple networks.
https://documentation.meraki.com/General_Administration/Organizations_and_Networks/Organization_Menu/M
NEW QUESTION # 45
Company iPads are enrolled in Systems Manager without supervision, and profiles are pushed through Systems Manager.
Which outcome occurs when a user attempts to remove the "Meraki Management" profile on an iPad?
- A. The "Meraki Management" profile is removed. All the profiles Systems Manager pushed remain.
- B. The "Meraki Management" profile is removed and then pushed automatically by Systems Manager.
- C. The "Meraki Management" profile is removed. All the profiles that Systems Manager pushed are also removed.
- D. The "Meraki Management" profile cannot be removed.
Answer: C
Explanation:
Explanation
On the device, navigate to Settings > General > Device Management
Select Meraki Management, and select Remove to delete the management profile and any managed configuration profiles installed via SM
NEW QUESTION # 46
Which two primary metrics does Meraki Insight use to calculate the Application Performance Score? (Choose two.)
- A. Per-flow Goodput
- B. Total Bandwidth Usage
- C. Maximum Jitter
- D. Maximum Latency
- E. Application Response Time
Answer: A,E
NEW QUESTION # 47
Company iPads are enrolled in Systems Manager without supervision, and profiles are pushed through Systems Manager.
Which outcome occurs when a user attempts to remove the "Meraki Management" profile on an iPad?
- A. The "Meraki Management" profile is removed. All the profiles Systems Manager pushed remain.
- B. The "Meraki Management" profile is removed and then pushed automatically by Systems Manager.
- C. The "Meraki Management" profile is removed. All the profiles that Systems Manager pushed are also removed.
- D. The "Meraki Management" profile cannot be removed.
Answer: C
NEW QUESTION # 48
Which three verbs of request are available in the Cisco Meraki API? (Choose three.)
- A. POST
- B. PATCH
- C. ADD
- D. GET
- E. PUT
- F. SET
Answer: A,D,E
Explanation:
Reference:
Cisco_Meraki_Dashboard_API
NEW QUESTION # 49
What is a feature of distributed Layer 3 roaming?
- A. An MX Security Appliance is required as a concentrator.
- B. All wireless client traffic is tunneled.
- C. An MX Security Appliance is not required as a concentrator.
- D. All wireless client traffic can be split-tunneled.
Answer: C
Explanation:
Explanation
https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best This is a feature of distributed Layer 3 roaming, which maintains layer 3 connections for end devices as they roam across layer 3 boundaries without a concentrator1. The first access point that a device connects to will become the anchor access point1.
NEW QUESTION # 50
Refer to the exhibit.
What are two outcomes reflected in the Web App Health application? (Choose two.)
- A. Network #2 could not load Google because of a local client misconfiguration.
- B. Users on both networks may be experiencing issues when attempting to reach Google.
- C. Network #1 could not load Google because of a remote server issue.
- D. Network #2 had better application performance than Network #1.
- E. Neither network recorded any server-side performance issues.
Answer: B,E
NEW QUESTION # 51
A customer requires a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and 50 remote sites with a single uplink connection.
How many tunnels does each hub need to support?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Explanation
https://documentation.meraki.com/Architectures_and_Best_Practices/Auto_VPN_Hub_Deployment_Recommen This is the number of tunnels that each hub needs to support in a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and 50 remote sites with a single uplink connection. This can be calculated by using the formula for the hub tunnel count in a hub-and-spoke topology1:
Hub Tunnel Count = (H x (H - 1) / 2 x L1) + (H x S x L1 x L2)
Where H is the number of hubs, S is the number of spokes, L1 is the number of uplinks for the hubs, and L2 is the number of uplinks for the spokes. In this case, H = 2, S = 50, L1 = 2, and L2 = 1. Therefore, Hub Tunnel Count = (2 x (2 - 1) / 2 x 2) + (2 x 50 x 2 x 1) Hub Tunnel Count = (2 x 1 / 2 x 2) + (200 x 2) Hub Tunnel Count = (2 / 2 x 2) + (400) Hub Tunnel Count = (1 x 2) + (400) Hub Tunnel Count = 2 + 400 Hub Tunnel Count = 402 This question is related to the topic of Auto VPN Hub Deployment Recommendations in the Cisco Meraki documentation. You can find more information about this topic in the Auto VPN Hub Deployment Recommendations article or the Meraki Auto VPN General Best Practices page.
NEW QUESTION # 52
Drag and drop the settings from the left into the boxes on the right to indicate if the setting will be cloned or not cloned using the Cisco Meraki MS switch cloning feature.
Answer:
Explanation:
Explanation
The settings that will be cloned using the Cisco Meraki MS switch cloning feature are:
port name
interface type
STP bridge property
The settings that will not be cloned using the Cisco Meraki MS switch cloning feature are:
switch management IP
switch name
NEW QUESTION # 53
Refer to the exhibit.
What are the Loss and Average Latency statistics based on?
- A. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page
- B. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD- WAN > Firewall page
- C. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping page
- D. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
Answer: B
NEW QUESTION # 54
Refer to the exhibit.
For an AP that displays this alert, which network access control method must be in use?
- A. WPA2-enterprise with my RADIUS server
- B. splash page with my RADIUS server
- C. preshared key
- D. MAC-based access control with RADIUS server
Answer: A
Explanation:
Explanation
This is because the alert mentions 802.1X failure, which is a network access control method that is used with WPA2-enterprise and RADIUS servers1.
This question is related to the topic of Wireless Access Points Quick Start in the Cisco Meraki documentation.
You can find more information about this topic in the Wireless Access Points Quick Start article or the Using the Cisco Meraki Device Local Status Page page.
NEW QUESTION # 55
Drag and drop the steps from the left into the sequence on the right to manage device control, according to Cisco Meraki best practice.
Answer:
Explanation:
Explanation
Table Description automatically generated with medium confidence
NEW QUESTION # 56
Drag and drop the settings from the left onto the OS system or systems that support it on the right Settings can be used more than once.
Answer:
Explanation:
Explanation
IOS:
Kiosk mode
Single App mode
Wallpaper
Cisco Security Connector
Active Sync
Android:
Kiosk mode
Backpack
Wallpaper
Active Sync
This question is related to the topic of in the Cisco Meraki documentation.
You can find more information about this topic in the [System Manager: Getting Started] article or the
[System Manager Overview] page.
https://documentation.meraki.com/SM/Profiles_and_Settings/Configuration_Settings_Payloads
NEW QUESTION # 57
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
- A. Peers contact the VPN registry at TCP port 9350.
- B. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
- C. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
- D. Peers contact the VPN registry at UDP port 9350.
- E. For IPsec tunneling, peers use UDP ports 500 and 4500.
Answer: C,D
Explanation:
Reference:
_Configuration_and_Troubleshooting
NEW QUESTION # 58
Refer to the exhibit.
A packet arrives on the VPN concentrator with source IP 10.168.70.3 and destined for IP 10.116.32.4.
What is the next hop for the packet, based on this concentrator routing table?
- A. The Auto VPN peer "Store 1532 - appliance" is the next hop.
- B. The packet is stopped.
- C. The concentrator gateway (10.128.124.62) is the next hop.
- D. Not enough detail is available to determine the next hop.
Answer: D
NEW QUESTION # 59
What is the default frequency of SD-WAN probes sent between VPN peers in a Cisco Meraki MX SD-WAN deployment?
- A. 10 seconds
- B. 100 milliseconds
- C. 1 second
- D. 10 milliseconds
Answer: C
Explanation:
Explanation
https://www.ciscolive.com/c/dam/r/ciscolive/latam/docs/2019/pdf/BRKCRS-1579.pdf
NEW QUESTION # 60
Which Cisco Meraki best practice method preserves complete historical network event logs?
- A. Configuring Dashboard logging to preserve only certain event types.
- B. Configuring the preserved event number to maximize logging.
- C. Configuring the preserved event period to unlimited.
- D. Configuring a syslog server for the network.
Answer: B
NEW QUESTION # 61
Refer to the exhibit.
This Dashboard organization uses Co-Termination licensing model.
What happens when an additional seven APs are claimed on this network without adding licenses?
- A. All APs immediately stop functioning.
- B. All network devices stop functioning in 30 days.
- C. One AP Immediately stops functioning.
- D. All APs stop functioning in 30 days.
Answer: B
NEW QUESTION # 62
Drag and drop the descriptions from the left onto the corresponding MX operation mode on the right.
Answer:
Explanation:
Explanation
Routed Mode:
This mode is the default mode of operation
This mode is generally also the default gateway for devices on the LAN
Client traffic to the internet has the source IP rewritten to match the WAN IP of the appliance DHCP services can be configured on the MX appliance Passthrough Mode:
The MX appliance acts as a layer 2 bridge
VLANs cannot be configured
No address translation is provided
This mode is not recommended at the network perimeter
This question is related to the topic of MX Addressing and VLANs in the Cisco Meraki documentation. You can find more information about this topic in the MX Addressing and VLANs article or the General MX Best Practices page.
NEW QUESTION # 63
......
Pass Your Cisco Exam with 500-220 Exam Dumps: https://www.actualtestsquiz.com/500-220-test-torrent.html
500-220 Exam Dumps - Cisco Practice Test Questions: https://drive.google.com/open?id=12N_OVeQN-_6CgrvZ-YzWYNN6aeJwiW_P
