2024 D-VXR-DY-01 Dumps PDF - D-VXR-DY-01 Real Exam Questions Answers
Valid D-VXR-DY-01 Test Answers & EMC D-VXR-DY-01 Exam PDF
NEW QUESTION # 14
An implementation engineer is deploying a new VxRail cluster.
What should they confirm before installing the hardware?
- A. Redundant power zones exist with adequate power cables
- B. At least 24 in (61 cm) of clearance must exist in front of and behind the cabinet
- C. Power distribution supports only the power rating of a single node
- D. Service laptop is on the same IP network as the iDRACs
Answer: B
NEW QUESTION # 15
What is required to enable vSAN encryption on a VxRail cluster?
- A. Internal vCenter Server
External Key Management Server - B. Internal vCenter Server
Internal Key Management Server - C. External vCenter Server
External Key Management Server - D. All-Flash system
External Key Management Server
Answer: C
NEW QUESTION # 16
Which service determines the primary node after powering on the VxRail nodes during the deployment of a VxRail cluster?
- A. Election
- B. Marvin
- C. Loudmouth
- D. Mystic
Answer: A
NEW QUESTION # 17
Which model of VxRail node supports the lowest number of disk groups?
- A. G Series
- B. P Series
- C. S Series
- D. E Series
Answer: A
NEW QUESTION # 18
Which VxRail model requires iDRAC to be configured to LOM1?
- A. V
- B. G
- C. D
- D. S
Answer: B
NEW QUESTION # 19
Which VxRail configurations can be reviewed using the As-Built Configuration Report at the time the report is generated?
- A. vMotion interface IP addresses, vCenter users and passwords, and opened firewall ports
- B. Node PSNT numbers, license activation dates, and Private Management Network VLAN ID
- C. Node names, vSAN interface IP addresses, and VxRail Manager users and passwords
- D. Node models, license keys, vSAN VLAN ID, and vMotion VLAN ID
Answer: D
NEW QUESTION # 20
How can an administrator limit IPv6 traffic created by VxRail nodes?
- A. Create a unique VLAN for IPv6 traffic
- B. Configure Link Aggregation
- C. Enable MLD snooping and querier
- D. Tag VLAN 3939 on the ToR switches
Answer: C
NEW QUESTION # 21
What is a consideration when performing a VxRail software upgrade from version 4.7.xxx to version 7.0.xxx?
- A. External vCenter server must be upgraded after the VxRail is upgraded
- B. vCenter Server requires a temporary IP address on a different subnet before the upgrade
- C. VxRail Manager VM must be changed to the default name to avoid an upgrade failure
- D. Secure boot must be enabled on the ESXi hosts for a successful upgrade
Answer: B
NEW QUESTION # 22
Where can an administrator find steps to perform a manual verification of the customer network?
- A. Customer Simplified Form
- B. Dell EMC VxRail Network Planning Guide
- C. Pre-Engagement Questionnaire (PEQ)
- D. Dell Technologies SolVe Online
Answer: D
NEW QUESTION # 23
A customer is performing self-deploy of a VxRail cluster. The VxRail Deployment Wizard fails to launch. The software appears to be corrupted.
What should they do to address the issue?
- A. Use the vSphere Client and troubleshoot the issue.
- B. Use the VMware Host Client and iDRAC to access the nodes and troubleshoot the issue.
- C. Verify that the Configuration file is not corrupt and has all the required values.
- D. Contact Dell support and request the nodes be reimaged.
Answer: D
NEW QUESTION # 24
You are asked to cable up a VxRail G Series cluster to a redundant pair of 1/10G switches.
What is the cabling best practice for this configuration?
- A. Cable ports 1 and 2 to one switch. Cable ports 3 and 4 to the other switch. Cable BMC from node 1 and 2 to one switch. Cable BMC from node 3 and 4 to the other switch.
- B. Cable ports 1 and 3 to one switch. Cable ports 2 and 4 to the other switch.
- C. Cable ports 1 and 2 to one switch. Cable ports 3 and 4 to the other switch.
- D. Cable ports 1 and 3 to one switch. Cable ports 2 and 4 to the other switch. Cable BMC from node 1 and 3 to one switch. Cable BMC from node 2 and 4 to the
Answer: D
NEW QUESTION # 25
What is validated by running the Proactive VM Creation test in vCenter on a VxRail cluster?
- A. vSAN operates successfully
- B. Network performance is sufficient
- C. Network firewalls are configured correctly
- D. vSAN has sufficient storage capacity
Answer: A
NEW QUESTION # 26
When installing VxRail hardware and configuring iDRAC settings, which methods can be used per SolVe documentation?
- A. Using System Setup during Post
Micro USB Direct connection to node - B. Using Lifecycle controller interface
DB9 to USB cable to configure - C. Press F10 on post, use System setup
Use Lifecycle controller interface - D. Press F2 on post, use System setup
DB9 to USB cable to configure
Answer: A
NEW QUESTION # 27
A VxRail cluster is being deployed with an external vCenter Server.
What role needs to be assigned to the new VxRail Management User account within vCenter?
- A. No specific role
- B. Administrator
- C. Trusted Infrastructure Administrator
- D. Read-only
Answer: A
NEW QUESTION # 28
You are performing a troubleshooting steps on a 4 node VxRail cluster. The cluster uses Erasure Coding for all VMs. When you attempt to put a node into maintenance modeusing the recommended vSAN data migration policy, the operation fails.
What could be done to successfully put the node into maintenance mode?
- A. Storage vMotion the VMs off the node
- B. Use the 'No Data Migration' option
- C. Use the 'Full Data Migration' option
- D. Cold migrate the VMs off the node
Answer: C
NEW QUESTION # 29
From what location should NVT for VxRail be run?
- A. VxRail network Top of Rack switch
- B. Workstation on the same network as VxRail Manager
- C. Laptop connected to the first VxRail ESXi node
- D. Jump server on a different network
Answer: B
NEW QUESTION # 30
An implementation engineer is attempting to add a new node to a 3 node VxRail cluster.
What is the minimum VxRail code version that no longer requires the fourth node to match the first three nodes?
- A. 4.5.150
- B. 4.5.070
- C. 4.0.302
- D. 4.0.502
Answer: A
NEW QUESTION # 31
What should you use to create the customer deliverable documentation of a VxRail deployment?
- A. SolVe Online
- B. As-Built Configuration Generator
- C. E-Lab Advisor
- D. VxRail Manager
Answer: B
NEW QUESTION # 32
What is the maximum number of nodes supported in a standard VxRail Appliance configuration?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 33
When validating the completed VxRail PEQ, you note the following VLANs in the configuration:\
- VxRailManagement - VLAN 120
- vSAN - VLAN 121
- vMotion - VLAN 122
- Servers - VLAN 204
- NetManagement - VLAN 208
Which command should you use to validate that the VLANs are configured on each Dell EMC ToR switch?
- A. show vlan
- B. show interfaces port-channel brief
- C. show running-config spanning-tree
- D. show interfaces status
Answer: A
NEW QUESTION # 34
What is a Dell EMC converged platform product?
- A. VxRack
- B. VxRail
- C. Vblock/VxBlock
- D. Vscale Architecture
Answer: C
NEW QUESTION # 35
Which functionality is provided by the VxRail Physical View for a node?
- A. Hardware alerts, BIOS and firmware versions, and initiating disk replacement
- B. Hardware alerts, LED indicator activation, and initiating power supply replacement
- C. LED indicator activation, initiating disk replacement, and BIOS parameter change
- D. BIOS and firmware versions, cluster shutdown, and initiating BIOS and firmware update
Answer: A
NEW QUESTION # 36
......
D-VXR-DY-01 Exam Dumps - PDF Questions and Testing Engine: https://www.actualtestsquiz.com/D-VXR-DY-01-test-torrent.html
