[Q42-Q60] Pass D-VXR-DS-00 Exam in First Attempt Guaranteed 100% Cover Real Exam Questions [Sep-2025]

Share

Pass D-VXR-DS-00 Exam in First Attempt Guaranteed 100% Cover Real Exam Questions [Sep-2025]

Valid D-VXR-DS-00 test answers & EMC D-VXR-DS-00 exam pdf

NEW QUESTION # 42
What is the recommended network configuration for a VxRail Dynamic Node cluster?
Response:

  • A. Dedicated storage VLANs
  • B. High-speed Ethernet with multiple uplinks
  • C. Fibre Channel connectivity for storage
  • D. Dual-switch network topology

Answer: B


NEW QUESTION # 43
What is the role of vCenter Server in a VxRail deployment?
Response:

  • A. It acts as a storage controller for vSAN.
  • B. It enables deduplication and compression across nodes.
  • C. It provides cluster-level management for VxRail nodes.
  • D. It ensures fault tolerance through witness nodes.

Answer: C


NEW QUESTION # 44
During cluster creation in VxRail Manager, which parameter must be specified for networking?
Response:

  • A. Storage pool capacity
  • B. vSAN RAID level
  • C. Management VLAN ID
  • D. Witness host IP

Answer: C


NEW QUESTION # 45
An architect is designing a VxRail solution for a customer who needs vCenter HA.
Which vCenter Server platform options supports this requirement?

  • A. Use an existing Customer-supplied vCenter server
  • B. Use a new VxRail-managed vCenter server
  • C. Use an existing VxRail-managed vCenter server
  • D. Use an existing Customer-supplied vCenter server

Answer: B

Explanation:
Only a new VxRail-managed vCenter Server platform supports the built-in vCenter HA capability required for high availability in VxRail environments.


NEW QUESTION # 46
Which VxRail node features should be evaluated for workload optimization?
(Choose two)
Response:

  • A. Disk group configuration
  • B. CPU and memory capacity
  • C. Preloaded operating system
  • D. Physical size of the node

Answer: A,B


NEW QUESTION # 47
Which feature of VxRail helps in identifying new nodes during the discovery process?
Response:

  • A. vSphere High Availability
  • B. Host Configuration Wizard
  • C. Node Auto-Discovery Service
  • D. Distributed Resource Scheduler

Answer: C


NEW QUESTION # 48
An IT architect is designing the deployment of many VxRail 2-node clusters. The architect is planning to use a single shared witness, appliance for multiple 2-node clusters.
What is the maximum number of VxRail 2-node clusters supported by a single Shared Witness Appliance?

  • A. 0
  • B. 1
  • C. 2

Answer: A

Explanation:
A single Shared Witness Appliance can support up to 64 VxRail 2-node clusters, enabling efficient management and resource consolidation in multi-cluster deployments.


NEW QUESTION # 49
Which VxRail deployment feature improves storage efficiency for large workloads?
Response:

  • A. Deduplication and compression
  • B. Node replication
  • C. Multipath I/O
  • D. RAID 5 protection

Answer: A


NEW QUESTION # 50
Which networking requirement is critical for ensuring fault tolerance in a VxRail cluster?
Response:

  • A. Static IP configuration
  • B. Redundant network switches
  • C. Separate VLANs for management and workload traffic
  • D. Single high-speed NIC per node

Answer: B


NEW QUESTION # 51
During the creation of a VxRail project, which components are critical for initial setup?
(Choose two)
Response:

  • A. Static IP addresses for cluster nodes
  • B. Witness node for 2-node clusters
  • C. Backup schedule configuration
  • D. Management VLAN configuration

Answer: A,D


NEW QUESTION # 52
Which method can be used to discover VxRail nodes during deployment?
Response:

  • A. Bootstrapping
  • B. Node Auto-Discovery
  • C. Distributed Resource Discovery
  • D. IP Address Management

Answer: B


NEW QUESTION # 53
Which steps are involved in reviewing a completed VxRail configuration?
(Choose two)
Response:

  • A. Validate network connectivity
  • B. Apply firmware updates to nodes
  • C. Confirm cluster node placement
  • D. Verify IP address assignments

Answer: A,D


NEW QUESTION # 54
Which consideration is unique to vSAN ESA design in VxRail clusters?
Response:

  • A. Witness host deployment
  • B. VLAN segregation
  • C. Fault domain configuration
  • D. All-flash storage support

Answer: D


NEW QUESTION # 55
What is a primary advantage of using stretch clusters in VxRail?
Response:

  • A. Faster deduplication processes
  • B. Enhanced security for data in transit
  • C. Continuous data availability across sites
  • D. Higher storage efficiency

Answer: C


NEW QUESTION # 56
What are the benefits of using the VxRail design process?
(Choose two)
Response:

  • A. Optimized node performance
  • B. Reduced physical rack space requirements
  • C. Improved fault tolerance
  • D. Predictable deployment timelines

Answer: C,D


NEW QUESTION # 57
An architect must deploy the Live Optics tool to gather information from an existing customer environment.
What is the correct way to begin this process?

  • A. Sign up on the Live Optics website, download the collector, and deploy it on a suitable workstation or server
  • B. Sign up on the Live Optics website and connect to the public IP address of your VMware vCenter Server
  • C. Sign up on the Live Optics website, download the collector, and install it into the VMware vCenter Server

Answer: A

Explanation:
The correct process is to sign up on the Live Optics website, download the collector, and deploy it on a suitable workstation or server in the environment to gather data without impacting the vCenter Server directly.


NEW QUESTION # 58
What are three supported VxRail Stretched Cluster configuration? (Choose three.)

  • A. All flash on Site A and hybrid on Site B
  • B. L2 and L3 site-to-site connectivity
  • C. Two nodes and a witness
  • D. Four nodes and a witness
  • E. vSAN ESA on Site A and vSAN OSA on Site B

Answer: B,C,D

Explanation:
Both Layer 2 (L2) and Layer 3 (L3) site-to-site connectivity are supported for VxRail stretched clusters.
Configurations with two nodes plus a witness and four nodes plus a witness are supported cluster sizes for stretched clusters, providing fault tolerance across sites.


NEW QUESTION # 59
Which steps are required to use the VxRail Sizing Tool effectively?
(Choose two)
Response:

  • A. Set up RAID configurations
  • B. Select reference workloads
  • C. Import Live Optics data
  • D. Configure Fibre Channel zones

Answer: B,C


NEW QUESTION # 60
......

D-VXR-DS-00 Exam Questions – Valid D-VXR-DS-00 Dumps Pdf: https://www.actualtestsquiz.com/D-VXR-DS-00-test-torrent.html

Verified D-VXR-DS-00 dumps Q&As - Pass Guarantee: https://drive.google.com/open?id=1Xp2tky-kv-hS9fcozVQ_jI4OxZp8UdIo