[Aug-2025 Newly Released] SK0-005 Dumps for CompTIA Server+ Certified
Updated Verified SK0-005 dumps Q&As - 100% Pass
CompTIA Server+ Certification Exam is an industry-standard certification that is recognized by leading IT companies worldwide. It is also a prerequisite for advanced certifications such as CompTIA Cloud+ and CompTIA Advanced Security Practitioner (CASP+). CompTIA Server+ Certification Exam certification demonstrates that an IT professional has the skills and knowledge required to manage and maintain server infrastructure, making them more valuable to their organization and advancing their career in IT.
NEW QUESTION # 198
Which of the following can be BEST described as the amount of time a company can afford to be down during recovery from an outage?
- A. MTBF
- B. RTO
- C. MTTR
- D. SLA
Answer: B
Explanation:
The term that best describes the amount of time a company can afford to be down during recovery from an outage is RTO. RTO (Recovery Time Objective) is a metric that defines the maximum acceptable downtime for an application, system, or process after a disaster or disruption. RTO helps determine the level of urgency and resources required for restoring normal business operations. RTO is usually measured in minutes, hours, or days, depending on the criticality and impact of the service.
Reference:
https://whatis.techtarget.com/definition/recovery-time-objective-RTO
NEW QUESTION # 199
A storage administrator is investigating an issue with a failed hard drive. A technician replaced the drive in the storage array; however, there is still an issue with the logical volume. Which of the following best describes the NEXT step that should be completed to restore the volume?
- A. Format the volume
- B. Replace the volume
- C. Initialize the volume
- D. Rebuild the volume
Answer: D
NEW QUESTION # 200
An administrator gave Ann modify permissions to a shared folder called DATA, which is located on the company server. Other users need read access to the files in this folder. The current configuration is as follows:
The administrator has determined Ann cannot write anything to the DATA folder using the network. Which of the following would be the best practice to set up Ann's permissions correctly, exposing only the minimum rights required?
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: C
NEW QUESTION # 201
A large number of connections to port 80 is discovered while reviewing the log files on a server. The server is not functioning as a web server. Which of the following represent the BEST immediate actions to prevent unauthorized server access? (Choose two.)
- A. Run a checksum tool against all the files on the server
- B. Initialize a port scan on the server to identify open ports
- C. Audit all group privileges and permissions
- D. Stop all unneeded services and block the ports on the firewall
- E. Enable port forwarding on port 80
- F. Install a NIDS on the server to prevent network intrusions
Answer: B,C
NEW QUESTION # 202
Winch of the following is a type of replication in which all files are replicated, all the time?
- A. Full
- B. Constant
- C. Application consistent
- D. Synthetic full
Answer: B
Explanation:
Explanation
Constant replication is a type of replication in which all files are replicated, all the time. Replication is a process of copying data from one location to another for backup, recovery, or distribution purposes. Constant replication is also known as real-time replication or synchronous replication. It ensures that any changes made to the source data are immediately reflected on the target data without any delay or lag. Constant replication provides high availability and consistency, but it requires high bandwidth and low latency. Application consistent replication is a type of replication that ensures that the replicated data is consistent with the state of the application that uses it. It involves quiescing or pausing the application before taking a snapshot of the data and resuming the application after the snapshot is taken. Application consistent replication provides better recovery point objectives than crash consistent replication, which does not quiesce the application before taking a snapshot. Synthetic full replication is a type of replication that involves creating a new full backup by using the previous full backup and related incremental backups. It reduces the backup window and network bandwidthconsumption by transferring only changed data from the source to the target. Full replication is a type of replication that involves copying all data from the source to the target regardless of whether it has changed or not. It provides a complete backup of the data, but it requires more storage space and network bandwidth than incremental or differential replication. References:
https://www.howtogeek.com/199068/how-to-upgrade-your-existing-hard-drive-in-under-an-hour/
https://www.howtogeek.com/202794/what-is-the-difference-between-127.0.0.1-and-0.0.0.0/https://www.howtog
NEW QUESTION # 203
An administrator is unable to get server updates from a WSUS server. However, the administrator was able to patch the server successfully last month. Which of the following should the administrator check first?
- A. The primary DNS IP address assigned to the server
- B. The hosts file on the local server
- C. Stopped services on the local server
- D. The software firewall on the local server
Answer: D
Explanation:
When a server that previously received updates from a Windows Server Update Services (WSUS) server suddenly fails to do so, one common cause is that the local software firewall is blocking the necessary ports or services required for WSUS communication. Firewalls can be reconfigured, either intentionally or accidentally, leading to such connectivity issues.
References:
* CompTIA Server+ Certification Exam Objectives (SK0-005): Server Maintenance - Explain patching and update management
NEW QUESTION # 204
Users have noticed a server is performing below Baseline expectations. While diagnosing me server, an administrator discovers disk drive performance has degraded. The administrator checks the diagnostics on the RAID controller and sees the battery on me controller has gone bad. Which of the following is causing the poor performance on the RAID array?
- A. The controller has lost its configuration.
- B. The drive array is corrupt.
- C. The controller has disabled the write cache.
- D. The controller cannot use all the available channels.
Answer: C
Explanation:
Explanation
The write cache is a feature of some RAID controllers that allows them to temporarily store data in a fast memory buffer before writing it to the disk drives. This improves the performance and efficiency of write operations, especially for random and small writes. However, if the battery on the controller goes bad, the controller may disable the write cache to prevent data loss in case of a power failure. This can degrade the disk drive performance significantly, as every write operation will have to wait for the disk drives to complete.
References:
https://www.dell.com/support/kbdoc/en-us/000131486/understanding-raid-controller-battery-learn-cycle
https://www.techrepublic.com/article/understanding-raid-controller-write-cache/
NEW QUESTION # 205
A systems administrator deployed a new web proxy server onto the network. The proxy server has two interfaces: the first is connected to an internal corporate firewall, and the second is connected to an internet- facing firewall. Many users at the company are reporting they are unable to access the Internet since the new proxy was introduced. Analyze the network diagram and the proxy server's host routing table to resolve the Internet connectivity issues.
INSTRUCTIONS
Perform the following steps:
1. Click on the proxy server to display its routing table.
2. Modify the appropriate route entries to resolve the Internet connectivity issue.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Answer:
Explanation:
Explanation:
NEW QUESTION # 206
Joe. a user m the IT department cannot save changes to a sensitive file on a Linux server. An 1s -1& snows the following listing;
Which of the following commands would BEST enable the server technician to allow Joe to have access without granting excessive access to others?
- A. chgrp IT filename
- B. Chmod g+w filename
- C. chmod 777 filename
- D. chown Joe filename
Answer: B
Explanation:
Explanation
The chmod command is used to change the permissions of files and directories. The g+w option means to grant write permission to the group owner of the file. Since Joe is a member of the IT group, which is also the group owner of the file, this command will allow him to save changes to the file without affecting the permissions of other users. Verified References: [Linux chmod command]
NEW QUESTION # 207
Users ate experiencing issues when trying to access resources on multiple servers. The servers are virtual and run on an ESX server. A systems administrator is investigating but is unable to connect to any of the virtual servers. When the administrator connects to the host, a purple screen with while letters appears. Which of the following troubleshooting steps should the administrator perform FIRST?
- A. Reinstall the ESX server.
- B. Check the power supplies
- C. Review the log files.
- D. Reseat the processors.
Answer: C
Explanation:
Explanation
A purple screen with white letters on an ESX server indicates a kernel panic, which is a fatal error that causes the system to crash and stop functioning . The first troubleshooting step that an administrator should perform is to review the log files, which may contain information about the cause of the error, such as hardware failures, software bugs, or configuration issues . Checking the power supplies (A) may not be relevant, as the system is still displaying a screen. Reinstalling the ESX server or reseating the processors (D) are drastic measures that may result in data loss or further damage, and should only be attempted after ruling out other possible causes. References: 3 https://kb.vmware.com/s/article/1014508
https://www.altaro.com/vmware/vmware-esxi-purple-screen-death/
NEW QUESTION # 208
An administrator is troubleshooting connectivity to a remote server. The goal is to remotely connect to the server to make configuration changes. To further troubleshoot, a port scan revealed the ports on the server as follows:
Port 22: Closed
Port 23: Open
Port 990: Closed
Which of the following next steps should the administrator take?
Reboot the workstation and then the server.
- A. Close all of the ports listed.
- B. Open all of the ports listed.
- C. Open port 22 and close port 23.
- D. Open port 990 and close port 23.
Answer: C
Explanation:
Port 22 is used for SSH (Secure Shell), which is a secure and encrypted protocol for remote access to a server.
Port 23 is used for Telnet, which is an insecure and unencrypted protocol for remote access. Port 990 is used for FTPS (File Transfer Protocol Secure), which is a secure and encrypted protocol for file transfer. The administrator should open port 22 and close port 23 to enable SSH and disable Telnet, as SSH is more secure and reliable than Telnet. The administrator does not need to open port 990, as FTPS is not required for making configuration changes123.
References = 1: Remote Desktop - Allow access to your PC from outside your network(https://learn.microsoft.com/en-us/windows-server/remote/remote-desktop-services/clients/remote-deskt
2: Test remote network port connection in Windows 10 -
Winaero(https://winaero.com/test-remote-network-port-connection-in-windows-10/) 3: Windows Command to check if a remote server port is opened?(https://superuser.com/questions/1035018/windows-command-to-check-if-a-remote-server-port-is-opene
NEW QUESTION # 209
Users report that the FinanceApp software is not running, and they need immediate access. Issues with the FinanceApp software occur every week after the IT team completes server system updates. The users, however, do not want to contact the help desk every time the issue occurs. The users also report the new MarketApp software is not usable when it crashes, which can cause significant downtime. The technician who restarted the MarketApp software noticed it is running under a test account, which is a likely cause of the crashes.
INSTRUCTIONS
Using the Services menu provided, modify the appropriate application services to remedy the stated issues.
Answer:
Explanation:
See the solution in explanation.
Explanation
FinanceApp software is running as a service named "FinanceApp Service". The service description says
"Provides financial data and calculations for the FinanceApp software". The service status is "Stopped", which means that the service is not running and the software is not functional. The service startup type is "Manual", which means that the service needs to be started manually by the user or the administrator. The service log on as is "Local System", which means that the service runs under a predefined local account that has extensive privileges on the local computer.
To fix the issue with the FinanceApp software, you need to do two things:
First, you need to start the service, so that the software can run. To do this, you can right-click on the service name and select "Start" from the menu. Alternatively, you can select the service name and click on the "Start" button on the toolbar. You should see a message saying that the service has started successfully.
Second, you need to change the service startup type, so that the service can start automatically every time the server boots up. This way, you don't have to contact the help desk every time the issue occurs.
To do this, you can right-click on the service name and select "Properties" from the menu. Alternatively, you can select the service name and click on the "Properties" button on the toolbar. You should see a window with several tabs and options. On the "General" tab, under "Startup type", you can select
"Automatic" from the drop-down list. Then, click on "OK" to save your changes.
By doing these two steps, you should be able to use the FinanceApp software without any problems.
The MarketApp software is running as a service named "MarketApp Service". The service description says
"Provides market data and analysis for the MarketApp software". The service status is "Running", which means that the service is running and the software is functional. However, as you reported, the software may crash sometimes, which can cause significant downtime. The service startup type is "Automatic", which means that the service starts automatically every time the server boots up. The service log on as is
"TestAccount", which is a test account that was probably used for development or testing purposes.
To fix the issue with the MarketApp software, you need to do one thing:
You need to change the service log on as, so that the service runs under a proper account that has sufficient permissions and security settings for production use. To do this, you can right-click on the service name and select "Properties" from the menu. Alternatively, you can select the service name and click on the "Properties" button on the toolbar. You should see a window with several tabs and options.
On the "Log On" tab, under "Log on as", you can select either "Local System account" or "This account". If you choose "Local System account", then the service will run under a predefined local account that has extensive privileges on the local computer. If you choose "This account", then you will need to enter a valid username and password for an account that has appropriate permissions and security settings for running the service. You may need to consult with your IT team or your software vendor to determine which option is best for your situation. Then, click on "OK" to save your changes.
NEW QUESTION # 210
An administrator is configuring a server that will host a high-performance financial application. Which of the following disk types will serve this purpose?
- A. SATA SSD
- B. SAS drive with 10000rpm
- C. SAS SSD
- D. SATA drive with 15000rpm
Answer: C
Explanation:
Explanation
The best disk type for a high-performance financial application is a SAS SSD. A SAS SSD (Serial Attached SCSI Solid State Drive) is a type of storage device that uses flash memory chips to store data and has a SAS interface to connect to a server or a storage array. A SAS SSD offers high speed, low latency, high reliability, and high durability compared to other types of disks, such as SATA SSDs, SAS HDDs, or SATA HDDs. A SAS SSD can handle high I/O workloads and deliver consistent performance for applications that require fast data access and processing.
NEW QUESTION # 211
A server administrator added a new drive to a server. However, the drive is not showing up as available. Which of the following does the administrator need to do to make the drive available?
- A. Configure the drive as dynamic.
- B. Set the compression.
- C. Partition the drive.
- D. Create a new disk quota.
Answer: C
Explanation:
To make a new drive available on a server, the administrator needs to partition the drive first. Partitioning is a process that divides the drive into one or more logical sections that can be formatted and assigned drive letters or mount points. Partitioning can be done using tools such as Disk Management on Windows or fdisk on Linux. Creating a new disk quota would not help, as disk quotas are used to limit the amount of disk space that users or groups can use on a partition. Configuring the drive as dynamic would not help either, as dynamic disks are used to create volumes that span multiple disks or use RAID features. Setting the compression would not help, as compression is used to reduce the size of files on a partition. Reference: https://www.howtogeek.com/school/using-windows-admin-tools-like-a-pro/lesson2/ https://www.howtogeek.com/howto/17001/how-to-format-a-usb-drive-in-ubuntu-using-gparted/
NEW QUESTION # 212
Which of the following backup types only records changes to the data blocks on a virtual machine?
- A. Incremental
- B. Differential
- C. Snapshot
- D. Synthetic full
Answer: C
Explanation:
The backup type that only records changes to the data blocks on a virtual machine is snapshot. A snapshot is a point-in-time copy of a virtual machine (VM) that captures the state and data of the VM at a specific moment. A snapshot can be created instantly and with minimal overhead, as it only stores the changes made to the VM after the snapshot was taken. A snapshot can be used to restore the VM to its previous state in case of data loss or corruption.
NEW QUESTION # 213
......
One of the key benefits of obtaining the CompTIA Server+ certification is that it is vendor-neutral. This means that individuals who hold this certification are not tied to any particular vendor or technology, making them highly valuable to organizations that use a variety of server hardware and software. Additionally, the certification is recognized globally, making it an excellent choice for individuals who are interested in pursuing an international career in IT.
Latest SK0-005 Exam Dumps CompTIA Exam from Training: https://www.actualtestsquiz.com/SK0-005-test-torrent.html
New 2025 Latest Questions SK0-005 Dumps - Use Updated CompTIA Exam: https://drive.google.com/open?id=16_SuL_d7vkVvxELMNXUWj_WR6m6wCDKI
