Pass with professional 000-332 actual quiz materials

An administrator added a filesystem on a shared volume group using C-SPOC. The cluster is active and the resource group is on line. What is the effect of the administrator action?

• A. The cluster must be verified and synchronized.
• B. The filesystem must be mounted on a node with an online resource group.
• C. The filesystem is available immediately.
• D. Cluster services must be restarted on all nodes.

Company policy requires logical volumes to be mirrored across separate disks and controllers for resilience. An administrator needs to create a 2-node cluster with the existing partitions, LPAR1 and LPAR2.The cluster will host an application with data on a shared volume group.
LPAR1 and LPAR2 are currently hosted on a single Power 770. Each partition is assigned two integrated SAS controllers, each of which has internal hard disk drives (HDDs) that are currently used for rootvg.
Which group of actions will create a shared volume group that complies with company storage policy?

• A. Assign to LPAR1 as "desired" the existing LPAR2 SAS controller.
  Add HDDs to LPAR2 existing SAS controller disk bays.
  Create shared volume group on new HDDs, ensuring the logical volume copies are across
  separate HDDs.
  Dynamically assign LPAR2 SAS controllers to LPAR1 and update profile with adapters as
  "desired."
  Import shared volume group on LPAR1.
• B. Add HDDs to LPAR1 existing SAS controller disk bays.
  Create shared volume group on new HDDs, ensuring the logical volume copies are across
  separate HDDs.
  Import shared volume on LPAR2.
• C. Assign LPAR1 SAS controllers to dual VIO Servers.
  Add HDDs to SAS controller disk bays.
  Create virtual SCSI device for new disks and assign to both LPAR1 & LPAR2.
  Create shared volume group, ensuring the logical volume copies are across separate HDDs and
  virtual SCSI devices.
• D. Assign LPAR1 &LPAR2 two fibre adapters each.
  Zone disk from two independent storage servers to each LPAR fibre adapter.
  Create shared volume group on new HDDs, ensuring the logical volume copies are across
  separate HDDs & storage servers.

A shared volume group (VG) was created in a PowerHA 7 environment. Given the following example, what must be changed in the VG definition?

• A. Set QUORUM to 1(Disabled).
• B. Set concurrent capable to enhanced concurrent.
• C. Set hot spare characteristics to yes(one to one).
• D. Set BB POLICY to relocatable.

The service IPs VLAN is the only routable network in a 2-node HA cluster with multiple network interfaces.
What must done to enable administrative tasks to be performed remotely on the cluster nodes?

• A. Configure the boot IP Address on the same VLAN as the service IP Address.
• B. Configure a persistent IP Address for each node on the service IP network.
• C. Associate a permanent Service IP address for each HA node.
• D. Create a route on the switch and translate the Service IP address to the boot IP address using NAT.

A 2-node cluster configuration has an application server named appl. The appl server has custom application monitors named appmon_a and appmon_b.
The setting of appmon_a and appmon_b follows:
appmon_a: monitoring process=A, monitor interval=20, stabilization interval=60, restart count=1 appmon_b: monitoring process=B, monitor interval=10, stabilization interval=60, restart count=0 If process B fails 30 seconds after process A fails and successfully restarts, what is the most amount of time it will take for a failover event to begin?

• A. about 10 seconds
• B. about 60 seconds
• C. about 80 seconds
• D. about 30 seconds